Windows Disk Utilization rule

Similar Questions

• Then Toshiba send me a new windows disk?

  I brought my laptop for Christmas, he came with a windows disk (they can be on at the bottom of the box, I'll check when I get home) but came pre-loaded with Windows Vista.
  I have a few XP discs but I don't want to go back to XP now.
  So, if I don't have a disc, is it possible to send off for one?

  I want to format due to orders does not and mutiple errors on start up.
  This and it has been incredibly slow. I tried to search for viruses with McAffe and AVG, as well as appropriate Norton and it will not find anything at all, despite the obvious sighs.

  Sorry if this is in the wrong section, I couldn't tell...

  Who and what Set Up Utility?
  Can I use it? When I start my laptop, it's by "menu boot entry.

  Hello

  > So, if I don't have a disc, is it possible to send off for one?
  I put t know what laptop you have, but I guess that your laptop was equipped with HARD drive recovery.
  This allows you to recover the laptop without using any disk recovery.

  Of course, there is an option to create an own recovery DVDs. You read operating instructions!

  From my experience, you could use the preinstalled Toshiba Recovery Disk Creator.

  Good bye

• New hard drive. Do I need windows disk?

  I have a HP Pavilion dv7 laptop and recently the hard drive has failed...

  It was running windows 7 home basic 64-bit and did not come with recovery disks.

  im going to buy a new hard drive to replace soon and I was wondering what discs do I have to get my system running again?

  A member of the family has the same exact computer and I made a recovery disk of the Panel out of it. can I use this disc to install windows or anything? I don't really want to buy hp disc because I don't want any additional programs but if I wrong choose on a windows disk $7,100.

  Yes, you need a Windows install disc. However, there may be a way to restore from the image of the system of the other computer you have, that you say is the same. I'll get back to you on how to do it later.

  You can also use the restore disc, you created from this computer.  If it is exactly the same.  I'm not sure of the legality of it, but...

• Windows Disk Manager XP SP3 sees no no new hard drive

  I added a new slave SATA drive.
  The BIOS recognizes the drive.

  Connected to the computer as the local administrator.
  Manager displays the drive.
  Windows Explorer shows the drive.  When I click on the drive, the system responds with "access denied."

  Question: The Windows DISK management does not display the drive.  That's why I'm unable to format the drive.  Help!

  I swapped the drives and tried another new hard drive.  Still having the same problem.  Is there a registry setting?  or something that prevents this?

  The BIOS must be set to SATA or RAID. Default settings don't

  include both, generally, in "Advanced chipset" nec IDE SATA &, if cela of

  the case. If nec either and have the xp installation cd, boot the pc on a cd, press F6

  key when you are prompted, install floppy SATA/RAID (provided by mfg or get to the controller)

  MFG web site), choose the setting, auto racing, reinstall, select setting, let it run, then press

  Enter the key, on the menu for the xp cd, press r for recovery console, select 1 for C: press on enter

  password, type: DISKPART DISKPART in DiskPART, select new SATA hd, create a partition,

  Press the key type, ESC: /NTFS D: (D: being hd SATA), once its format thru:

  OUTPUT

  Let xp boot, open diskmgmt.msc in msc, new L.click hd, take action, all, select

  'activate', close msc.

  In addition, the disk must be a MS-DOS floppy disk format, then install the SATA/RAID

  free software...

• How can I do to repair Windows Vista if I don't have a disk drive & asks me to insert the Windows disk and select Repair.

  I have a netbook with no disk drive that is running Windows Vista.  When I try to turn it on, it tells me that a file is missing or damaged and that I have to install my Windows disk and select repair.  Seeing that I don't have a hard drive on my computer, How can I do to repair vista windows?

  Hello

  Netbooks have the option to reinstall the operating system to when it was new.

  They have a recovery Partition on their hard drives the same as most laptops and desktops...

  You should ask the Netbook Manufactuter for particular key sequence to begin a recovery.

  Some manufacturer's instructions are to press F10 or F11 at startup; others are Alt + F10, etc..

