Windows does not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally

Similar Questions

• HP pavilion n003tx: MY HP laptop does not shut down properly after installing windows 10

  My HP laptop worked perfectly with windows 8.1. After the upgrade to windows 10 is not shut down properly. Power and wireless signals is always bright and also consumes the battery.  I need to press the button for at least 4 seconds power in order to stop completely.

  Is there any possibility to get rid of this problem

  Spoiler (Highlight to read)

  

  

  When I disabled the quick start in power options > it works very well with a certain delay before start-up

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Qosmio G50 - Windows does not shut down without memory stick inserted

  I have a Qosmio G50 running Windows 7. The pc does not stop unless I have my USB stick inserted. Without the USB, I can tell the pc to stop. Without the inserted stick, the pc will say that it stops and remains on the screen closed for 10-15 minutes and then restart.

  However, as soon as I put the USB into the USB port, the pc will stop within 2 seconds.

  It is not easy to understand the situation and explain why this happens.
  Qosmio G50 is not latest model cell phone, so I can't imagine that this strange question comes on the first day.

  Something like this can be done with the factory settings. The configuration, preinstalled software, background running applications and processes on your Qosmio OS are not known to us is not easy to help you with this.
  Somehow, I think that something running in the background blocks of the system. Unfortunately, I can't say what that would be.

  Check a bit.
  By the way: have you noticed the behavior even if you try to use standby or hibernation mode?

• computer will not shut down correctly after the installation of cloud creative, cc of lightroom and photoshop cc.

  Recently, I installed the trial versions of cloud creative, cc of lightroom and photoshop cc and noticed that my computer would be closed in an orderly fashion.  It either freezes once I chose the option stop or displays the message Windows is going down, but then freezes.  Here are the latest articles that I installed before this problem and I have not made further changes to my computer.

  Hello

  Please remove Creative Cloud app and Adobe Application manager using the-

  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• No battery indicator and the laptop does not shut down after closing the lid

  After returning from my lapyop return to caused by a virus factory settings I can't have my defiler of battery on my taskbar

  and also I got my lap top programmed to close on the cover but can't find where to put in place

  Hello

  I suggest you to visit the web link below to change the change the power button cover option.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-what-happens-when-you-close-your-mobile-PC-lid

  Once you have visited the link above, try the method to display the power plan options and then search forcover and the power button and choose your preferred option.

  Hope the helps of information. Please post back and we do know.

• PC HP ENVY 15 x 360: hp laptop does not shut down when I click on stop.

  I wanted a HP for almost two and it will never stop by pressing stop.  Screen goes black but the fan continues to run.

  Only way to get it to stop is to hold the power button / stop for 6-7 seconds

  Hello

  If your laptop has an Intel chipset, try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• The printer door does not shut down after printing

  HP Envy110 model D411c.    I printed out a page, the door opened, the extension arm is released, but was partially blocked. The printed page in the status bar and was recovered, the extension arm retracted, but the printer door has not closed completely.  I printed the pages since then, everything works well except for the door.  It closed partially and stops.  No warning appears on the screen.  I have to close to allow the doors close. Help!

  OK, I have a solution thanks to the autonomy and the helpline UK. At least, it works for my desire 120th All In One.

  The door / cover will always return to the position where the task was started. I don't remember to start work with the Panel in the raised position, but apparently I did.

  Solution: With the printer, gently push the door closed. Now print or copy. As the work that started with the door closed, he will return to this position even when the work is completed.

  Why oh why is anybody's guess. Good luck!

• Opening a link using "Open link in a new window" does not work. I can only use option 'open in a new tab '. Is this normal with the Firefox 4?

  I have really no more info. When I upgraded my Firefox to the latest version I noticed that I can ' t use this open in a new window option. I reinstalled the software using the U.S. English version (first time I chose the UK English version), but in vain.

  I solved the problem by disabling the Yahoo toolbar extension.

• Windows vista (Home premium) is not shut down or restart

  The computer (with windows vista edition Home premium); NVIDIA Geforce 8400 M GT GPU) is not shut down or restart. I suspect it's due to updates of windows do not. The error code that is more common that I've seen is A 80071, 91, and then other codes of error like 80071A2C. Here are updates of security for vista and internet explorer. Please help on this issue so that the pc starts shutting down as usual.

