Windows does not load after the recent update

Hi ormondroydste,

Thanks for posting.

You can change the registry without Vista installation disc.

What happens when you try to use the Startup Repair tool and system restore?
Are receive you error messages and you can post on this forum?
Your backup system?

At the command prompt, you can try to type the following command, and then press ENTER:

sfc/scannow

It is the command of the System File Checker to search for the missing and corrupt Vista files that can cause the problem.

Please let us know if that helps.

Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Hi Chris. Thanks for responding.

When I try to perform a repair of the system, I get the following message:

If you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer. If you continue to see this message, contact your system administrator or computer manufacturer for assistance.

(It has no attached device).

When I try to perform a system restore, I get this message:

System Restore has failed. The system files and settings on your computer did not change.

Details: The system has failed because of an unspecified error.
Catastrophic failure (0x8000FFFF)

If I try another date, I sometimes get this message:

Not enough memory is available to complete this operation. (0x8007000E)

When I type in

sfc/scannow

I get: "there's a system repair pending which requires the restart ends." Restart Windows, and then run the sfc.

(I restart my computer, but it still won't let me inot Windows).

My system is not backed up...

Ste

Tags: Windows

Similar Questions

  • Lightroom cc 2015 does not start after the recent update on Mac Pro Yosemite

    After you download the last updated September 27, lightroom does not start on my mac.

    Used to work without problems so far.

    Tried to disconnect the last clouds and again without success.

    Thanks, that worked.

    Now, I have to do the update again hope that will work as well...

    Do you have any idea what caused the problem?

    Concerning

    Christian

    MIT thank wurde

    Hans Christian Behrendt

    2015-09-30 18:07 GMT + 02:00 rpandita [email protected]>:

    Lightroom cc 2015 does not start after that a recent update on Mac Pro Yosemite creates

    by rpandita https://forums.adobe.com/people/rpandita> in * Photoshop

    Lightroom *-see complete discussion

    https://forums.Adobe.com/message/8015642#8015642>

  • Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

    After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

    Help, please

    Hi Digambar,

    Welcome to the community of Lenovo!

    Please perform the below mentioned the troubleshooting for the troubleshooting steps:

    1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
    Note: All browsing history will be get deleted.
    2. If the problem is persists kindly update the playstore Google later.
    3. make sure that the update of the system is up-to-date.

    Please come back to us if the trobleshooting helped you.

    Thank you & best regards

  • Remote Desktop does not work after the recent update to VMWare Player, why?

    I have VMWare Player installed on a host with multiple virtual machines. I like to the DRC to the remote host and I've been in months, but in the recent update to VMWare Player, my connection to the DRC has dropped. Now when I try to the DRC to the host it hangs at "Estimate the quality connection" after I get my user name and password, but then it stops without errors or messages. I've updated the host and rebooted several times, I also tried to DRC from a computer on the same local network as the host with no result. I have a friends in exactly the same problem, connection dropped in the middle of the update and no resolution yet. Help?

    I uninstalled VMWare Player and did a clean install (rather than updating an earlier version) and the problem is solved!

  • Windows 8 will not load after the recent updates. Flashing black screen...

    Last night (14/02/2013), I installed a set of 11 updates (one option, else important) and after restarting my machine after startup logo, the screen of my computer just started flashing from black to grey (when it is grey, I could see my cursor, could move it, but could not do anything else)... He did this for almost an hour until I finally got to load the system restore my Windows 8 Pro x 64 purchased disc.

