Windows Defender will stop when the computer starts

Windows Defender goes off when the computer is started and occasionally when the computer is running. I bring up the Control Panel icon, click on restart and restart the program. I had this problem for a week but have not added new software for a fortnight. Everything ran happily until a week ago. I am running Windows Vista Home Basic on a Packard Bell Imedia 3312 UK computer, purchased in April 2009

Are you by chance using AVG 9.0 for your antivirus package? This version of AVG 9 automatically extinguished Windows Defender. Microsoft® Security MVP, 2004-2009

Tags: Windows

Similar Questions

  • Windows does not work when the computer starts in mode 'sleep'

    The computer is easily adjustable in standby mode when I press on the eve of my keyboard key. However, when I want to start the computer again via push any key, the screen never shows anything (just fill black and nothing can be seen). Indicators power will return to the pilot and solid seems also lit, but just nothing display on screen. I have to push the power to shut down the computer completely to restart again.

    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

    Read the info in the link above and in the "related links", including this one:

    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista, Windows Defender will stop during the complete analysis with error 0x800106ba code after the last update 08/10/2014 Definition (1.185.2582.0)

    I have windows vista home Basic. after update in full scan at end of scan it stops with error 0x800106ba something caused scan to stop, but if you do a quick scan, it works fine, is there a solution to this problem, since I've never had this problem before and I tried the suggestions of others on the forum, but without success , or maybe a new update to fix this. I am using Webroot Secure Anyhhere Antivirus program all this time. An other update of definition 1.185.2784.0 was made on 10/10/2014, but does not

    correct the error. Please need help to repair

    Jose

    After this last update for windows defender 1.185.3248.0 definition as of 14/10/2014, my full crawls of windows defender now working

    Thanks for help

  • When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

    Original title: which user account you want to use to run this program?

    I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

    There is only one user on the computer. Why has this window began to appear and can I get rid of him?

    Hello

    That you recently installed which triggers this popup message initially upwards?

    You can try to perform a clean boot and check if it helps.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to configure Windows XP to start in a "clean boot" State

    Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

  • When the computer starts, it reads configuration updates 1 3-0%; not updated since 12.8.09, showing 8070002 error

    When the computer starts, it reads configuration updates 1 3-0%, but it continues
    Latest Windows Update 12.8.09; do not update since 12.8.09
    Display of error code 8070002.
    Mechanic charged and removed the registry and advanced system care3

    Hello

    Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

    Fix Error 80070002 when using Windows Update in Vista
    http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
    Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
    http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

    ------------------------------------------------

    Check the above and you may need to use these methods to interrupt the cycle.

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

    See article below for that.

    You can use this method on the updates that have this problem.
    http://support.Microsoft.com/kb/949358

    Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
    and install it.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • WINDOWS CALENDAR DOES NOT WHEN THE COMPUTER TURNS

    Hi guys:

    I'm having a problem with Windows Calendar. In the past, when I had an appointment for a date, the calendar would turn on automatically to remind me, as soon as I turned on my computer. Recently, this has changed. Now, I can always make an appointment, but if I'm not manually in calendar, it will not attract me, the way that it used to. Obviously the parameters have changed. I don't have any idea on how to solve this problem. Can you guys please help?

    Sincerely,

    Rachael

    Hi Rachel,

    To do this, you'll want to schedule in your startup folder so that it works even when the computer starts.  Here's how.

    1. Press + R to view the race box.  Type : startup of the shell and click OK to open the startup folder.
    2. Open your menu start, find calendar and drag it into the startup folder.

    You are finished.  Now, it runs automatically when you connect.

  • How can I configure numerical Lock ON when the computer starts?

    I have a new laptop HP G70.  In the User Guide HP G70 on keyboards - C01540939.pdf, paragraph 3 using keyboards & pointing devices, Page 8 there is a note "the function of the keyboard that is active when the computer is turned off is restored when the computer turns on.   This does not work on my computer HP G70.  It always starts up the number Lock OFF.   How can I configure my computer to set the digit Lock ON when the computer starts?  I always use the number keypad and never use page up/down - button on top/bottom/right/lelt arrow.

    Also, how can I configure my computer to set the touch mouse on the computer OFF for the start.  I always use an external mouse.

    Any help would be appreciated.  It is a simple thing, but the present operation HP G70 is most annoying.

    PLEASE DO NOT CONTINUE TO MEET THIS PROBLEM!

    THE HP G70 WAS FAULTY!   EACH HP G70 HAS THIS PROBLEM!

    HP REPLACED MY HP G70 WITH a HPdv7.  THE HPdv7 PERFORMED THE DESCRIBER NERMAU LOCK FUNCTION AS IN THE HP INCTRUCTIONS.

    .

    Bob_in_PGI

    I'm surprised that nobody knows how to set the Num Lock at startup before you connect.  Where is the help of HP?

    I now have Windows 7 64 bit.

    There must be someone who knows how to do this.

    Bob in PGI

  • Explorer.exe stops when the computer is shut down

    Explorer.exe stops when the computer is shut down

    Hi DickKimberley,

    ·         What exactly happens when you try to shut down the computer?

    ·         You receive an error message error code?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

    Advanced Troubleshooting for shutdown problems in Windows XP

    http://support.Microsoft.com/kb/308029

     

    Method 2: If the method above doesn't follow the article mentioned below.