  Thank you

  "md123456" wrote in message News: 0d2c53df-b4e6-41b0-8773-211803475406...

  Thank you very much. Would be a new instal OS solve these problems?

  If you mean a new facility on a reformatted drive or a system recovery using recovery of the manufacture process, Yes, certainly, unless it's a hardware problem - but then you learn nothing about what caused the problem in the first place and so how do I prevent it from happening again.
  WRT your mistakes: -.
  1. nothing to worry about, as most of the machines do not have parallel ports today (unless yours does?)
  (2) it is difficult to talk about this, without more details-, but because they say "dependants", rather that "unload", it can probably be ignored.
  (3) it seems normal - I've seen a lot of PC with this error, and apparently nothing wrong. -It is important only if you are connected to a domain server
  (4) the service (I think) is a result of system crash, rather than a cause of the grip.
   
  It seems that the cause of this will remain a mystery.
  My earlier concern about SR doesn't work not just because of problems still standing stop - but back your data first, so that if the worst happens and you cannot start the system later, you can go to plan B.
  As Lorien says, try a back system restore to before the problem started - although at 2 months, I would worry about the stability of the system later. Since you already said that you are willing to do a reinstall if necessary, give it a whirl :)
   
  HTH
   
   
   
   
  
  --
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• Windows Media Center EPG does not have the correct data

  Windows Media Center EPG on my computer is so ugly!

  Description is separated in two, and it's always the last part that displays first, so you'll have to roll down to the bottom to read the description.

  The series is difficult to use, because the series 1) is not always marked as series (so you can select 'plain' Record), and 2) the title contains often series of numbering (e.g. "the bodyguards (1:6)"), so even if it is marked as a series, it will record ever "Guards body (2:6)" or other titles (the Media Center will just try to record any episode of "Bodyguards (1:6)").

  It is the broadcaster who create * data, and then displays in Media Center via Broadcasting Dataservices Ltd., or who are the last to blame?

  What is MS Media Center that does not have the correct data?

  I am in Denmark, if this has an impact on the response.

  Thank you and best regards!

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to post your query on our MSDN Forums, as this issue should be better there.

  Please refer to the reference to the link below to send your request:

  http://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information helps.

• GetDeviceCaps does not give the correct pixel factor in windows 7.

  GetDeviceCaps does not give the correct pixel factor in windows 7, if I use 96 dpi settings means it gives the pixel as 1 factor and if I user the 120 dpi settings means that he must give the factor 1.25 pixel, in windows xp, I had good factor with GetDeviceCaps but in window7, it returns 1 instead of 1.25 pixel factor can someone help me with this problem

  ScreenDPI.x = GetDeviceCaps (ScreenDC, LOGPIXELSX);
  float PixelX = (float) ScreenDPI.x/96;

  Hello

  I would like you to post your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/threads

  I hope this helps.

• Because the computer may not shut down properly the recovery fails on HP G60-519WM

  1.) product name and number: HP G60-519WM

  (2.) operating system installed: Windows 7 64-bit

  (3.) error message:

  Impossible to restart the computer

  Windows cannot restart the computer in the

  To complete Windows recovery environment the

  recovery operation.

  4.) all changes to your system until the problem was happening:

  I think I have a type of malware or something because my computer started running slower and I continue to be redirected to Web sites randomly when I use Google or Bing.  Records on the right side of my Start menu as 'Computer' and 'My Documents' disappeared.  I also get this an update for Windows live which stops at 57%.

  Problem:

  There is no restore point on my computer if I want to perform a system recovery back to the image of the manufactuer.  I downloaded the USB recovery Flash Disk Utility for my model.  Now I want to recover my computer via USB, but when I run the advanced recovery mode he's trying to restart my computer.  Given that my computer will not shut down properly, I end up having to press the power button until it stops my computer and the recovery does not continue when I start my computer again.

  I tried to use F11, but then I just end up on a screen that says either press on enter to choose to continue with Windows 7, press tab to move to the bottom of the list or press ESC for more options.  I tried all three and they eventually freeze the screen and keys are starting to make a Summit high-pitched beep when I try to press one, so I end up having to force my laptop to stop.

  I also tried to make recovery by pressing F8 and then choosing the "repair your computer option.  Which causes my computer screen go black, and I end up having to force it to close again.

  Is it possible to restore my computer to factory settings?