    Not only has this happened to my desktop pc (a HP Pavilion p6620f), but also exactly the same thing happened on my wife's cell phone when I have updated with the same updates later last night. His laptop computer to a laptop HP Pavilion g7-1310us. of course, I had to again do a restore of the system on lappy.
    *********************************************************
    The updates I had downloaded for both computers on 14/02/2013 are as follows:
    Important:
    (1) cumulative Security Update for Internet Explorer 10 for Windows 8 for x 64 systems (KB2792100)
    (2) security Update for Internet Explorer 10 for Windows 8 for x 64 systems (KB2797052)
    (3) security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x 64 systems (KB2789650)
    (4) security Update for Microsoft .NET Framework 4.5 on Windows 8 and Windows Server 2012 for x 64 systems (KB2789649)
    (5) security Update for Windows 8 for x 64 systems (KB2778344)
    Update security 6) for Windows 8 for x 64 systems (KB2790655)
    (7) security Update for Windows 8 for x 64 systems (KB2799494)
    (8) update for Internet Explorer for Flash for Windows for x 64 systems 8 player (KB2805940)
    (9) update for Windows 8 for x 64 systems (KB2795944)
    (10) Windows removal tool malware for Windows 8 and Windows Server 2012 x 64-based Systems - February 2013 (KB890830)
    Optional:
    (11) update for Windows 8 for x 64 systems (KB2793210)
    *********************************************************
    I would really like someone to be able to help me with this. I bought Windows 8 Pro to my laptop from my wife and also 3 other copies for my father-brother machines... and now, I had to disable the Windows updates for each of them because of this!
    All our computers are HP, maybe that has something to do with it? I do not know. Or maybe it had something to do with the fact that machines did not originally come with pre-installed Win8 (as I said above, I bought the discs retail - 5 of them).
    I really enjoy using Windows 8 and won't go down to Win7 after all my work and spent $$$.
    PLEASE ANSWER THIS QUESTION AS SOON AS POSSIBLE!

    Update:

    With the help of my friend and colleague some at CreativX.net, Greg (gsw953), which has tested this situation on a machine of his, we think we have found what was causing the problem:
    All my machines are patched (I used UltraUXThemePatcher to patch mine) to run custom themes, 3 rd-party... Of course, the patcher (all of them, not just the one I use) modifies several system files (for example the shell32.dll file and a few others), what makes your system able to run themes not digitally signed by Microsoft. This seems to be the rub.
    The way I solved this Aalders - UN-patch my system. Most patchers have an uninstall feature that uninstalls the patcher and adds by default, system files not patches in your system from backups that patch is when you have it installed. Once I did, I got all the updates, restarted, then re-patched my system and everything was fine.
    I have the feeling that this same routine can must be made (UN-patch, get updates, re-patch) whenever MS publishes major updates of Win8... It is prudent to disable automatic updates. Better to have Windows Update notifies you and lets you decide if-or-not to install... and also it's a good idea to READ THE DESCRIPTIONS OF THE UPDATES to see what they are - maybe even search them individually on the ' Net before you allow it to install.
    MS has a long history of updates that fub a system patched... it's as if they don't want look us cool themes. they want that we have all the same, default * that they provide only. Shame on them.
    Once again, in the end, the fix: Nations United-PATCH your sytem... get updates... and then re-PATCH. Worked for me. Touch wood...
  • Satellite A100 - BIOS and Windows does not start after the BIOS update

    Hello, I extend my Satellite A100 laptop BIOS.

    After update, I can't start my laptop and the BIOS will not start.

    You see the Toshiba logo?

    Was there a power failure when you updated the BIOS?

    Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

    If this does not help, you will need to send it to a Service Center for repair.

  • Satellite L300D - does not load after the BIOS update

    I had to update my bios & it seems that that wrong has been downloaded about 3% by installing the laptop just die and not to revert to.

    There is no lights & there is no noise from the laptop at all.

    Can any ideas on how I fix?

    The laptop is a Toshiba Satellite L300D

    Hello

    Well, if the BIOS update crashed you can do anything because the ROM module needs to be reflashed. This is possible only with special tools and only an authorized service provider has such tools.

    Then please contact the nearest service Toshiba and ask for help :)

  • Windows does not start after the update...

    Hope someone can help with this,

    I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

    L.Butler,
    Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
    Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP DV7-7259nr does not start after the BIOS update

    Hello

    I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

    It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

    I tried:

    -battery disconnected and power - button Power - plugged power again-> NOTHING

    -Windows key + B + Power button--> nothing

    Please help as this is the laptop I use daily in my work.

    Thank you

    If you install the electro mechanical original hard drive in it starts?

    If it has been delivered with a SSD?

    The specifications indicate that an electromechanical drive was part of the specification.

    This is where lies the UEFI environment. It is actually on the hard drive.

