Windows does not start. Cycles to start in safe mode page, will then try to restart on its own

Similar Questions

• "Windows Vista Security Center" close browser windows, precise I have a virus, and now no programs will be opened. Windows does not start in safe mode, and all the system restore points have already disappeared.

  Hello

  I have a Dell laptop under Windows Vista Premium. I got it for about three years, and he is upset enough ok tonight. In the middle of browsing the internet, check my email, etc., all but one of my browser windows close at random, and a message appears "windows vista Security Center" whenever I try to open a new window, blocking of the site and to say that the site is dangerous and my system has been infiltrated by a Trojan horse. Then he starts the scan and says that I must buy the full to get everything to work again. I closed everything, since I already have McAfee antivirus and internet security, but it does not, and neither did any other progams. I tried restarting in safe mode to restore a backup point, but Windows does not open in safe mode, rather stick for half an hour in the middle of loading. When I managed to start windows in normal mode, I found that all my past restore points had been erased.

  This happened to someone else, and it is fixable without wiping everything?

  Thanks in advance,
  Emma

  Hi Emma,

  This could be due to a virus on your computer.  Try to make a virus on your computer scan to check if your computer is infected.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Help please the windows does not start in safe mode

  I have windows 7 and I got a simple error that I need to fix but I need to get into safe mode. I'm doing the tapping of f8, but it just goes to the login page. Ive tried several times and just can't get it

  Hello

  There are 2 methods to get into Safe Mode.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Windows7

  Use the msconfig method:

  Using the method of System Configuration tool:

  Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode without failure. For reasons that why you should read this.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig as shown in Figure 12 below.
     
     Figure 12. Windows 7 search box

     Then press enter on your keyboard.

  4. The System Configuration utility will open and you will see a screen similar to the one below.

     Click the Startup tab.

  5. You will now be the home screen as shown below.

     Put a checkmark in the checkbox Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     Click the restart button to restart your computer.

  8. Your computer will now restart directly in Mode without failure. When you get to the Windows 7 logon screen, log on to the computer and perform all the necessary tasks.
  9. When done with your tasks, starting in Safe Mode, start msconfig.
  10. When the program is opened and you are on the general tab, select the Normal startupoption.
  11. Press the apply button, then the OK button.

  See you soon.

• Windows xp does not start in safe mode how to

  Computer says windows did not start successfully and does not start in safe mode, will not restart, do not go back to the last known good configuration

  When you choose to start safe mode, which is the last thing you see on the screen?

  When you arrive at the menu of Boot Options Advanced F8, you need to choose in this menu, the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  You won't get past step 1 of KB307654 or install the Recovery Console or do a repair install without a real XP bootable installation CD that matches your currently installed Service Pack (very unlikely).

  You have a real installation CD bootable XP that corresponds to your currently installed Service Pack?

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Does not start in safe mode.

  Does not start in safe mode.  "System Tools" jumped to the top and I couldn't get our of it.  Shut down the system to turn everything off.  When I try to reboot in safe mode, I get to the scren that ask for your system press operating enter and get a black screen.  Help?

  Thanks for the help.  Hard drive died.

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.

• MacBook air does not start in safe mode

  Hello

  I have a MacBook air 2015 and my disk got full and now I can not connect with my user. The progress bar stuck at 100%, and the system won't let me connect. I have read that I need to start in safe mode but I can't do it. My MacBook does not sound at startup and even if I press the SHIFT key the system takes me to safe mode. The only thing I can do is to go into recovery mode.

  Can someone tell me please in the right direction.

  You can use target disk Mode to access the MBA:

  https://support.Apple.com/en-us/HT201462

  When you delete or copy files on the MBA, remember to empty the trash.  Then only the space is allocated for the new data.

  Ciao.

• Phone constantly optimize the applications and does not start in safe mode.

  Hello, I restarted my phone yesterday morning and it has been "Optimizing apps" since then, I have no access to a pc that I work away from home, I reset hard it loads of times and tried to start in safe mode by using low volume and power (it does not restart the phone the sony screen over and over) is here something I can do to get the z3 works again? Any help is appreciated!

  @Mav0095

  You will need a computer to use the CCP or bridge

  PC Companion (CCP)

  Bridge (for Mac)

  Xperia Companion (XC)

  Software repair Guide

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• Black screen, does not start in safe mode - how do I restart my mac

  Hello, I have a MacbookPro, that all of a sudden will not start. I believe that the problem - from what I've read-, is that memory is simply too fulll. I tried to start in Safe Mode, but of course it doen't work. The screen displays a small bar as it loads, but after a while goes back to the same blank screen and nothing happens. I tried waiting half an hour, but nothing changes. I have not tried to launch utility disk in Recovey Mode because I'm afraid of what will happen to my files. Unfortunately, I unwisely postponed to back up files and now I'm afraid to do anything that my fry them all without me even realizing it. Can you offer any solution that is as safe as possible?  I don't have a cable Thunderbolt.

