Windows didn't start because the following file is missing or corrupt: < root windows > \System32|hal.dll, please reinstall a copy of the above file.
What can I do with this message:
Windows didn't start because the following file is missing or corrupt:
Thank you In Windows XP: http://pcsupport.about.com/od/findbyerrormessage/a/missinghaldll.htm In Windows Vista & 7: http://pcsupport.about.com/od/errorh/a/HAL-dll-missing-Windows-7-Vista.htm In addition, if the file is actually missing, you can try to boot from a UNIX / Linux Live CD like Knoppix and add/replace the file manually with a file from another PC running THE SAME VERSION OF WINDOWS! If you are not good with computers, you should ignore this option because it could cause serious problems. If you still want to try, and there is a hal.dll file in
Let us know if it works. Tags: Windows Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Hi FRANKGRIMES_945, What is the model of your computer? (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine. (b) thereafter, follow this link & check if you are able to start correctly on the desktop. Hope the helps of information. Windows didn't start because the following file is missing/windows/system32/config/system Windows XP Original title: repair/restore of windows?, a little confused? My brother has problems with his computer. It happens that windows didn't start because the following file is missing/windows/system32/config/system. I need to know how to do this, but for some time. Press Enter to start the configuration of Windows. Hello You can try the troubleshooting provided in the link below steps to fix the problem. How do I recover from a corrupted registry that prevents Windows XP startup http://support.Microsoft.com/kb/307545 Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows Please need help, my computer does not start. I get the following message: Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM Hello · What is the number and the model of the computer? · What is the service pack installed? · You have the windows XP Setup disk? · What is the exact error message that you receive when the computer starts in return? You can follow the procedure from the following link: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545 Just the pc does not start. It goes to safe mode, safe mode with network screen etc. and whatever i try nothing happens just of gets stuck and freezes. At this point, I tried f8 and tried debugging mode or somat and got this message Windows didn't start because the following file is missing or damaged
Please reinstall Then, I put my windows xp disk in to access the repair console and get this message DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1 (0X7F1C6080, 0X00000002, 0X00000000, 0X7F1C6080) before he gets to the screen of choice. Any ideas anyone? Looks like you have hardware failure. Start your troubleshooting by testing the material. http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic! Windows XP does not start because < root Windows > \system32\hal.dll file is corrupted I get the following error message when starting my windows XP Home PC. : Windows didn't start because the following file is missing or damaged This could be the result of a corrupt / missing hal.dll file or boot.ini file. You have your windows disc? If so, follow the instructions below. If you do not have your windows disk click HERE to create a disc of windows recovery console.
Enter load identifier: Enter operating system load options: After completing the previous steps, restart the computer, and then select the first item in the start menu. This should allow Windows XP to start normally. After Windows XP is successfully loaded, the Boot.ini file can be modified to remove the incorrect entry. I downloaded a virus on my computer that wouldn't let my computer startup message wasn't
Paul_652 What a mess! Windows windows xp could not start because the following file is missing or damaged: I don't have original cd so I downloaded from the internet. Only 1 cd when the instructions said it would be 6. that didn't work tillieme, Hi the other my system was crushed, and on restarting I got this message: Windows is not start because the following file is missing or damaged:
I've read a few articles online, but still I can not solve the problem. I don't want to reinstall XP or lose my information. can any1 give me a simple cut down on what to do (step by step). Thanks in advance. Hello Jamdutch, Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. I get this error for windows live messenger when I start msn _ (THIS APPLICATION COULD NOT START BECAUSE it could NOT FIND a d2d1.dll, PLEASE REINSTALL AND perhaps THE PROBLEM will BE SOLVED)) I HAD A PROBLEM WITH MSN 1. I DID FORMAT MY PC AND I START FROM THE BEGINNING 2. I DID ALL THE UPDATES 3. I INSTALLED WINDOWS LIVE ESSENTIALS 11 4. ONCE I INSTALLED WINDOWS LIVE ESSENTIALS 11 I BEGINS AND IT WORKS WHEN I REBOOT MY PC AND I START IT AGAIN, I GET AN ERROR SAYING (CETTE APPLICATION POURRAIT PAS DÉMARRER parce QUE ne pourrait PAS TROUVER