Windows crashes when connecting to broadband

Similar Questions

• Windows crashes when you watch videos

  Windows crashes when I look at the videos and it will start working by itself after a while. Help, please

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select Task Manager, performance, resource monitor tab and tab memory. What are the numbers for reserved equipment, in use, modification, sleep and free?

  Is your Windows 7 32-bit or 64-bit? The amount of RAM is installed?

  

• MacBook Pro crashes when connecting to WiFi at home

  Hi all

  Short:

  When I connect to some of my macbook pro WiFi networks freezes.  By freezing I mean all input devices stop working: no touchpad, no keyboard, no external mouse, no keyboard.  My laptop stops 30 seconds after the Frost is out of the reboot.  The problem is worse at home.  He will die almost instantly if I try to use my home network.  On the road, it can take an hour or two, then freeze!  At work, life seems almost endless, but it froze.  More details to follow.

  The Machine:

  Hardware information: ⓘ

  MacBook Pro (retina, 15 inches, mi 2014)

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro11, 3

  1 2.5 GHz Intel Core i7 CPU: 4 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 194

  Video information: ⓘ

  Iris Pro Intel

  Color LCD 2880 x 1800

  NVIDIA GeForce GT 750M - VRAM: 2048 MB

  System software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disk information: ⓘ

  APPLE SSD SM0512F Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 499,06 (Go 92.99 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 499.42 GB Online

  USB information: ⓘ

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Symptoms:

  • When I connect everything first a loading bar is shown, sometimes it will freeze it and start/stop.
  • Shortly after I log in, before you do anything, but moving the mouse, it will freeze.
  • Sometimes I can not connect and it will work fine for a few minutes, until I use all that internet: firefox, safari, mail, any software that checks the license through the internet, then it freezes.
  • Other times, I can work on the internet without pain for hours.
  • Sometimes it will work very well, I will walk away and the machine goes to sleep.  When I wake up, it will freeze.  With and without the WiFi on.
  • Sometimes it will work very well, I'll close the lid for a certain period of time for 1 minute to 24 hours and sometimes when I open it it will freeze.
  • It crashed when booting in verbose mode.  Died when something with bluetooth.  I tried only once.
  • When in recovery mode (CMD + R), I can run the utility disc fine, but if I want to reinstall OS X, the minute, trying to download (after signing with my Apple ID) it will freeze.  It's the only way I've been able to reliable and predictable way to reproduce this problem, however, as on my home network.
  • There is never crash logs in the console.  I have never one "your machine should be stopped."  The only way that I know that there was a problem is that I will ask you to log in and when I do, none of my programs are still open.

  Where this happens:

  • On my work WiFi network, it's hardly a question.  Happened at least 5 times in the last year.
  • During a journey (so any number of networks and equipment) will occur once an hour.
  • At home, he can go months without a pass and then, as yesterday (24/04/16), occur continuously for hours on end.  (I have just let my laptop open and hear the chime start about once a minute).

  What I tried:

  • Reinstalled OS X.
  • Run diagnostics (CMD + D)
  • Reset the PRAM and SMC
  • Run recovery stuff (CMD + R)
  • Safe mode has the same problems; When internet is used, it freezes.
  • That thing where you delete all of your connections wifi, both in the Terminal and in the GUI.
  • Disable IPV6 on my Macbook Pro
  • The laptop is not hot.  Power supply or the battery power does not make a difference.

  Other stuff:

  • I have an old Macbook Pro (running Yosemite) who doesn't have these problems.  There is another Windows Mobile and apple and windows Phone which does not have these problems.
  • Using WiFi at home and Arris TG1682G me provided by Comcast/Xfinity.
  • My laptop froze all the time and then I went to another network (neighbor thank you!) and everything seems fine.

  As my computer can still freeze on other networks I'll post this now and change it.  I don't want to lose that.

  I can't find a button change.  Shortly after I posted this my macbook pro has frozen and restarted.  I was not on my wifi at home.

