Windows does not connect to the internet, even if my wireless router doesn't work and playing... See the description below.

The following message has been provided during a diagnostic run:

"The router/AP wireless for your network works, but your computer is not able to use an IP address to connect to the Internet.

You will not be able to connect to the Internet, although you might be able to connect to your local network. Communicate with your network

administrator or installer of router/access point wireless to help. »

The client IP address = 192.168.1.101

Gateway = 192.168.1.1 IP address

Hello

I suggest you to follow the steps in this link and check if it helps:

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

It will be useful.

Tags: Windows

Similar Questions

  • Why windows does not connect to the Group Policy client?

    I am currently using a dell inspiron with windows 7 Edition 7720 Home premium and recently a message started to appear above my taskbar saying

    "Unable to connect to a windows service.
    Windows could not connect to the Group Policy Client service. The problem prevents standard users to log on to the system.
    As long as administrator, you can go through the system event log to see why the service failed"
    Anyone know why this is happening and how to fix it?

    The resolution is quite easy. Ignore all these tech geeks here and on other sites that just want to show how they can play with the registers - a very dangerous game.  Go to search, type in cmd, open cmd as administrator.  Type exactly this (with the indicated spaces): netsh winsock repair, and then press ENTER. You need to restart (NOT close and turn on) your computer. Bingo! Unfortunately, this condition can re - occur from time to time, as if you start your computer before you turn on your internet connection and establish a good connection.  Don't worry the fix takes about 3 to 5 minutes depending on your speed of restart computer.

  • Windows does not connect to the iphone 5 s

    Hi people,

    Unusual problem here. My iphone connects 4S connected without problem with hotspot, but not my new 5s.  I get the error message "unable to connect to the iphone 5 s.  I went through the troubleshooting but nothing helped.  I reset the network connections on the iphone too, also without success.

    I have a Dell XPS 13.

    Any help would be GREATLY appreciated!
    Thank you people.

    I know that this post is 6 months old, but my Dell would not connect for about 6 months...   Just got my Dell works.  I had to rename my iphone without spaces, numbers or the funny characters.  Settings, general...   Mine has an apostrophe in computer and space.   Dell didn't like it for some reason any.

  • I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

    Hello

    I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
    Any suggestions?
    original title: connectivity Limeted

    The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

    Your messages are a bit terse, but if I understand correctly

    • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
    • All but one of these computers can reach successfully from the Internet via the router.
    • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
    • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
    • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
    • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

    Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

    Open a command prompt window (start > run > cmd > OK)
    Type the following lines and press ENTER after each line

    Netsh reset winsock catalog
    netsh int ip reset c:\resetlog.txt

    Close the command prompt window and restart the computer.

  • My PC does not connect to the Internet, a window opens and says DNS server does not respond.

    Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

    My PC does not connect to the internet, a window opens and says DNS server does not respond.

    Hello

    Follow the steps in the article mentioned below and check if it solves the problem:
    http://support.Microsoft.com/kb/314095

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • Homer in Windows Server does not connect to the internet.

    I installed Windows Home Server on a self-built media server. Everything on the hardware is working properly. The server software is installed. The ethernet line is connected to my Linksys router. The power light is on decision-making on the case ethernet connection. The power led is on the router where the ethernet is connected. So, in my view, that the issue is not material.
    Problems:
    1. the server does not connect to the internet.
    2. my computer does not recognize the server when I install the Windows Home Server Connector software.
    3. the wizard of Linksys on my computer does not recognize the server as a "new device".

    I feel like I'm missing a driver, maybe a driver of ethernet controller, but do not know how to diagnose the problem.  I downloaded the Windows tool that identified the problems I listed, but solutions are not feasible.

    Any suggestions?

    Hi Mikey1947,

    You can check this link, try the suggestions provided and check if that helps

    http://social.Microsoft.com/forums/en-us/whsfaq/thread/15a9e657-54a3-453F-B0E7-1efa59b7feea

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Need to Smartphones blackBerry help-apps does not connect to the internet, even with UMA

    Yesterday for a strange reason my app fmylife, even my aim and msn messenger does not connect to the internet. The blackberry browser connects either, only opera mini-tout this time I am connected to my wifi at home and I UMA. Calls and texting works fine. I tried several times to switch off the connection and then turn it back on, I restarted the phone, I took out the battery but nada.

    Any suggestion or help is greatly appreciated!