  The installed software doesn't have knowledge written in programming to realize that you have a Netbook and you are unable to insert the disc. That's the way it is written, unfortunately: one size.

  And some more expensive Netbooks now have a DVD player.

  See you soon.

• I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista professional?

  I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista professional?

  If you bought the retail of Windows 7:

  How to replace Microsoft software
  http://support.Microsoft.com/default.aspx/KB/326246

  If Windows is preinstalled with the computer:

  If you do not install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

• The program I use is called Defraggler is a simplified version of windows Disk Defragmenter. It is not defragment my disk correctly. It is said that it has completed the defrag but it's still 23% defragmented files defragmentation

  The program that I use is called Defraggler, it was created by piriform LTD and it is a simplified version of windows Disk Defragmenter. It is not defragment my disk correctly. It is said that it has completed the defrag but it's still 23% defragmented files defragmentation. I pressed defrag again and again but he still took no action and said always full defragmentation when clearly there is no. I myself had a look at the options and settings and it should properly according to them. Any help will be kind of you. Thank you.

  http://Forum.Piriform.com/index.php?s=6f56df458b93b49ff84c76f6fcd13a05&ShowForum=19

  Kindly repost of Piriform Defraggler forums for help with their programs.

  http://docs.Piriform.com/Defraggler

  And read the Defraggler troubleshooting, info etc. at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

  You might try the Disk Defrag at the link above instead of Defraggler.

  See you soon.

  Mick Murphy - Microsoft partner

• Need to recover a file deleted by Windows Disk Protection

  Yesterday, I created an important file on a computer that has Windows Disk Protection enabled on drive C: (I wasn't aware of this). The computer, and then deleted everything is new on the C: drive, as well as my file. Since then, the computer has been restarted several times and I think that Windows Disk Protection was turned off to install a program, then turned back on, then the cache file has been removed.

  I know it's probably a plight, but is it possible to retrieve the file?

  First make sure you recycle bin to see if it is there - if so just restore and you're in business.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html (try this second - if this does not work the chances of recovery are very slim, but you can try other products if you want - it is up to you)

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I retrieve windows disk sets 7 10 windows installation

  How can I retrieve windows disk sets 7 10 windows installation

  Just download the older games of Windows7.
  See:

  Install Windows 7 Hearts, Solitaire games and more on Windows 10
  http://www.groovypost.com/howto/install-Windows-7-classic-games-Windows-10/

  This is the download page where you click on download Windows 7 games for Windows 10
  http://winaero.com/download.php?view.1836

• extract the windows disk drivers for use in 10 windows 7

  I would like to extract generic epson printer to my windows disk drivers for use in 10 windows 7. I've seen a web page that tells how to a disk of vista, but the directory and the file structure is completely different on the disc of windows 7.  A search at random through the disc gave no results.  One of you have directions on how to do it?

  How did the 24-pin generic Epson driver described in the list of Windows 7?

  I do not see a pilot "generic 24 pin" in the list of Epson drivers on my Windows 7 system, but I don't see a driver for the GENERAL-3500 Epson ESC/P 2 ver 2.0.  The GENERAL-3500 is a flatbed printer 24 pin.  Is this the driver you used?

  I ask because this driver - considered to be for "Windows 8, Windows 8.1 and later" - is available in both 32-bit and 64-bit versions in the Microsoft Update Catalog-->

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Epson%20dlq-3500

• The windows disk image burner 7 burns the large iso files to dual layer DVD?

  The windows disk image burner 7 burns the large iso files to dual layer DVD?

  Hi zuhaibyaseen,

  Follow the steps in the article.

  Burn a CD or DVD from an ISO file

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-from-an-ISO-file

• Manager for windows disk cleanup error has stopped working on windows7 64 bit.

  Original title: Disk Cleanup stops working on windows7 64 bit, can anyone help

  Hi .i am on windows 7 64 bit on my new laptop.when I run Disk Cleanup, it stops at halfway through saying Manager for windows disk cleanup has stopped working.i tried sfc/scannow command prompt, but it is no problem because it's a brand new laptop.can someone help

  Hello

  1 were you running the scan of auditor of file system as an administrator?

