Windows Defender won't start does not automatically, it's because I use AVG anti-virus software?

Similar Questions

• Presario CQ60 wireless services won't start does not automatically

  Hello

  The blue light does not turn on automatically when I start my laptop upward, which means that the wireless is turned on. I have to press the orange button until it turns blue and then the wireless works. Although not a major problem, it's awkward because it takes a few minutes for the wireless to kick and find the signal wi - fi etc.

  It's never happened before and I can only think it must be linked to me recently to get the card out wireless as part of the process of getting the fan to clear a jam. The wireless adapter has been connected back up ok because it does not start when you press the button, but I can't help but think that disconnection has energised it this problem, which means that it does not start automatically when the laptop is pulled up.

  I have a Compaq CQ60 running Win7 32 bit.

  Any help would be greatly appreciated - thanks in advance.

  Hello

  Try the following.

  Download and reinstall HP Wireless Assistant from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44700.exe

  When the installation is complete, restart the laptop.

  When windows rebooted, open the HP wireless Assistant, click the properties button, enter a tick against "Independent controls for wireless devices installed" and then click on the button "turn on all.

  Kind regards

  DP - K

• information store service Exchange starts does not automatically

  information store service Exchange starts does not automatically

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• Windows Defender won't start on Vista; Can 0x800705b4 & 0x800106ba errors, anyone help?

  Hello

  I am running Windows Vista Ultimate Pro and Windows Defender worked fine until Verizon has install me it is Backup Assistant. Now I can't get Windows Defender to start. I received an error 0x800705b4 initially, but now just keep we get an error 0x800106ba whenever I try to start. I went to the Internet for a solution and this is the one that I thought might work:

  Tom McC: "I had the same problem. Fixed by going to the control of the Control Panel-administrative tools - services - select Windows Defender-right click for proprietesent - choose boot options, and select automatic. To restart and no problems since. »

  But when I open the Control Panel, I had no options, said Tom McC. Not to mention that under Vista, this is:

  1. open the control panel

  2. open system & maintenance

  3. open administrative tools

  However, once there, there's no option to choose Windows Defender or ONE of my startup programs. Furthermore, when I tried of all this that I made right click has a drop down menu that says:

  1 Explorer (which showed only the administrative programs/apps tools)

  2. open (which showed programs administrative tools in the tree of the C drive)

  3 Win - Zip (which allows me to files in the administration tools, or those that it contains zip)

  4 News (which allows me to create a new folder or briefcase in administrative tools)

  That's why I came here. I am totally confused and need all the help I can get.

  Sincerely,

  Crystal Kaulbars - * address email is removed from the privacy *

  Hello

  "and Windows Defender has worked until Verizon had me install...". »

  You have an Antivirus installed; which is a necessity?

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  And here are the tips to reactivate it.

  Are you sure that your computer doesn't have any malicious software, that you don't mention using an Antivirus?

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Database service starts does not automatically

  I've set up a new service of database on a cluster of 3 nodes running 11.1.0.6 and I can start service manually without any problem, but if I bounce the database, the database service does not automatically start even if the database is running - what is the procedure to make sure that the service starts automatically with the database?
  
  Thank you

  short answer - service_name parameter. Longer answer as well as a very useful document is at http://www.ardentperf.com/pub/services-schneider07.pdf

  illustration

  SYS @ DB10G >SHOW PARAMETER SERVICE_NAMES
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  service_names                        string      db10g
  SYS @ DB10G >HOST LSNRCTL SERVICES
  
  LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 10-SEP-2008 13:41:18
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  Services Summary...
  Service "db10g" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10gXDB" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "D000" established:0 refused:0 current:0 max:1002 state:ready
           DISPATCHER 
           (ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=4370))
  Service "db10g_XPT" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  The command completed successfully
  
  SYS @ DB10G >ALTER SYSTEM SET SERVICE_NAMES=DB10G,MY_SERVICE
    2  ;
  
  System altered.
  
  SYS @ DB10G >ALTER SYSTEM REGISTER
    2  ;
  
  System altered.
  
  SYS @ DB10G >HOST LSNRCTL SERVICES
  
  LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 10-SEP-2008 13:41:48
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  Services Summary...
  Service "MY_SERVICE" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10g" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10gXDB" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "D000" established:0 refused:0 current:0 max:1002 state:ready
           DISPATCHER 
           (ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=4370))
  Service "db10g_XPT" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  The command completed successfully
  
  SYS @ DB10G >
  

  Niall Litchfield
  http://www.orawin.info/

  Published by: Niall Litchfield Sep 10, 2008 12:42 TO REMOVE the server name.

• Windows Defender won't start-get error 0 x 80070006 how he make it back

  Windows Defender does not keep error - 0 x 80070006. Don't know about vista and it wont let me reinstal Defender on the former. Help!

  Hello

  You cannot reinstall Defender

  It is part of the vista operating system

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Windows Defender: the specified path does not exist.