• LabVIEW crashes when connecting to NXT

  Whenever I try to connect with the NXT LabVIEW, LabVIEW hangs... I have LabVIEW 2010 and 2011, and it worked until I installed 2011. Can that be my problem?

  Thank you so much in advance.

  Alex.

  Hi ullrich85,

  Did you install the LabVIEW NXT Module 2011 yet? When does it crash when you try to connect? Y at - it no error report that appears when LabVIEW breaks down?

  http://Joule.NI.com/nidu/CDs/view/p/ID/2637/lang/en

  DylanC

• Outlook express crashes when connecting with the mail server

  Outlook express 6 crashes when the connection with the mail server, please advise, thank you!

  Try to remove your e-mail account and then close and reopen OE and then add it back again.  Make sure that antivirus sofware interfering not - see www.oehelp.com/OETips.aspx#3

  Steve

• Windows crashes when you create a large file DVD

  Windows 7 crashes when copying large files on the internal DVD drive.  Working also on a typically about 600 KB/sec transfer rate.  Takes forever.  Usually, if there is only a single file, it will copy.  If there are multiple files, it just hangs.  No error message.  Just hangs.

  How to open and use disk cleanup in Windows 7
  http://www.SevenForums.com/tutorials/818-disk-cleanup-open-use.html

  Delete all except the last system restore point.
  Click 'Start' / all /Accessories programs / System Tools / Disk Cleanup / click on the OK"" button.
  After cleaning finishes his calculations, down at the bottom left click on vand "Clean up system files" click 'OK '.
  Now click on the 'More Options' tab and in the area named "system restore and shadow copies ' click on 'Clean Up '.
  This will remove everything except the last "Restore Point."

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Speed up your system for the new year!
  http://adacosta.spaces.live.com/blog/CNS! E8E5CC039D51E3DB! 40406.entry

  J W Stuart: http://www.pagestart.com

• Power Manager 2.37 crash when connecting (with the call stack)

  Recently, I installed Power Manager 2.37 on my T400 Thinkoad (Vista x 64) and am now seeing the crash following each time someone connects to Windows. Anyone else seeing this?