UNE d2d1.dll que s'il vous PLAÎT RÉINSTALLER ET PEUT-ÊTRE LE PROBLÈME SERA RÉSOLU)). WHAT IS THE PROBLEM? PLEASE LET ME KNOW THAT I DON'T KNOW WHAT ELSE DO Not certain how much this will help, but Windows Live questions should be handled by Windows Live Solution Center. I hope that you will get a resolution from the experts here. file HAL.dll It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose? It depends on your hardware, but it is extremely likely that the problem (did I already say that?). I've never had to replace a file hal.dll for this problem. The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted. For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top. If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too. You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go. For example, method 1 will not work if your system does not start. You may have more luck with other "methods". If that doesn't work, then I suggest to provide a little more information about your system: Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues. Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible. Provide information on your system, the better you can: What is your system brand and model? What is your Version of XP and the Service Pack? Your system have IDE or SATA disks? Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc.. The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.) The afflicted system has a working CD/DVD (internal or external) drive? You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)? If the system works, what do you think might have changed since the last time it did not work properly? The following file is missing or corrupt: < root windows > \system32\hal.dll I have a problem with my desktop computer. my computer is HP Vectra, Intel Pentium 3 and the operating system is Windows XP Professional. The problem is: the following file is missing or corrupt: \system32\hal.dll Change the first boot of your dvd writer/rom device! http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/ http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm Error starting: < root Windows > \system32.hal.dll file missing or corrupt I used the Norton Utilities 15 on my Win XP = done many times with no problems, this time however she appeared with
I have no Win install drive as it came preoaded on my computer. Is there anywhere I can get this file to replace or am I stuck with my recover the DVD file erase all my personal files/photos etc.? Hi KevinHassin, (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine. (b) thereafter, follow this link & check if you are able to start correctly on the desktop. Hope the helps of information. How can I get a copy of the file < windows > \system32\hal.dll. How can I get a copy of the file There are 7 possibilities for the hal.dll file and the installation of XP takes the right one to match your hardware during the installation of XP. That's why replace a bit difficult because you need to know which of the 7 on the XP installation CD you need. You can guess and try things and you might get lucky, or you can try them all. That would take some time and probably be frustrating and you would need a CD bootable XP installation genuine to start the trials and errors. Replace the hal.dll file becomes even more difficult, because most of the people do not have a genuine XP bootable installation CD, even if they wanted to replace the hal.dll file. If you really want just a copy, you can understand that one you need or just copy the one you already have. Unfortunately, the Microsoft Answers don't ask for enough information when a new question is asked to provide you with a good idea for your problem not specified. For all that is your problem not specified, you will need to provide additional information. If you see the message that your hal.dll file is missing or damaged, the chances are that the file is not really missing or damaged... Windows XP just can not find the file. Fix hal.dll "missing or corrupted" message is usually not too demanding and has nothing to do with the replacement of the file. Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time. It might even be possible to solve a problem in a single response when enough information is provided. Please provide additional information on your system: What is your system brand and model? What is your Version of XP and the Service Pack? Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc.. The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.) The afflicted system has a CD/DVD drive work? You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)? What you see you don't think you need to see? What do not you think that you should see? If the system works, what do you think might have changed since the last time it did not work properly? Windows xp pro sp3 will not start corrupted boot.ini and hal.dll - please help I installed Norton 360 offred via internet was last updated. It immediately launched all applications previously disabled at STARTUP in msconfig. And shortly after he started to gives me the blue screen "to the death". This done in two days, and I was desperately trying to solve the problem by turning off almost all applications critical to running Windows XP Pro SP3, Norton and Office 2007 Home and student. I even went and tried to edit the Boot.ini file in startup and recovery under the Advanced tab in the workstation properties. Now all I get is an error message Windows cannot start because the hal.dll file is missing or damaged. I replaced it by copying a modified version of the boot sequence, while the hard drive of my laptop was enslaved to my desktp PC, but nothing helped. I can't even the Recovery Console to start on my laptop. I need HELP, please. These profile errors are usually caused by one of the following: 1-profile corruption. The user profile is damaged and that Windows cannot load. To resolve this issue, create a new user profile and move your files to the new profile. See here for more information: How to copy data from a corrupted to a new profile in Windows XP user profile 2 drives or corruption of the file system. Run chkdks /f on the volume C:. Please note that there is ALWAYS a risk of data loss when chkdsk is run on a volume, ideally, you should have a backup of your files before running chkdsk. 3 - virus or malware activity. Some of these parasites can revoke your permissions on the folder of your profile, check the permissions on "C:\Documents and Settings\Andre" and make sure you have a full control on the folder. Check this box until you try #1 or 2 above. Some of these parasites can also revoke your permissions in key areas of the registry and create real Dany on the machine that can prevent you to run some of your software. Use Regedit to load your old profile hive (NTUSER. (DAT) in your profile folder (C:\Documents and Settings\Andre\NTUSER. (DAT) and make sure you have full control over the key. In the advanced security settings to ensure that the child objects are inherit permissions from the parent and put a check mark on "replace entries permissions for all child objects...". "Click on apply and OK your way out. See here for easy to follow instructions for loading and editing of remote registry hives: http://www.rwin.ch/xp-live/regedit.htm make sure you unload the hive when you're done, otherwise the changes will not be saved. These parasites can also revoke permission on the other key of registry and system files, you can use SubInACL to restore your permissions on these key objects, see here for more information: Solve installation errors using the SubInACL tool to repair the file and registry permissions John Re: Satellite P100 - after update BIOS it does not start optical drive I have updated the BIOS to 4.70 in my P100 PSPAAE. After restarting, I expect about 10 minutes, but nothing has happened, after that the screen of the BIOS, the screen went black. I turned off the laptop only. I chose the option "start windows normal How to create or modify the spredsheet waveform I need to produce an analog output. change the ip address of HP1522 and software HP1536 of scanning on workstations We want to change the IP address of the device to network HP1522mf and HP1536mf printers/scanners. We have already installed the scanner on XP SP3 workstations software. How to configure the new IP address of the HP (printer/scanner) device on workst Differences between versions of the WRT54G Hi all What are the differences between the different versions of the WRT54G? for example, v1.0, v2.0, V3.0... V8.0, etc. Thank you. It retains this operation and I tried to reconfigure my monitor, but that does not help him I had this problem so that my operating system vista 64 died and had to bereloaded and then it was new right, but now he's screwing, once again, is very frustSimilar Questions
Please post back and we do know.
do not choose "to repair an installation of Windows XP using the Recovery Console, press on R", (do not want to load the Recovery Console). I repeat, do not choose "to repair an installation of Windows XP using the Recovery Console, press on R.
[Type Y in response to this message.]
[This is the name of the operating system. Type Windows XP Professional or Windows XP Home Edition].
Leave this field blank, and then press ENTER.
\windows\system32\config\system
You can accept it corresponds to repair this file by starting windows setup using the original Setup CD
Select 'r' in the first screen to start repair
You will need a valid XP disc to run the repair. It is possible that the PC manufacturer develop a recovery hard disk partition. You should check with them to see if it's an option. Also, some manufacturers will provide filtering alternative for a small fee. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Please reinstall a copy of the above file.
This is the Windows Live Solution Center Portal:
http://windowslivehelp.com/
One thing... they aren't this quick response to questions. I said that my personal experience. So, be patient. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
Please post back and we do know.Maybe you are looking for
