Windows does not detect a driver for my network card

Hello. I am trying to understand what driver should I install for a network card on a HP 2000-219DX laptop. I saw the list of the drivers for it and got the file of the driver Ralink 802.11 b/g/n WiFi Adapter from another PC. I don't know how to install this or if I have to use another driver altogether. What should I do?

Hello:

You need this graphics driver for your configuration.

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101979-1&cc=us&DLC=en&LC=en&OS=4063&product=5118697&sw_lang=

If you see a device called SMBus Controller in your device manager, you must install the drivers for the AMD Chipset.

Download and install the first file in the list at the link below.

http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

Tags: Notebooks

Similar Questions

  • HP Pavilion g7-2043sf: Windows could not find a driver for your network card

    Model: HP Pavilion g7-2043sf

    Product number: B1P51EA #ABF

    Today, I did a clean install of Windows 7 on this laptop and I can't connect to internet via wifi. When troubleshooting I get this message:

    Windows could not find a driver for your network card
    Windows does not detect a network card is installed correctly. If you have a network card, drivers for the card cannot be installed correctly.
    Install a driver for your network card
     
    Collection information
    Windows Version: 6.1
    Architecture: amd64
    Time: Thursday, December 24, 2015 12:34:16

    In Control Panel, I found this information:

    Ethernet controller: the drivers for this device are not installed (Code 28)
    Hardware ID
    PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C & REV_05
    PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C
    PCI\VEN_10EC & DEV_8136 & CC_020000
    PCI\VEN_10EC & DEV_8136 & CC_0200

    Network controller: the drivers for this device are not installed (Code 28)
    Hardware ID
    PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
    PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
    PCI\VEN_1814 & DEV_539A & CC_028000
    PCI\VEN_1814 & DEV_539A & CC_0280

    I visited this side: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-2000-Notebook-PC-series/5226249/model...

    I need all drivers of network?

    Thank you.

    Hello:

    You need these drivers...

    This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

    File name: sp55979.exe

    This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

    File name: sp58586.exe

  • Windows could not find a driver for my network card

    I suddenly can't connect to the internet and instead the following message - "windows cannot find a driver for your network card.

    I have a Sony VAIO pcg-71c11m - Windows 7.

    Can anyone help please?

    My advice to you is to completely uninstall bittorrent & all torrent Downloader. I had this problem once and permantely CRASHED my computer download of torrent files. I don't do this more... There are a lot of bugs & viruses attatched with torrent files. YOUR COMPUTER WILL DIE A SLOW DEATH IF YOU DON'T STOP DOWNLOAD TORRENT FILES! Talking about the experience...

    You will need to do a system restore!

    Click on the link below...

    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

    YOUR Ray ThompsonVX WELCOME.

    Please click on 'Answer' & click the green "Yes" butten on positions that has been useful.

    Thank you!

  • my hp windows does not detect a driver controller ethernet/what should I do?

    I was recently remove things from my desktop under Add or remove programs section and I think I have acidently deleted my ethernet controller drivers, I think, and now when rise I have internet access or try it say that its does not detect any wired or wireless internet cards... Please help me im in College and I really need my computer work If it wasn't for my cell phone, I would have the same power to send this, thanks again and trully appreciate your help.

    I was recently remove things from my desktop under Add or remove programs section and I think I have acidently deleted my ethernet controller drivers, I think, and now when rise I have internet access or try it say that its does not detect any wired or wireless internet cards... Please help me im in College and I really need my computer work If it wasn't for my cell phone, I would have the same power to send this, thanks again and trully appreciate your help.

    You need to understand what the material is, visit the web page of the manufacturer (on another machine), download the software (drivers) for the hardware in the machine, copy it on this machine (USB key, etc.) and install.

  • Satellite L100-120: can not find the driver for wireless network card

    Hello world! help me cause I don't know who I can apply my probem for! I bought this laptop in Russia - and not a bad model, but I want to change the operating system in the way that I love - so I installed vista, but the note does not work well with it, then I installed Windows XP sp2 home ed, changed in the way I wanted to, but the main problem is that I had to install almost all pilots of myself-

    Toshiba modifies his notes in the way that without its own operating system video card, modem card or wifi and sound card do not work! Well, I found all the drivers except for wifi adapter - I almost tried everything but he can't help! wifi card does not work on my note!

    could someone help me in this matter?

    The laptop was supplied with the mini-PCI Intel 3945ABG card WLan. Am I wrong?
    You should look on the Intel page for Wlan drivers for the Vista operating system.
    I also found the drivers for my Intel Wlan card on the Web site.

  • Windows does not detect my Xtreme Sound 5.1 card, what can I do?