  System.Windows.Markup.XamlParseException was not handled
  Message ="cannot be cast to type 'System.Windows.Controls.StackPanel' object type 'System.Windows.Controls.Image.  Error the object 'System.Windows.Controls.StackPanel' in the file of markup "PWMUIAux; component/sliderpanel.xaml. »
  Source = "PresentationFramework".
  LineNumber = 0
  LinePosition = 0
  NameContext = "Header".
  UidContext = "MenuItem_3."
  StackTrace:
  at System.Windows.Markup.XamlParseException.ThrowException (String message, Exception innerException, Int32 lineNumber, linePosition Int32, Uri baseUri, XamlObjectIds currentXamlObjectIds, XamlObjectIds contextXamlObjectIds, Type objectType)
  to System.Windows.Markup.XamlParseException.ThrowException (ParserContext parserContext, lineNumber, linePosition, String message, Exception innerException Int32 Int32)
  at System.Windows.Markup.BamlRecordReader.ThrowExceptionWithLine (String message, Exception innerException)
  at System.Windows.Markup.BamlRecordReader.CreateInstanceFromType (Type type, typeId Int16, Boolean throwOnFail)
  at System.Windows.Markup.BamlRecordReader.GetElementAndFlags (BamlElementStartRecord bamlElementStartRecord, object, element, ReaderFlags & flags, Type, delayCreatedType, Int16 & delayCreatedTypeId)
  at System.Windows.Markup.BamlRecordReader.BaseReadElementStartRecord (BamlElementStartRecord bamlElementRecord)
  at System.Windows.Markup.BamlRecordReader.ReadElementStartRecord (BamlElementStartRecord bamlElementRecord)
  at System.Windows.Markup.BamlRecordReader.ReadRecord (BamlRecord bamlRecord)
  at System.Windows.Markup.BamlRecordReader.Read (Boolean singleRecord)
  at System.Windows.Markup.TreeBuilderBamlTranslator.ParseFragment)
  at System.Windows.Markup.TreeBuilder.Parse)
  at System.Windows.Markup.XamlReader.LoadBaml (Stream stream, ParserContext parserContext, parent of the object, Boolean closeStream)
  at System.Windows.Application.LoadComponent (object component, Uri resourceLocator)
  at PWMUIAux.TaskTrayMenu.InitializeComponent)
  to PWMUIAux.TaskTrayMenu... ctor()
  to PWMUIAux.MainWindow... ctor()
  at PWMUIAux.App.GetMainWindowHandle)
  at PWMUIAux.App.App_Startup (Object sender, StartupEventArgs e)
  to System.Windows.Application.OnStartup (StartupEventArgs e)
  to System.Windows.Application. <.ctor>b__0 (Object unused)
  at System.Windows.Threading.ExceptionWrapper.InternalRealCall (delegate callback, object args, Boolean isSingleParameter)
  at System.Windows.Threading.ExceptionWrapper.TryCatchWhen (Object source, delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  at System.Windows.Threading.Dispatcher.WrappedInvoke (delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  at System.Windows.Threading.DispatcherOperation.InvokeImpl)
  at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext (Object state)
  at System.Threading.ExecutionContext.runTryCode (object userData)
  System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup (code TryCode, CleanupCode backoutCode, object userData)
  at System.Threading.ExecutionContext.RunInternal (ExecutionContext executionContext, ContextCallback callback, Object state)
  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)
  at System.Windows.Threading.DispatcherOperation.Invoke)
  at System.Windows.Threading.Dispatcher.ProcessQueue)
  at System.Windows.Threading.Dispatcher.WndProcHook (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean & handled)
  to the millisecond. Win32.HwndWrapper.WndProc (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean & handled)
  to the millisecond. Win32.HwndSubclass.DispatcherCallbackOperation (Object o)
  at System.Windows.Threading.ExceptionWrapper.InternalRealCall (delegate callback, object args, Boolean isSingleParameter)
  at System.Windows.Threading.ExceptionWrapper.TryCatchWhen (Object source, delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  at System.Windows.Threading.Dispatcher.WrappedInvoke (delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  to System.Windows.Threading.Dispatcher.InvokeImpl (priority DispatcherPriority, TimeSpan timeout, Delegate method, object args, Boolean isSingleParameter)
  at System.Windows.Threading.Dispatcher.Invoke (DispatcherPriority priority, method Delegate, Object arg)
  to the millisecond. Win32.HwndSubclass.SubclassWndProc (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
  to the millisecond. Win32.UnsafeNativeMethods.DispatchMessage (MSG & msg)
  at System.Windows.Threading.Dispatcher.PushFrameImpl (DispatcherFrame frame)
  at System.Windows.Threading.Dispatcher.PushFrame (DispatcherFrame frame)
  at System.Windows.Threading.Dispatcher.Run)
  at System.Windows.Application.RunDispatcher(Object ignore)
  System.Windows.Application.RunInternal (window)
  System.Windows.Application.Run (window)
  at System.Windows.Application.Run)
  at PWMUIAux.App.Main)
  InnerException: System.InvalidCastException
  Message = "Cannot be cast to an object of type 'System.Windows.Controls.StackPanel' to type 'System.Windows.Controls.Image'."
  Source = "PWMUIAux".
  StackTrace:
  at PWMUIAux.SliderPanel.System.Windows.Markup.IComponentConnector.Connect (Int32 connectionId, object target)
  at System.Windows.Markup.BamlRecordReader.ReadConnectionId (BamlConnectionIdRecord bamlConnectionIdRecord)
  at System.Windows.Markup.BamlRecordReader.ReadRecord (BamlRecord bamlRecord)
  InnerException:

  There are newer versions of Power Manager available, the last one I think is 2.50. You should try to install a new, to see if that solved the problem.