  Any help would be greatly appreciated!

  JES

  Hi, Jes:

  Yes, it would be the battery.  The relatively heavy bar that is normally removed retainers of slide.

  From what you described, I am afraid that your PC needs a lot of work (probably a bad motherboard), and you'd be much better to buy a new laptop or refurbished, than to pay a lot of money to fix yours.

  I guess you would have to pay more than $200 for repair.

  I'm sorry this is probably not what you wanted to hear.

  Best regards

  Paul

• 850 - 009na M1Z34EA #ABU: CPU fan for the 850-009na feel like Phoenix does not turn down after the power - on self test unless the BIOS is entered

  Hello

  I have posted responses to other posts on this topic, but thought I'd start a new thread to gather my conclusions. I'm sorry for a trial

  This PC is virtually brand new (only a few weeks now) and otherwise perform exceptionally.

  Basically, if the machine is disconnected from the power grid (i.e. the power is off at the plug or the power cord removed), when the machine is supplied then the CPU fan turns over 2000 rpm and stays there. All the other PC that I do this too, but the fan will slow down after turning upward. I know that this is done as part of the POST to check that the fan is running.

  If I go into any installation of seed, start-up or BIOS for example (i.e. by pressing ESC or F10 etc.), the fan will slow down immediately up to 700 rpm. It will stay like that until the next time the machine is started against the cold. If I shut down the PC - watch or stop - but do not cut the power supply, then the next time the machine is started, the fan is still about 700 rpm. It is not to turn up to 2 k + RPM when lit.

  As soon as I unplug, then the next time the PC boots, it will turn to the top and I have to repeat steps - off, boot, enter the BIOS, exit and continue. It is something to do with the cold start.

  Note that I don't have to do anything in the start menu - I for example go to the BIOS settings, exit without saving the changes, and the fan will still slow. It's going in the boot sector that slows down the fan.

  When the PC started out-of-the-box, I opted for the upgrade to Windows 10 during installation. I have read in various places that people had experienced after the upgrade, so I reset the machine to factory settings (Win 8.1) and have not upgraded, but the problem persisted. However convinces me that Windows 10 has been removed completely, as when I went to restore the backup image (i.e. dating back to what I had before the factory reset) there are references to 10 Windows (for example, it says 'Continue to Windows 10' as well as various food options). I do not understand UEFI so I don't know if that was involved.

  I tried to change the power plan options "Processor power management-> cooling system strategy" on the liabilities side, but no joy there.

  I think that the fan and sensors work, based on the findings below. These readings of temp and fan are taken from AIDA64

  After starting cold (current was cut, without entering the BIOS), machine runs dry without load

  

  Exactly the same thing--starting in cold, but go in the BIOS, do nothing and continue. Once again, no load

  

  This is after power off and resarting, but to let the PC network

  

  After the above, I used Prime95 to put the CPU support (use of 95-100%), and after an hour, the readings are:

  

  Note that even so, the fan was not particularly strong, but it's at 2222 rpm as in the first reading.

  If I play at 4K (the whole point of the PC ) the CPU so far got very warm, the GPU is but his fan turns up as planned.

  In conclusion, it seems that the POST has a problem because it does not slow down the fan after the test.

  I can live with let the machine always plugged into the sector (for example, most of the time) and I guess that's what most people do, but I would like to know what the problem is (for example if it's really something 10 Windows, or a bug in the BIOS/UEFI)

  Thank you very much!

  John

  Explain you a lot of people who maybe have returned their system immediately because of this? Others might judge normal sound. Not irritable average is not coming here to complain. Others might judge her so little. They simply don't like. You will never convince me that is not a BIOS problem. As the problem resolves itself when you enter manually each time. It can be reproduced every time.

• my button is not the top of my list of contacts - when I start typing a name, a list does not appear, for me to choose and my spell checker does not work

  my button is not the top of my list of contacts - when I start typing a name, a list does not appear, for me to choose and my spell checker does not work

  Hi Lynn,

  What mail client do you use?

  Using Windows Live Mail or Outlook?

  For Windows Live Mail:

  The best place to ask your question of Windows Live is inside Windows Live help forums. The experts he specialize in all things, Windows Live and I would be happy to help you with your questions! Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

  For Outlook:

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

  If you are not using one of the people then please let us know what you use so that we can help you further.