Windows does not recognize Optical Drive SH-S222A

Similar Questions

• Windows does not recognize extended drive

  I am running Windows 7 Ultimate 64 bit in VMware Fusion version 3.13 on a Mac OSx Lion with 8 GB of RAM (4 GB for Win) and a 1 TB drive.

  Windows has been short of disk space available, both in the menu of VMware: Virtual Machine--> hard disk--> hard disk settings... I used the slider from 40 GB to 60 GB.

  I then shut down Windows and VMware, but after Windows restarts, it does not recognize the additional 20 GB. Is there something else that needs to be done - as a Windows partition utility?

  Yes, inside the prompt, you must run the disk to initialize/develop/format the partition manager.

  Right click on my computer--> Manage.  Select disk management.

• Windows does not recognize CDRWDVD PBDS DH-48C2S as a CD burner

  Hi all

  As it is said in the topic I have CD burning problems as Windows does not recognize my drive as a CD burner.

  First my system:

  Dell Optiplex 755

  Intel Core 2 Duo

  E6750 @ 2 .66GHz

  980 MB RAM

  XP Pro SP2

  When I put a CD - RW in the drive is not recognized at all (when clicking on the drive in Windows Explorer, once the disk in it says "D:\ is not accessible.  Incorrect function. »).  I put no Virgin CD in the drive and browse the content very well via Windows Explorer.  Another reason why I know that Windows does not recognize the drive as a CD burner, it is that when I open Windows Media Player and click on burn, he says the following above the Virgin to burn: "connect a burner and restart the player.

  The drive appears as working properly in Device Manager.  I think the problem is that it uses the generic drivers following windows that appear not to be CD RW drivers:

  C:\WINDOWS\system32\DRIVERS\cdrom.sys

  C:\WINDOWS\system32\DRIVERS\imapi.sys

  C:\WINDOWS\system32\DRIVERS\redbook.sys

  C:\WINDOWS\system32\storprop.dll

  It isn't a hardware problem, since we have three of these exact same new computers with the same model CD/DVD drive and the problem exists on all three PCs (so the probability that each have three new PC a failed drive is tiny).

  Unfortunately I can't find a updated driver/firmware update for this model of hard drive anywhere on this site or when I googled the model.  I tried uninstalling the drive through Device Manager, then restart the computer so that Windows reinstall it but the problem persists.

  Anyone know how to fix this?  Can someone point me to a generic Windows XP CD RW driver because that might solve the problem?

  Thank you.

  
  

• Windows does not recognize my card or my camera drive

  Windows does not recognize my sd card reader or my camera.   I have no problem with all the other devices such as printer, Mp3 player (all) external drives.

  Thank you

  Laurie.

  Hi Laurie,

  ·         Have you tried to connect the card reader on different USB ports on your computer?

  We will check if the following is useful.

  Method 1: Try to connect the flash drive to different USB ports on the computer and check if it helps.

  Method 2:

  Step 1: Try to reinstall the USB controllers and check if it helps.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager. Expand the Bus USB controllers section by clicking on the sign «+»

  c. each of the devices under the USB controller section uninstall by right-clicking on each one, then click on uninstall.

  d. close Device Manager, and then restart your computer. Windows XP re - automatically installs the USB controllers in your computer, so you don't have to do anything further. Your computer is now running properly USB devices.

  Step 2: Log on to the manufacturer's Web site and update the latest chipset drivers and other updates to the device driver.

  See also:

  How to manage devices in Windows XP

• When I go to move file e drive windows does not recognize the format

  ORIGINAL TITLE: files and folders

  running windows xp pro version 2002 service PAC 3, when I go to move the file e disc windows does not recognize the format, already file types are jpeg and php have tried a restore and fix computer center has not helped. Any suggestion or solutions would be appreciated ARTuro_974

  Thanks to all the answers, don't know how, but the problem fixed, have learned a little about pc THANKS AGAIN to all.

• Satellite A100 PSAA5A Windows does not recognize ethernet controller

  Hello

  I'm having a problem with a PSAA5A-01H00T A100 running Win XP sp2.
  Windows does not recognize an ethernet controller, so the wireless NETWORK card does not work, even if the wired connection is.
  I tried to install the latest WLAN drivers on the support site (two of them), does not. Windows insists that the correct drivers are not installed.

  I suspect a hardware problem and I have the user on an external wireless NETWORK card, but I would appreciate any idea that you guys can provide.

  Thank you.

  Hi mate

  What Ethernet controller is not recognized? WLan or LAN?
  You have a few unknown devices in Device Manager?
  If so, then a critical driver is missing, and so the controller is not recognized correctly.

  You n t know what LAN or Wlan chip you have and what driver is needed?
  Check this box:

  How to identify an unknown device (e.g. LAN wireless module)?
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  I get the following message when I join my computr "one of the usb devices attached to this computer has malfunctioned and windows does not recognize," my nokia C3
  kindly help

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP G60-235DX notebook pc does not recognize the drive d (cd - dvd drive)

  I'm reading a music cd in d drive.  My computer does not recognize the drive.  I can solve this problem?

  Press the Windows Logo key and the R key to open the run.

  Type;  regedit, and then click OK

  Navigate to:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  With the right button of the upper filters button, if necessary, and then click 'remove '. Click on the Yes"" button.

  Click the lower filters key, if present and click 'delete '. Click on the Yes"" button.

  Try again your CD.

• Windows does not recognize a blank disc in the DVD player.

  When you try to burn a CD and have a blank CD - R into the DVD player, I get 'Windows cannot read the disk in drive D ". I tried other discs and DVD, but it seems that Windows does not recognize a blank disc. I have another DVD drive and the same is true here as well.  I tried to update the drivers and deactivation and reactivation of readers but nothing is done. However, CDs or DVDs with the content are recognized.

  I had the same problem on Windows 7 32-bit (suspect this fix as well under Vista). After trying everything under the Sun entered Services (search for programs and files, type 'Services') and looked "Shell Hardware Detection. Found that it was disabled (not sure how he got that way). Right-click on it to get the properties. Change startup type to "Automatic", press apply then OK. Problem solved without even having to restart!

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows does not recognize the USB key for backup

  Windows does not recognize my USB drive for backup. Windows seems to give this option, but requires that I have to use a disc in drive D. How can I change this?

  Original title: Windows 7 backup

  With USB installed & in the office, go in run, type: diskmgmt.msc

  MSC, locate & L.click on hardware, go to actions, all, select: activate

  closing of msc