• Yoga Pro 3 with 10 Windows crashes when moved

  A couple of weeks ago, I did a clean install of Windows 10, and it has worked smoothly since then.

  The last day, Windows 10 has been freezing constantly. After som dig, I realized Windows froze when I moved the laptop (not to shut down or anything like that, just pick up my knees was enough). I tested my theory several times, and whenever I get the laptop to the surface it freezes.

  It only happens in Windows, tried to launch the application of recovery (outside), and I can move the laptop freely without him never freeze.

  Clues?

  Edit: oddly enough, this behavior occurs when the wireless card is enabled in the Device Manager. I can add that yesterday, after the system froze, the wifi adapter missing from Device Manager all together. Had to enable/disable in the BIOS to get it back.

  Not sure if you are happy to hear my answer, but I'm done then try to restore the computer to its factory with Windows 8.1 configuration. Surprisingly, after restoring Windows 8.1, everything worked fine again. No gel, WiFi works fine, everything back to normal.

  After that, I did a clean install of Windows 10, and it now works fine with Windows 10.

  I guess a clean install of Windows 10 would do the trick as well, but I too far on the road that I considered as returned it for repairs. As it's a PC that I use for work, I had to wipe everything before sending it anyway, so I thought that the factory reset could do this job.

• Windows crashed when switching from Windows 10

  Original title: Windows 10

  This is my story, gang...

  A few months ago my Office worked on Windows 7.  Then, the free update of Windows 10 has been offered.  So, I did the upgrade.

  After a week or two, I decided that Windows 10 just wasn't for me and opted to return to Windows 7.  I followed the quick screens (to make the transition) and during the process, Windows "crashed" and mucked up throughout the system.  This glitch has left me WITHOUT Windows operating system, be it...

  Oh and the kicker is, I had to replace the hard drive (in my desktop Dell) at least twice since I bought it.  There is therefore no way I can reinstall my old Windows 7 (because of problems product keys).  And believe me, I tried.  Having to buy a new copy of Windows is out of the question, at this time.

  Suggestions?  Everyone... ?

  Thanks for your time!

  This is my story, gang...

  A few months ago my Office worked on Windows 7.  Then, the free update of Windows 10 has been offered.  So, I did the upgrade.

  After a week or two, I decided that Windows 10 just wasn't for me and opted to return to Windows 7.  I followed the quick screens (to make the transition) and during the process, Windows "crashed" and mucked up throughout the system.  This glitch has left me WITHOUT Windows operating system, be it...

  Oh and the kicker is, I had to replace the hard drive (in my desktop Dell) at least twice since I bought it.  So no way I can reinstall my old Windows 7 (due to problems product keys). And believe me, I tried.  Having to buy a new copy of Windows is out of the question, at this time.

  Suggestions?  Everyone... ?

  Thanks for your time!

  Hello

  Do not understand what you mean by PK issues.

  But your relocation options.

  The only legal Windows 7 download available is now Microsoft, as Microsoft has stopped DigitalRiver Windows 7 ISO downloads.

  http://www.Microsoft.com/en-us/software-recovery

  But Microsoft only provides these downloads for Windows 7 keys to selling product at retail, not preinstalled OEM product keys (Dell, HP, etc.).

  As you have licensed preinstalled OEM (Dell, HP, etc.), contact the manufacturer of your computer to order recovery media that they need to provide for a fee, IF they still have them available.

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  See you soon.

• Satellite L310 - D4010 Windows XP crashes when connecting external USB HDD

  Hi friends

  I use the L310 - D4010 Windows XP machine.
  When I connect a USB external hard drive with it, it crashes. Nothing works after that.
  Please help if any similar problem with one of these in the computer toshiba laptop.

  Thanks in advance
  Joy

  Hello

  This happens with all the external USB device. for example the USB?

  You updated Win XP to the last State?

  Have you tried to connect external USB HDD to other machines with Win XP?

• Windows desktop 8: Crash when connection

  I enter the details (none), click Connect and it crashes every time.

  I tried everything, my windows is a clean install.