     

    Windows stops responding during Windows XP shut down

    http://support.Microsoft.com/kb/307274

    Let us know if that helps.

  • Software HP C4380 printer causes delays when the computer starts.

    I don't know what triggered the problem. I had unplugged the printer and reinstalled. Now, when the computer starts, it hangs for 2-3 minutes seeking a device to the USB location 0. That remove the HP software solves the problem. I installed with the latest HP drivers and tried to use only the printer drivers without the scanner software. If I avoids the HP software, Windows installs with a Jungo win driver that causes the same result. It could have been an update of my Windows XP Home SP3 in the meantime I demolished the printer and reinstalled, but I can't follow any other changes.

    Now the printer is useless because of this problem. HP forums suggested disabling a program of tracking of HP under Services.msc, but who has also failed to solve the problem. Any suggestions?

    check the clean boot state, this might help you http://support.microsoft.com/kb/929135

  • Node Manager does not restart the WebLogic servers when the computer starts

    Hi all

    I'm testing the new WebLogic Server version as well as of new forms and reports. I don't have much experience with WebLogic (using the Internet Oracle 10g Application) bare with me for a moment.

    I'm using Node Manager to start admin server and all the other managed servers. I also installed nodes as a Windows service manager and configured the boot parameters to include Xrs-/-Xnohup, as stated in the documentation and everything seems to work fine until I restart the server. Node Manager service starts and according to his diary, he plays startup.properties of each server, but it does not start them. Am I missing something here? I found myself in an impression that Node Manager must restart the server in case of reboot system, if the server was running when the computer has been restarted.
    Even though I don't have much experience with WebLogic, I'm not a beginner. I managed to migrate (for testing only) all the business application (more than 1000 forms and reports) of iAS 10g to the new version in two days. Application works very well and I only have problems with servers to start when the computer starts using Node Manager.

    Test environment:
    Windows 2008 Standard 32-bit
    RAM: 2 GB
    HARD DRIVE: THE 140 GB
    CPU: 2xXeon

    # nodemanager.properties
    ...
    CrashRecoveryEnabled = true
    ...

  • How to remove temporary files, waiting to be written to disk when the computer starts? __

    How to remove temporary files, waiting to be written to disk when the computer starts?

    Hi Reasman,

    Welcome to the Microsoft answers site!

    To clear pending files, select the files/folders in the 'Files to add to the CD/DVD' box and press DELETE. However, if you want to delete all files, click the CD/DVD drive and select 'Clear the staging area' from the context menu.

    You can manually delete the files that are stored in the following location:

    %USERPROFILE%\Local Settings\Application Data\Microsoft\CD Burning folder

    I hope this helps!

    Kind regards
    Gokul - Microsoft Support

  • I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

    I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

    Original title: Chameleon engine

    I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

  • Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

    Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

    The family of products Acrobat 9.x passed in mid-2013 "end of Support".
    Using Acrobat 9 of MS Project via PDFMaker stops with Office 2007.
    To 2013 Office support, you must use Acrobat XI (11.0.1) or newer.

    A good reference:
    https://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

    Acrobat Pro and Standard DC are what are currently available for purchase.

    Be well...

  • Will be that the download stops when the computer goes into sleep mode?

    Will download, install, or all these action stops when the laptop goes to sleep.

    MK

    Yes, it will be.

  • Microsoft Arc Mouse will stop when the lid is closed

    I have a samsung R505 running vista. Now, I chose to connect it to my TV with an HDMI cable. I would like to place the laptop in a cabinet under the TV and use my keyboard and mouse wireless Arc MS, but when I close the lid of the portable computer, the mouse freezes and jumps from one point to the other when he moves. This happens when the cover is open.

    I have configured windows not to sleep when the lid is closed and I checked and my mouse drivers are up to date.

    Any help on this would be appreciated. Please let me know if you would like more information on my put upward.

    Thank you
    Chris

    Hi Chris,

    You can uninstall the mouse and try to download the latest version of the software and the mouse drivers and check.

    You can read the following article and try Method 1 to uninstall the software.

    Troubleshoot installation of Intellipoint and IntelliType LifeCam software

    You may rfer to following article to download the latest version of the software and drivers.

    ARC mouse Software and Driver Downloads

Maybe you are looking for

  • Do not fix a problem! Libretto U100 and Samsung mobile

    Thanks for the reply. I have to explain my problem a little bit cause more detail than my problem persists. I even did anything.First of all, my laptop has never been installed! Just detected. The wizard just finished. Second, my sweet BT is correctl

  • Apple Store support screws?

    I'll be honest, im trying to access the storage of ram to move to two bars of 8 GB It is, I've stripped a screw on the back panel and it is impossible to get out (from my point of view). If I bring him to my store local apple, could they get the scre

  • Networking adapters no longer work after the downgrade from windows 8 to 7

    Hi, I recently downgraded my laptop (g6-2228dx) Windows 8 for Windows 7 and my network maps no longer work, and windows Diagnostics says there is a problem with the drivers.  I checked the HP Support page for my computer model, but it has only driver

  • Components are not queued

    I have a state machine in relatively simple queue with enum as my type of queue data.   All goes well for several days, but I made a few minor changes yesterday (I tried undo, I've covered everything that thought) and now I have a problem with queue

  • Import contact list

    If I exported my contacts list on my sd card, and then if I do a factory data reset I'll be able to import my contacts from sd card list?