    -Hillary

    Hello!

    Official information is available here:

    See you soon!

  • I can't install adobe Photoshop Elements on Windows 10. Does not connect to the internet to activate

    I recently had to reset my computer to factory settings and now have 10 Windows, but when I try to reinstall the 13 elements of Phosotshop it does not connect to the internet to complete activation.

    See link below:

    https://forums.Adobe.com/thread/1863034

    Note: Make sure you also automatically detect settings is turned on and that all other options are cleared.


    User interface of Windows 10 Proxy settings is different from the others, here is the screenshot.

    Control Panel > network.

  • Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

    I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

    The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

    C:\Users\Karen>ipconfig/all

    Windows IP configuration

    Name of the host...: KarensLaptop
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.

    Ethernet connection to the Local network card:
     
    State of the media...: Media disconnected
    Connection - a DNS suffix is specific. :
    Description...: Realtek PCIe FE Family Controller
    Physical address: 00-26 - 9th - JJ - 83 - 9 c
    DHCP active...: Yes
    Autoconfiguration enabled... Yes

    Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

    State of the media...: Media disconnected
    Connection - a DNS suffix is specific. :
    ... Description: Microsoft ISHTHP adapter
    Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
    DHCP active...: No.
    Auto connection...: Yes

    Map of tunnel Teredo Tunneling Pseudo - Interface:

    State of the media...:...: media disconnected
    Connection - a DNS suffix is specific. :
    ... Description: Teredo Tunneling Pseudo - Interface
    Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    C:\Users\Karen >

    (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

    I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

    Any advice would be appreciated.

    Hello:

    I'm glad that you were able to restore your internet connection.

    I'd go with the latest driver HP vice one from another source.

    The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

    My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

    Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

    Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

  • Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

    I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

    Hello

    Maybe this can help.

    These steps and tell us where is the breaking point.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    ----------------

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

    If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    ---------------------------

    Stack TCP/IP work should look like.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    The physical address is MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ---------------------------------------------------

    A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

    Above everything is OK, you must be able to connect to the router.

    Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

    If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

    Enable security wireless after you eat to make a functional connection.


    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

    But Google chrome works well.

    So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

    (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

    2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

  • Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

    Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

    The airport connects using DHCP in Bridge Mode

    The router address is 192.168.80.1

    Address IPv4 is 192.168.80.2

    DNS server is the same as the router, but grayed out

    Mac Mini IPv4 Address is 192.168.80.3

    IPv6 automatically configures

    Also updated the firmware of the airport; no change.

    ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

    Any ideas to fix?

    Thank you.

    Post edited by: en maschera

    but my my Mac mini does not connect to the internet.

    The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

    Hello

    Network preferences may be damaged.

    Open the Finder. In the Finder menu bar, click go > go to folder

    Type or copy paste the following text:

    / Library/Preferences/SystemConfiguration

    Click OK, and then move all files in the SystemConfiguration folder to the trash.

    Restart your Mac. See if that makes a difference.

    Your Mac will generate a new SystemConfiguration folder for you.

    Then open AirPort Utility located in HD > Applications > Utilitiies

    Make sure that both Internet and Extreme are green.

  • App-Manager does not connect to the Simulator OS Firefox on Windows 7

    OS: Windows 7

    Firefox: 28

    6.0pre8.20140112 Simulator 1.2 Firefox OS

    When I run the simulator it opens fine and I see a Firefox OS Desktop
    But the App Manager does not connect. The console at the bottom right says:

    .. localhost:56455 options (the port varies)

    .. connection timeout. Possible causes: has not clicked 'accept' (guest).

    .. .disconnecting

    .. .disconnected

    I have disabled my firewall, restarted firefox and even system - did not help
    There is a similar bug - but I don't know if we are talking about the same thing:
    https://support.Mozilla.org/en-us/questions/988385

    Thank you

    Well - I already knew these links and I can't find anything useful
    Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
    This one works very well

  • Satellite L350 does not connect to the internet, network adapter yellow exclamation

    Trying to help my Nan with his laptop...
    Model is Satellite L350-170

    Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

    She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

    All the drivers can be downloaded from the Toshiba UE driver page.
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
    Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
    Then, you will get the list of drivers.

    If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

    You asked how to remove the network card?
    Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
    Click the single LED adapter, and then press or click on uninstall button driver

  • My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

    I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

    I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

    My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

    Hello:

    If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

    Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

    If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

    Paul

Maybe you are looking for