  Relocation, changing the settings, tried the proxy.

  Oh btw, I tried the Skype find in the store, that worked, but since it's so boring I uninstalled that.

  Here is some information from my event viewer:

  Spoiler (Highlight to read)

  Name of the failing application: Skype.exe, version: 6.0.73.126, time stamp: 0x509ce70f
  The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
  Exception code: 0x4000001f
  Offset: 0x46d00191
  ID of the process failing: 0x18c
  Start time of application vulnerabilities: 0x01cdedc2be118edb
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: unknown
  Report ID: 03b01d33-59b6-11e2-b36b-00268331f854
  Faulting full name of the package:
  ID of the failed package-parent application:

  Name of the failing application: Skype.exe, version: 6.0.73.126, time stamp: 0x509ce70fFaulting the module name: unknown, version: 0.0.0.0, timestamp: 0x00000000Exception code: offset 0x4000001fFault: 0x46d00191Faulting id of the process: 0x18cFaulting application start time: 0x01cdedc2be118edbFaulting the application path: C:\Program Files (x86)\Skype\Phone\Skype.exeFaulting path of the module: unknownReport Id: package 03b01d33 - 59b 6 - 11e2 - b36b - 00268331f854Faulting full name: flaws on a package application ID):
  Spoiler (Highlight to read)

  Name of the failing application: Skype.exe, version: 6.0.73.126, time stamp: 0x509ce70f
  The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
  Exception code: 0x4000001f
  Offset: 0x46d00195
  ID of the process failing: 0x18c
  Start time of application vulnerabilities: 0x01cdedc2be118edb
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: unknown
  Report ID: 04b7d6f5-59b6-11e2-b36b-00268331f854
  Faulting full name of the package:
  ID of the failed package-parent application:

  Name of the failing application: Skype.exe, version: 6.0.73.126, time stamp: 0x509ce70fFaulting the module name: unknown, version: 0.0.0.0, timestamp: 0x00000000Exception code: offset 0x4000001fFault: 0x46d00195Faulting id of the process: 0x18cFaulting application start time: 0x01cdedc2be118edbFaulting the application path: C:\Program Files (x86)\Skype\Phone\Skype.exeFaulting path of the module: unknownReport Id: package 04b7d6f5 - 59b 6 - 11e2 - b36b - 00268331f854Faulting full name: flaws on a package application ID):
  Spoiler (Highlight to read)

  Name of the failing application: Skype.exe, version: 6.0.73.126, time stamp: 0x509ce70f
  The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
  Exception code: 0xc0000005
  Offset: 0 x 00000204
  ID of the process failing: 0x18c
  Start time of application vulnerabilities: 0x01cdedc2be118edb
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: unknown
  Report ID: 05c0a228-59b6-11e2-b36b-00268331f854
  Faulting full name of the package:
  ID of the failed package-parent application:

  Name of the failing application: Skype.exe, version: 6.0.73.126, time stamp: 0x509ce70fFaulting the module name: unknown, version: 0.0.0.0, timestamp: 0x00000000Exception code: offset 0xc0000005Fault: 0x00000204Faulting id of the process: 0x18cFaulting application start time: 0x01cdedc2be118edbFaulting the application path: C:\Program Files (x86)\Skype\Phone\Skype.exeFaulting path of the module: unknownReport Id: package 05c0a228 - 59b 6 - 11e2 - b36b - 00268331f854Faulting full name: flaws on a package application ID):

  The same error (Exception code: 0x4000001f), then maybe the same solution:

  http://community.Skype.com/T5/Windows-8/both-Skype-app-and-application-do-not-run-properly-Windows-8...

  However, the last error (Exception code: 0xc0000005 fault offset: 0 x 00000204) is more indicative of a conflict with a device driver.

• Windows crashes when any USB device is connected

  Hello

  I have a laptop Dell Latitude D505 with Windows XP. Recently, whenever I plugged in a USB device, Windows would freeze and I have to hold the power button down to turn it off.  Since then, I tried to replace the RAM, re - install Windows on a new HARD drive and taking the other components (Wi - Fi, CD). I still don't understand why it freezes. Any ideas?
  Thank you very much!