  What happens if when I have on windows defender, he said

  C: / Program Files/Windows Defender/MSASCui.exe
  the specified path does not exist.
  Check the path and then try again.

  Hello

  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Right click on your icon - properties - Shortcut tab and compare your configuration to the one above.

  This is the equivalent of:

  ' C:\Program Files\Windows Defender\MSASCui.exe "'

  Note the space before the P and the / slashes in your. Rob - bicycle - Mark Twain said it is good.

• Backups of Vista won't start does not as expected

  Backups of Vista were starting automatically as scheduled for the last 3 years, but now they do not start automatically.  The backup works fine when I start it manually.  I did not any changes to the schedule or to the device where the data is stored (external USB disk).  I recently put on maintenance of Vista via Windows Update, did not observe other problems.  Running Vista Home Premium 32-bit on a PC from Dell Quad with 4 GB of memory.  Any ideas on what is at the origin of the outbreak of backups to fail?

  Thank you
  zxk1

  Hello Zxk1,

  Thanks for posting in the Microsoft Answers forum! I suggest that search you your computer for any virus infection that may hinder your scheduled automatic backups. Below you will find a sew websites that provide public services that allows you to scan your computer from viruses and spyware:

  Microsoft Windows malicious removal tool
  This tool checks your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps to remove the infection if it is found. Microsoft will release an updated version of this tool the second Tuesday of each month.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ad724ae0-e72d-4f54-9ab3-75b8eb148356&displaylang=en

  SuperAntiSpyware
  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms.
  http://www.SUPERAntiSpyware.com/download.html

  Bytes of Malware Anti-malware (Freeware)
  http://www.download.com/Malwarebytes-anti-malware/3000-8022_4-10804572.html

   

  Trend Micro HouseCall - Free Online Virus and Spyware Scanner
  HouseCall is a free on-line virus scanner offered by Trend Micro, which checks if a computer has been infected by viruses, software spyware or other malicious software. HouseCall performs additional security checks to identify and fix vulnerabilities to prevent re-infection.
  http://housecall.trendmicro.com/

  Please let me know if this helps t solve your issueJ

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Process Manager won't start does not as a service

  Hi all
  We have a weekly reboot of the server, after restarting the service manager is not automatically indicating. I put the Manager as a windows service, and the file GLOBALS is uppercase only. I checked in the windows service, there is a name of service with OGGMGR1 and it is set to automatic. My error log file displays the following error:
  
  2012-10-07 04:00:40 ERROR OGG - 00665 Oracle GoldenGate for Oracle, EXT1.prm Capture: OIC runtime error select a row (status = 3113-ORA-03113: end of file on communication channel), SQL < SELECT DECODE (archived, 'YES', 1, 0), status FROM v$ session WHERE the thread # =: ora_thread AND sequence # =: ora_seq_no >.
  2012-10-07 04:00:40 OGG-01668 Oracle GoldenGate for Oracle, EXT1.prm Capture ERROR: PROCESS ABENDING.
  2012-10-07 04:00:55 INFO OGG - 01087 Oracle GoldenGate for Oracle, Manager MGR.prm: Bishop received user logoff event.
  2012-10-07 04:00:55 OGG - 01087 Oracle GoldenGate Capture for Oracle, DPUMP.prm INFO: received extract user logoff event.
  2012-10-07 04:03:49 ERROR OGG - 00664 Oracle GoldenGate Manager for Oracle, mgr.prm: OCI error the OCIServerAttach (status = 12560-ORA-12560: TNS:protocol adapter error).
  2012-10-07 04:03:49 ERROR OGG - 01668 Oracle GoldenGate for Oracle, Manager mgr.prm: PROCESS ABENDING.
  
  My env: windows server 2008R2 with GG:11.1.1.1.2, DB: Oracle 11.2.0.3
  
  Thank you

  Hello

  May be that Manager service tried to start automatically before starting the database services because you could use the credentials database in your mgr settings file.

  Use BOOTDELAYMINUTES setting in your file manager settings, this BOOTDELAYMINUTES can be used to delay the start AUTOMATIC settings until the database services are
  has started.

  This parameter is used only for Windows.

  I hope this will help you.
  Annamalai

• laptop won't start does not suddenly

  My Lenovo 3000 V100, worked perfectly until about 3 hours when I turned off the system, the battery is also very good and loads correctly.

  Now, it's just does not turn on, AC and DC. Can anyone give any suggestions on what could be the problem.

  Thank you!

  Remove the battery, plug the AC power, try to turn on the computer.

  also try to press power button two or three minutes and check that it works.

• computer windows XP won't load does not and cannot get disk recoevery to run

  After turning on my computer comes up with the Dell logo and then turns off. I tried to start in safe mode and thus to an earlier point, but nothing happens, and the processor is very quiet, so maybe it's that. My main problem is how to get all my files and folders from the hard drive...

  Hi carelesstalk,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Start the computer using the 'Enable VGA '.
  a. see the Description of the Mode of course in Windows XP startup options
  b. in the safe mode options, select "Activate the VGA Mode" and check if the computer starts.