  Thank you

  If you think that the MBP storage is full and not allowing you to start, try the target disk mode:

  https://support.Apple.com/en-us/HT201462

  Ciao.

• Windows does not start in normal mode after the Trend Micro update a few days ago. I can only work in safe mode. Whenever it freezes in normal mode just after typing my password. Help, please.

  Trend Micro update

  If the information below does not help, contact Trend Micro because it is their product that caused the problem:

  http://eSupport.trendmicro.com/default.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• My Windows XP does not start, including safe mode

  Hi, I have a computer dell laptop with windows XP Home Edition. Is not start even in safe mode. In safe mode, it crashes after loading file isapnp.sys driver display. In other modes, it displays a white screen. I tried to replace the file sys of the installation CD but no use. I have run the command chkdsk from the recovery console, but no use. I tried to repair the xp using the installation CD. He did copy the game files and restarted after copying. But no use and crashes at the same files isapnp.sys. No error is displayed. Please help me.

  ISAPNP.sys is normally the last pilot of the group "reserved to the system", then xp loads 'boot bus extender' group. Some viruses may have injected a pilot belonging to this group: If your antivirus caught it or something strange has happened, your xp should hang at this moment.

  You have to work offline (with a live cd such as ubcd4win or mounting your hard drive on a pc, not as one bootable of course), check if there is something strange in windows\system32\drivers, for example a .sys 0 KB long file with an unusual name, then find his name in the registry (it might have a weird registry entry too)

  Take care to do a backup (export to a reg file) before you delete these entries. In addition, this type of virus usually load something else, at least as autorun (e.g. under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run), so you have to check the registry for other suspicious entries in known locations (and/or do a scan with antivirus update offline)

  These are some advanced "s maneuver", so if you do not feel comfortable and do not understand the question better if you request technical support.

  Good luck
  Riccardo/Italy

• Windows XP code Stop 0x0000007B (0xF78AE524, 0xC000000E, 0x00000000, 0x00000000) the machine does not start in safe mode or give me a command prompt to run a chkdsk or virus scan, what should I do?

  I have Windows XP on another system.  When we started, we had a blue screen with the above error codes.  I tried to restart and boot into safe mode and safe mode with command prompt, but right after that I chose the option of start, blue screen error reappears with this code.  How can I get the machine to start so I can run a virus scan or restore?

  a google search showed this article http://support.microsoft.com/kb/324103

  You can try to boot in the recovery of a XP cd console.

• PC Windows 7 does not start in safe mode after current updates

  I have a HP pavilion dv8t-I7-windows edition laptop home premium.  After a few updates auto windows, my pc would no longer start - got 'configure the custom for windows update desktop setting.    I got the pc in safe mode and did a restore and pc worked fine.  However windows last night did automatic updates again, and this morning same problem was back.  However, this system time freezes everything trying to load all the drivers for safe mode - then now I can't do a restore.  I noticed when I saw that windows wanted to restart for the new updates that half of the updates were for windows 10 House - I don't even have 10 windows on my laptop.  Very frustrating that these 10 updates windows could be the cause of my pc becomes unusable.

  Any help would be appreciated.

  Hello

  My apologies for the late reply.

  I suggest you to fix your PC using a windows 7 installation media.

  1. Boot from the Windows 7 disc.
  2. Once you select your language, time settings and keyboard, click Next to load the next window, and then click repair your computer on the lower left corner of the window.
  3. You should then be presented with a screen to choose an Option , with Troubleshooting as an option to select.
  4. In Troubleshooting screen, select Advanced options.
  5. Select startup repair in the Advanced options screen, and then select the operating system to repair, target, which would be Windows 7 in this case.

  Kind regards

• Computer does not start in safe mode/get blue screen.

  I have a desktop dell Vistro 220 with vista on it. I stopped him Sunday morning and it took forever to stop, he remained on a blue screen saying closing down, so I turned it off using the power button on the tower. Now, when I try to start it I get the blue screen with a bunch of errors on it. I ran a few tests by going to the start menu and I get these error codes. I think he has a bad virus, but it won't let me start without failure, a repair or one of the other options in the start menu. I tried the normal startup too, and I get the blue screen. Is there a way to fix this or get my stuff out of the hard drive? I have pictures of my children on my hard drive that I've not saved, and I have important documents I was working on my work on here also. I did a few diagnostic tests of obtained through most of them with a pass, but when I got to one he stopped and I got these error codes: 0F00:065 D and 0F00:0232 MSG: DISK_0 - self-test read error and it goes no further. Please help me.

  Hello

  It would be preferable to do the above to remove malware and who could possibly allow the
  computer to start so it can be repaired.

  / Settings (BIOS/CMOS) often F2 as you start then look at screen - set the boot order to
  CD/DVD first and start with these to run audits of malware and the removals. Be sure to set the
  Start the command return when finished.

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus
  integrated programs-Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  System Rescue CD
  http://SysRescCd.org/Main_Page

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.