    I have a card Diamond Xtreme Sound 5.1 and windows will detect, it says to reinstall every time why.
    Thanks yo
    Ray McGavran

    Hello

    • If it works much earlier?
    • What were the changes made before the show?
    • What is you receive the exact error message?
    You can check this link:
    No sound in Windows
  • "Receive the error message" Windows cannot find a driver for your network card.

    Original title: unable to connect to the internet. Perhaps driver problems?

    I installed windows 7 on a blank hard drive.

    Everything seems to be fine. When I open solitarie it is said ' Harware acceleration is disabled or not supported by your video card driver, which could slow down the performance of the game. "
    A mistake is over that I noticed that I can not connect to internet.
    My ethernet cable is fine, he hooked directly to the wireless router. so I troubleshoot-made it and the error is "Windows could not fine a driver for your network adapter" HELP Please thank you.

    If you have recently installed Windows 7, you must also install the device drivers for your hardware.  Windows has some drivers shipped with the operating system, but away from it all.  They are not necessarily the best drivers.  For example, you may be using a generic video driver with limited capabilities.

    Looks like you need at least the network adapter and video drivers.   It is best to get their form your computer factory web site.  You need to get the Ethernet disk using another computer to get to the line at the start.

    I recommend that you check device manager and see what other devices may need to update.

  • Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

    Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Fix for CD/DVD drive missing:

    http://support.Microsoft.com/kb/982116

  • Satellite A300-24Z - windows does not detect connected sata hdd

    Hello

    Ago that I bought the new laptop Toshiba Satellite A300. A few days ago, I decided to plug in my old laptop HARD drive - drive is Toshiba MK1234GSX - my new laptop via sata to esata cable. Problem is that windows does not detect a new device, by itself, nor in the Device Manager. Is it possible to do this drive works?

    Thanks for help.

    Hello

    Have you tested other drives?
    This should be checked!

    Please go to BIOS and adjust the default BIOS by pressing F9 button in the BIOS settings.
    Save the changes, and then try again

  • BIOS Inspiron 2305 does not detect the drive in ahci mode

    The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.

    The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.

    However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.

    Can someone tell me what steps to take to do the installation?

    theFlash1932 and natacuk4

    Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!

    I was able to boot the system several times and it seems that everything works fine.

    Thank you guys for helping me solve this problem!

  • Windows does not detect the external monitor after Blue Screen of Death

    Hi guys,.

    I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.

    I use an HDMI cable to connect the laptop and the screen...

    Best regards

    Hyouka

    Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory

    is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then

    We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.

    Also, the BIOS settings are critical, uninstall the default, add new ones.

  • The settings saved on this computer does not meet the requirements for the network

    My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

    Hello Tazdmx83,

    Thanks for posting on Microsoft answers Community Forums.

    This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

    1. click on start and control access panel.

    2. double-click on network connections

    3. right click on the wireless adapter and select Properties.

    4. Select wireless networks, click the name of your wireless network and choose Properties.

    5. in network authentication, select open to disable wireless security.

    6. Please try to connect.

    If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

    http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

    Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

    If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

    Remove the driver for the card
    ========================

    1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
    2. expand "Network adapters", double-click the entry for the wireless network device.
    3. click on the "Driver" tab, click "Uninstall".
    4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
    5 remove the entries related to the wireless network adapter.

    Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

    Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    It will be useful.

    Thank you and best regards,

    Srinivas

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows 7: install a driver for your network card

    I have a Dell inspiron N5050 and I reinstalled windows 7 64 bit using an installation disc, now it does not connect to the internet. There is a red x on the network icon and my wifi never displays. When I troubleshoot, it says "install a driver for your network card.

    Download and run the Intel driver update utility:

    https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility

    It is one of the very few reliable sources of the pilots.

    Otherwise, I assume that you have already tried to use www.support.dell.com

  • my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate.

    Two days ago my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate. What should I do? Should I re install windows 7 ultimate on my computer?

    Hello

    What brand / model of the computer?

    There is no need to re - install Windows 7. You just need to install the network card drivers. Check out the link and follow the steps.
     
     
  • Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

    Hello

    My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
    I made a USB bootable with Win8 and starts very well.

    The problem is that it does not detect my SSD, so I can proceed with the installation.
    SSD appears in BIOS but not in Windows Installer.
    He said that there is a missing driver.

    I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

    I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

    What can I do?

    Thanks for the help.
    Best regards
    Bruno Moreira

    More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
    In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
    As you say, the compatibility mode is not working too, so I think there is another problem.

    However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

    But I m wondering if you would be able to install this Win 8 on common SATA HDD.
    Have you tried to format the SSD using a different computer, then install Win 8?
    Give it a try.

Maybe you are looking for