  Step 2: If you are able to run the computer to activate the VGA Mode, then turn off the graphics card and check if the computer starts in normal mode. To do this, try the following steps:
  a. Click Start, click Run, type devmgmt.msc, and then click ok.
  b. expand display adapters, right-click on the sub element and click on disable.
  c. start the computer and check if the computer starts.

  Note: If the computer starts in normal mode, and then uninstall the video card.

  Step 3: If nothing works, then perform the repair facility using XP disk and check the result. To do this, try the following steps:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  If the problem persists and you are using a desktop computer, we you recommend removing the hard drive and connect it to another computer and then back up your data.

  For further assistance, please contact Dell support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• won't start does not after a recovery

  My G61-320US... LAPTOP CLOSED JUST BY ITSELF AND I USED IT... WHEN I PUT IT, BUT I HAD AN OPTION OF RECOVERY AND HAS DONE FOR MORE THAN 3 DAYS NOW IT DID NOT START UP AND WHEN I PRESS THE POWER BUTTON IT JUST BLINKS OUNCES AND SHE

  Do a hard reset:

  Disconnect all devices and remove all devices USB and SD cards

  Disconnect the power adapter, remove the battery and then press on and press and hold power for at least 15 seconds.

  Plug the power adapter (but do not insert the battery), press the power button.

  If the computer starts normally, close and reinsert the battery.

  It would be an idea to make the hard drive Diagnostics.

• Vista won't start does not correctly

  I just reinstalled Vista OS because my computer just kept a loop saying a recent hardware or software installation may cause a problem but I haven't installed hardware or software. After the reinstallation of Vista, I still get the same loop, but it starts not eventful. Can someone help me solve this problem? Thank you

  I hope that you formatted the HD before reinstalling, if not, then format & let auto install vista. This

  is a clean install, unplug the network cable, printers, etc. before you start. Also, if it's a desktop pc,

  replace battery MB, manual reading, & intel recommend to wait 10 minutes before a new

  installed, this clears the CMOS memory. Once thru, on reboot, reset date/time etc., as it is by default, as well as change to

  material of the add-on.

• Application services won't start does not after Oracle Applications 11i Clone

  Hi all
  
  Can someone help me on this...
  
  EBS: 11.5.9
  Database: 9.2.0.3.0
  
  After cloning oracle Application Apache, concurrent managers and other services are in place and works perfectly but my forms and reports services do not come to the top.
  It's show time when I tried to start the services. Please find below
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfrmctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adrepctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmcctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmsctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  Thanks in advance...
  SAI

  AutoConfig succeeded completely without error?

  Please see (adstrtal.sh returns timeout error [331322.1 ID]).

  Thank you
  Hussein

• vCenter service starts do not automatically after the server restarts

  Hello

  We use vCenter Server 5.5.0 build 1476327 installed by using Installation Mode on Windows Server 2008 R2 with SQL 2008 R2. All SSO, inventory service, vcenter, customer web etc, are on the same server.

  VCenter server service is set to automatic (startup type), Local System (connect as). However at the restarting windows server vCenter, vcenter service does not automatically start and it gives error in the vpxd.log below. But if we manually start the services vcenter, it works very well.

  2014 02-12 T 17: 38:49.186 + 05:30 [03016 info 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VC55DB with username vpxuser

  2014 02-12 T 17: 38:55.750 + 05:30 [03016 info 'Default'] [VdbSchemaLoader::LookupSchemaFromDB] loaded schema information and DB index

  2014 02-12 T 17: 38:59.586 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6058ed8 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12094

  2014 02-12 T 17: 39:12.034 + 05:30 [02040 WARNING opID "VpxProfiler" SWI-56f32f43 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12448

  2014 02-12 T 17: 39:24.094 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-31169898 =] VpxUtil_InvokeWithOpId [TotalTime] took 12059 ms

  2014 02-12 T 17: 39:36.549 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-6a5d128c =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12451

  2014 02-12 T 17: 39:48.618 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6d7d4b3 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12045

  2014 02-12 T 17: 40:00.625 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-55e83917 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12007

  2014 02-12 T 17: 40:12.994 + 05:30 [02040 WARNING opID "VpxProfiler" SWI - 3113 c 398 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12251

  2014 02-12 T 17: 40:25.196 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-35702e2f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2014 02-12 T 17: 40:37.852 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-4b63962d =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12646

  2014 02-12 T 17: 40:49.875 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6c4f3258 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12019

  2014 02-12 T 17: 40:56.287 + 05:30 [03016 info 'Default'] judgment of VMware VirtualCenter forcing now

  Check connectivity ODBC (SQL authentication), looks very good. Don't know what are these VpxProfiler warnings in the newspaper, after which the VirtualCenter is forced to stop.

  Please advise on this.

  Thanks in advance!

  Try to set the vcenter service in Automatic (delayed start mode) leave the sql first service started. to the Webcomic.

  hope it will settle your error. same problem I faced and fixed in this way.

  Thank you.