  Hello

  1. don't you make changes to your computer, after which the issue started?
  2. have you tried to connect USB devices to a different USB port? If so, they work on other ports?
  3. have you tested the USB devices on another computer?

  Uninstall and reinstall the usb host controller driver and check if the problem persists.

  http://support.Microsoft.com/kb/283658

  I would recommend that you update your BIOS and drivers from the chipset and check if the problem persists.

  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Application crashes when connecting remotely for debugging

  Hello again all you lovers forum useful!

  I'm debugging a strange behaviour in my application that does occur on a specific computer in special circumstances.  To do this, I have enabled debugging in my application and finally was able to see it as an option in the menu "Debug Application or Shared Library" on my local computer (I had to first find out the hard way that you cannot change the name of the application and have always run in debug mode, even if you change the name of the associated also .aliases and .ini files).

  When I try to connect to my request, the "connection status" displays lists of downloading my subVIs much and then finally downloading my main VI.  At this point, my main VI façade appears on my local computer.  However, everything freezes then, while on the remote computer, my application (waiting for correctly so that the debugger start) crashes with a generic Windows "...". has encountered a problem and needs to close"message.  If I click to more information, I see that the name is lvrt.dll (my application is usually not real-time, but it uses a timed loop or two).

  I would like suggestions as to what may cause this error and how to fix it.  Unfortunately, because it's a working application I can't post my code.  I'm using LabVIEW 2010 SP1, and two computers running Windows XP.

  Thanks in advance for your time!

  -Joe

  Well, I accidentally worked around the problem, although I never found the root cause.

  My applications MS Office had put by my it Department yesterday, and now when I compile my app, it tells me that a VI integrated Excel is broken, somewhere in the NIReport.llb folder, I added to the section 'always include' my construction specification application source file properties.  I removed NIReport.llb temporarily since I do not have the part of my application which is used to make this debugging and debugging now my application works.  Weird!  I was able to successfully debug my original problem that started this whole mess, though, so I'm happy with the final result.

  Now, I just get NIReport.llb working again.  I'm guessing there are probably an updated version to match MS Office 2010, which is my new version.  I had added NIReport.llb to support using "Easy text Report.vi" for printing.  Given that my app size dropped 50% when I got him out earlier, I can get another printing option, however.  I can solicit the opinions about it, but if so I'll so, in another thread to keep this one to.

  To anyone who has been reading this thread and thinking about how to solve my problem, thank you for your time!

  Until next time,.

  -Joe

• Display drivers crashing when connecting Skype with a new monitor BenQ

  Hello, so I just got a new BenQ XL2411Z monitor and for some reason, when I connect on Skype, display drivers crash 9/10 times. If I use the old monitor and launch Skype everything works normally, but display runnning drivers the new BenQ it will crash. The only time where he didn't plant and I could make a call and play a game at the same time, when I open a video on youtube screen crashed again.

  OK so I figured out it was actually because my refresh rate is 144 Hz and Skype + amd drivers can't handle anything beyond 120 Hz. Now running at 120 Hz and it works completely fine, had nothing to do with the drivers or the version of Skype.

• The browser window shrinks when connected to the TV c720

  Hi, hoping someone can help.

  When I connect my chromebook to my TV with a cable HDMI the window of the browser is reduced in size (on the chromebook and on TV) and I can not, then expand it. Display options (when I click the icon appearing at the bottom right) are grayed out.

  I want just the browser window as full-screen, but I can't

  So I wonder - why connect to the TV causes the window to shrink, and can I recover to full size?

  Thank you!

  Cory, you're - correction of a whole, made the last of your options with the main TV, at first it still didn't look right, then I noticed that the resolution had reset to a low, when results changed to high res, bingo, it looked like your last example and is just what I tried to achieve.

  you are a star - problem solved!