Windows did not find antivirus software on this computer
Installed WindowsDefender and Action Center said "windows did not find antivirus software on this computer.
It is to be expected. Windows Defender is an anti-malware program that is designed to protect you against spy-ware, and ad-ware only. However, there is no capacity for the anti-viral. You should always install an antivirus application any.
There are several free antiviruss protection applications. And here are two:
AVAST! Home Edition
http://www.avast.com/eng/avast_4_home.html
Microsoft Security Essentials
http://www.Microsoft.com/security_essentials/
Tags: Windows
Similar Questions
-
Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13. Today a mesg says: "Windows did not find antivirus software on this computer.
What should do?
Download another copy of McAfee and activate it with your existing license.
Ask for advice here: http://service.mcafee.com/Default.aspx
-
Action Center telling me that Windows did not find antivirus software on my computer. But my antivirus software is enabled.
No idea how I can get Windows to detect that my antivirus software is enabled?HelloScenario 1: As you get this message we suggest to uninstall and reinstall Microsoft essential Security on your computer and check if the problem is resolved.Scenario 2: This problem may occur if the antivirus program is not properly installed on your computer, or if it is not updated with the latest updates.Scenario 3: This could happen if your computer is affected by the horses of Trojan or virus that is not be removed from the computer.You can perform an analysis online on your computer and check for the issue.Now to visit the below link provided to perform an online scan on your computer.Scenario 4: You can install other third pary computer antivirus program because Microsoft Security Essential is just an addon of value that comes free with Windows 7.Also, you can check the link below for programs supported by windows antivirus 7.Also try to uninstall then reinstall the security on your computer program.Note: Make sure that you have a backup of the program of security with you.Thank you, and in what concerns:
I. Suuresh Kumar-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
User did not log on type on this computer. __
the problem:
Hello, trimmerda
Because you are unable to access an administrator account, unfortunately there more that we cannot do nothing because we cannot help to circumvent security.
You can back up your personal files and reinstalling Windows.
http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
"Windows could not find driver software for your device. Why that's coming up?
I'm trying to connect my printer multi-funtion-9021d Savin. I use Windows Vista as my operating system. I don't have the disc that came with the printer and the manufacturing is not help. Please help ASAP!
Hello
I'm sorry, but the manufacturer of the printer written and provides the drivers for your printer not microsoft
go to their website and search for your model of printer vista drivers
http://www.Savin.com/downloads/default.aspx?HBN=drivers
If there is no software driver compatible vista available of the manufaxcturer of the printer, you will need to upgrade to a printer compatible vista
-
RM-892 | Nokia Lumia 925 "Windows could not find driver software for your device" Win7
Anyone know how to get the Lumia 925 to install drivers on Win7 machine?Or is there a link with all the drivers out there that can be downloaded?Sorted!
-
There was an error of avg and I couldn't close it so I went to reboot the computer and he gave me the message about how window did not find my profile now I don't know what to do
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
tracybarrentine
First try a System Restore and see if that helps your situation. If you get to windows to do a system restore when you start start pressing F8 until you get the Windows startup options. Then try "Last known good configuration" see if that helps and let us know.
QQ learn manage! -
I just installed Windows 7 on a PC that I just built. Being new to Windows 7 I started to play around him and did not find any games at all. Does anyone know how to fix this?
Salvation Ita; tribal
Congratulations on a newly built Windows 7 computer. Selected games may not be that is the reason why you are unable to find all the games on the computer.
Follow the steps to turn on the games feature.
1. click on start.
2. type optionalfeatures.exe in start search.
3. place a checkmark for the games.
4. click on OK.After the computer has been restarted, check if you can play games on your computer.
See the article: features on or off Windows activate: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off
Thank you, and in what concerns:
Swathi B - Microsoft technical support.Visit our
Microsoft answers Feedback Forum and tell us what you think. -
Windows XP SP3 problem
Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.
This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. " I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?
It's certainly interesting!