  2. you have any security program installed on the computer?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest to perform the disk check and check.

  a. click on Start
  b. type cmd in the start search box
  c. right-click on cmd.exe in the list programs and then select run as administrator. If you are prompted to provide a
  Administrator password or for confirmation, type your password, or click continue
  d. in the command prompt window, type the following command and press enter Chkdsk/r X:

  Note: in this command, X: is a placeholder that represents the drive letter of the volume you want to check.

  a. press y when you are prompted to check the drive the next time the system restarts.
  b. close all applications and restart the computer.

  After the computer restarts, repeat steps a through d for the other volume and then check if the disk cleanup works.

  Important: When running chkdsk on the drive if bad sectors are found, all available on which data may be lost

  See also:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  You can also try to run the analysis of auditor of files system in administrator mode.

  Method 2:

  You can also perform a full virus scan by using the Microsoft Safety Scanner and check.

  I suggest you to perform an analysis of your computer online by visiting the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Hope this helps and keep us posted.

• How to boot from a virtual Windows disk - 10 Workstation - TPG

  I am trying to boot from a virtual gpt, with windows disk 8 inside. The host is windows 7.

  I have a paragon image 12 a MS Surface Pro - Windows 8 pro.

  I have a virtual machine Windows 8 pro machine, where I created a second virtual disk, and then I imported the image of paragon in this disc. Partitions have been successfully created and virtual disk is correctly mounted and recognized. Then I attributed to this second disk LUN 0,0 and I added the line "firmware ="efi""in the configuration file." But I get: "the operating system not found '.

  Because this could be a common situation, I'd appreciate the help.

  Thanks in advance.

  You must assign manually, no support for VMware Workstation, firmware = "efi" option in the .vmx virtual machine configuration file.

• How to align mailbox Windows disks/disk vmdk files

  Hello

  
  I currently have a server with 20 virtual drives spread between 4 SCSI controllers.   The controller has 5 virtual disks assigned to it.  I would like to find a way that we can align 20 virtual disks in VM settings for 20 labeled Windows disks.  I know that you can watch channel SCSI controller so 0.1, 0.2 and align the 2nd digit with the target ID in the properties of the Windows disk, but Windows does not specify the number of buses so when the disks are the same size its impossible to verify if it is the drive or not.

  I tried a number of scripts provided here:

  http://communities.VMware.com/message/1120303

  But failed to obtain a final solution which will be in line to the top of our hard drive listed in the settings of the VM to the inclusion of WIndows disk

  My observation is this location SCSI Id 0 is always 160.le the same for the controller SCSI 1,2,3 is 192, 224 256 respectively. As we reached maximum virtual no more scsi controller scsi can be added to a virtual machine and where it should be in the order. I watch non - r2 2008 VM, 2003 and get back to you if I find any solution.

  In my test VM below is the result.

  Vmware                                       |     Windows

  ======                                             =======

  Hard drive SCSI ID |    Target location Bus number Windows Windows ID

  Hard drive 1 0:0 |               160                             0               0

  Hard drive 2 0:1 |               160                             0               1

  Hard disk 3 1:0 |               192                             1               0

  Hard drive 4 2:0 |               224                             2               0

  Hard drive 5 3:0 |               256                             3               0

  If found it useful please add points.

  Thank you best regards &,.

  REE

• VMware tools changes the Windows disk time-out value

  Does anyone know if the VMware tools installation modifies the windows disk timeout value registry key

  HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/disc/TimeoutValue should be set to 3 c (60 seconds)

  as it appears my VM have this, but my medical examinations only and is by default 10 dry?

  Yes the VMware Tools changes the value to 60 seconds. Apparently, it was introduced in 3.0.2. I have it has not noticed only a few months before.

  Duncan

  VMware communities user moderator | VCP | VCDX

  -