  • Firefox does not take after the new update homepage

    After the new update of firefox, it resets my setting of the home page that I made
    Randomly, it loads a search engine called search.conduit.comof interfalls.

    How can I stop this!

    You can check in "Windows Control Panel > programs ' recently installed programs see if something of conduct appears.

    • Control Panel > programs > programs and features > uninstall or change a program
    • Click the installed column to sort by this column

    You can open the topic: config page through the address bar and to search for the prefs that refer to led and reset associated user defined prefs ("BOLD") through the context menu on the default value.

  • HP Photosmart D110a does not connect after the software update of the router

    I'll try a restatement of my first message:

    Two days ago I had problems with my Internet service provider modem.  This problem has been solved, but leads to a second problem still does not connect to the internet.  Then with the help of technical support D-Link, an update of the software has been downloaded to my wireless router and installed and now I can connect to the internet.

    But today, I had to use my printer/scanner for 2 1/2 year, HP Photosmart D110a, it is not connected through the above wireless router.  (The blue light on the printer blinks just).  Tech support says I'm out of warranty, so I hope someone can help me here on this forum.

    Thank you!

    Glad you got it to work, please mark it as Solution accepted so that others can search and find the answer too.

  • Windows does not start after the most recent update

    I have 64 bit Vista and Office 2007. There was a group of updates for the latter in February 2011. Something in here is stop Windows at the login screen. Workes mouse and keys stick, but it won't take me to the password screen. Only way to get around it was to go in safe mode and do a system restore to remove the updates. Any suggestions?

    Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

    [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of Norton 360 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

    8 reset the advanced settings of the IE by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

    9. open Internet Explorer (32-bit) only to http://support.microsoft.com/kb/971058 [ignore APPLIES to section] & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    10. restart once again & test.

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows does not load after update

    I just installed windows vista on my calculation, after that I return it. I had to reinstall windows and every time I do the windows update it restarts and when it turns back all that I get is a black screen with nothing load on this subject?

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows does not load after Windows update on January 8, 2010

    Basically, I've updated windows last night and is gone to bed and after I myself woke up and turned on the computer, windows won't load.

    There was an option to repair, but he says "Startup Repair cannot repair this computer automatically.

    So I ran the hardware test and everything was fine.  I tried to do a system restore... but it is come to the same, exact screen stating that «Startup Repair cannot...» ». I tried to run in safe mode and exactly the same result.

    I don't want to try to restore the computer to factory settings and lose everything I have.

    Help, please!

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include Error Codes, as appropriate, and exactly what happened when you did the update last night.

    In this way, you will receive the best help.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the worst happens, follow these steps below for data recovery before reinstallling:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • ENVY M6 - 1184ca: 8.1 for Windows does not start after the installation of update KB2919355

    Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,

    DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14 

    and then

    DISM / online/cleanup-image /startcomponentcleanup

    So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.

    I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.

    Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.

    When people ask me "What's up?", I always say 'the CAP '.

    So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.

    Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.

Maybe you are looking for

  • store data in an excel export

    Hello I'm trying to save data in a table, but when I export in an excel data sheet, I saw only last results (same results on every lines)... Please can someone help me on this issue... I want to keep my results for each measure... See attached my VI

  • Dell server reference

    Buongiorno, abbiamo ST UN server: G376KY1 con 3 door. Sopra ogni porta usually e accesa una lucina verde. Da yesterday, due sopra door, the lucina verde e ad where Reed arancione. By he restaurant non abbiamo altri if. Copy the ha effettuate senza if

  • Cannot install fsx acceleration

    I bought fsx gold today. The installation of the game works fine but when I try to install acceleration at about 98%, an error appears. 'an error occurred during the installation of assembly' can anyone help? Karlo.

  • PowerCLI parallel commands

    Hi guys,.I'm not quit sure how to handle.   I'm trying to connect to esxi hosts to sync away from the virtual computer in suspend mode.  Which works very well.But he does just 1 in an hour and not in parallel.I'm not sure how I have to change the cod

  • SOS! Need help? Error [43]

    Good afternoon! Really need help! When the creative cloud loading and loading are interrupted writing "error 43! I already cleaned, I deleted all the files that are associated with Adobe! Thank you, Alexander[Title edited for clarity... MOD]