If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:SHOULD work!I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:and try the SP3 Setup file again.But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:1. have you safely backed up ALL your data?2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact. -
We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might have caused this
My pc does not have a hard drive. I can't restart in any mode.
Hello
· What is the number and the model of the computer?
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed on the computer?
· What options have tried advanced startup options?
Remove all external devices such as printers and scanners connected to the computer and then try to start.
As you mentioned you don't have a CD/DVD drive on the computer and you are not able to boot in any mode, there are only two options:
a. you will need to connect external CD/DVD drive to the computer for further troubleshooting.
b. you must contact the manufacturer of the computer.
-
We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might caused ha this.
Hello ILO,.
1. When you receive the error message?
2. are you able to boot to the desktop?
3. did you of recent changes on the computer?
Method 1
If you are unable to start windows check to see if you can boot into safe mode.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Method 2
If you are able to boot into safe mode then I would suggest that you do clean boot and check.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
* - Title original - Win 7: incrementing previous backup and restore
Last week, I did a "backup and recovery" on my Win 7 64 bit computer, create a folder WindowsImageBackup 118 GB on an external HARD drive.
I like incremental backup the same material on a base weekly, I tried to do the first incremental backup this morning.However, my "Backup and Restore" menu control configuration\systeme and securite\ tells me that "Windows backup was not put in place" and that "Windows cannot find a backup for this computer", even if the external HARD disk is attached and recognized.How can I set B R & to realize progressively the same backup that I did last week? I don't want the schedule to run regularly, but will do it manually.Thank youColinHello
Did recent changes to the computer?
I suggest you to refer to these articles and check if they can help you.
What backup settings should I use to maximize my disk space? : http://windows.microsoft.com/en-NZ/windows7/What-backup-settings-should-I-use-to-maximize-my-disk-space
Backup and restore: frequently asked questions: http://windows.microsoft.com/en-us/windows7/back-up-and-restore-frequently-asked-questions
For more information:
Windows backup does not an incremental backup media when the Windows Media Player Network Sharing Service is enabled in Windows 7: http://support.microsoft.com/kb/981470
I hope this helps.
-
I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.
Shaida is my wireless modem.
How to fix this problem?
Before the resumption of connection Internet worked normally.
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/870702
It will be useful.
-
Original title: I HAVE a BLACK SCREEN. Shows an error message "Windows did not start because of an error in the soft ware: load needed DLLs for kernel."
I can't boot from the hard drive or Operating System CD. Any ideas on how to start the system to fix the error?
Hi FilippoPosato,This problem may occur if the Hal.dll and Ntoskrnl.exe files are mismatched.To resolve this problem, start your computer from the Windows CD, and then upgrade Windows on-site.For more information, see:More information on: -
Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.
Hello
· What is the number and the model of the computer?
· What is the service pack installed?
· The meadow of operating system has been installed on the computer?
· Do you remember any changes made on the computer before the show?
Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx
You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671
Maybe you are looking for
-
T - Mobile Android version 1.6
Given that T-Mobile launches today officially updated to 1.6 in the ring, OTA, are there official news on if this applies to Cliq/Dext users as well? Edit: Just read the FAQ looks like it only applies to the G1 and MyTouch. I'll leave this thread ope
-
File, folder names are not displayed in my pictures folder
Original title: file folder names Folder names are not displayed in my pictures folder
-
How to disable the touchpad on an Acer computer?
Original title: Touchpad Hello Can someone please help me and tell me how to disable the touchpad for Acer computer. I did once before, but I forgot. Thank you Jose
-
Explorer Windows constantly crashing everything while browsing
For several months now the windows Explorer has been constantly crashing just by browsing through the folders, usually prices upwards or downwards at two levels (so it can happen every two minutes if I keep trying to get into my files once it stops a
-
Hi Gurus, I am getting SIP error 481 when I called from one video jabber let say J1 to another one let say J2 but J2 doesn't answer and J1 hangs up. normally I would expect J2 stops ringing but it keeps on ringing. I am using jabber 4.6, TMS 14.2 and