Windows does not start due to a lack or corrupt the file "\windows\system32\config\system.

Similar Questions

• Windows XP does not start due to a missing or damaged file.

  When I turn on my laptop, I get this message:

  Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  You can try to repair this file by starting Windows Setup using the original Setup CD.  Select 'r' in the first screen to start repair.

  I bought this computer and has not received any documentation or the drive with him.  How can I me things in the market again?  Or how can I get my files on the HARD disk without losing any data?  Nothing works without some sort of operating system, so I can't start a CD or go on the internet with it or anything else.  Someone suggested to remove the HARD disk and connecting it to another computer via a USB cable.  I tried that but didn't have any instructions very thoroughly how to do and not to do anything.  What can I do?

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Re: EQuium A100-147, does not boot, \windows\system32\config\system - lack-

  This laptop Equium A100-147started does not connect to the internet normally, but she in safe mode.

  So, after trying the virus scans-nothing.
  Restoration of the system-nothing. I decided to put in the recovery disc and reinstall windows media.
  I changed the boot sequence to install, boot sequence changed to original.

  He has reinstalled but won't get to the Windows screen, a message came \windows\system32\config\system-manquant or damaged.
  I can't see even a way to do a repair with this recovery disk?

  Any help would be appreciated

  Thank you in advance.

  This error means that the registry is damaged.

  The registry consists of the following files:

  c:\windows\system32\config\system
  c:\windows\system32\config\software
  c:\windows\system32\config\sam
  c:\windows\system32\config\security
  c:\windows\system32\config\default

  You can restore these registry files in the restore folder of the system hidden on the C: drive.

  Here are the instructions:
  http://support.Microsoft.com/kb/307545

• Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  Nice day

  I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

  When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

  Chkdsk /r

  (there is a space before the slash)

  Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

  Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002

• Unable to start my laptop due to c:\windows\system32\config\system

  Unable to start my laptop due to c:\windows\system32\config\system missing or damaged

  Hello

  ·        Remember to make changes to the system?

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Virtual machine does not start after restoring from Time Machine to the new Imac

  I got my IMac replaced by Apple, after that they could not fix the old one.  They did a full restore from a Time Machine backup.  The virtual machine does not open now.   When I navigate to the file to try to open the virtual machine at the VMware logo in the bottom right of the icon displayed with large yellow exclamation appears on the icon?  Anyone encountered this problem before.  I'll take the Imac in Saturday if I can not solve.  The machine has the same size as before.  There are a few aspects of sharing with the Mac application miss me?

  According to the MacVirt.vmdk folder, you have the right number of segments of shared disk so you should be able to create a new VM by pointing to the disc in the new VM Wizard by pointing to the MacVirt.vmdk file.

  Note: After you create the new Virtual Machine, I would not suggest the Virtual Machine to stop, pause and close merge and then move all *.vmdk files in the package of the virtual machine, and then manually change the computer configuration files virtual .vmx and change the path to a little to view the MacVirt.vmdk file.  In this way, everything is in one package and is easier to maintain.

• Problems starting Windows XP. I get "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM"message.

  Original title: start windows xp questions

  Windows xp. When I try to start the system I get the message "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM... I have an xp disk and code but not sure if it is the origanal. When I start the computer, it does not start the windows xp disc.

  If you get the message hal.dll missing, your system is still booting from the hard drive and do not boot from the XP Recovery Console CD (I hope that you have created).

  There is no hal.dll on the CD you made if all goes well.

  You must enter the BIOS of your system and make the first boot from the CD to your Pcakard device Bell looks like it firstly, instead to focus first on the HARD drive (make the drive the second choice for now).

  Searching the Internet, I found a message that says to enter the Packard Bell BIOS you must do this:

  Users of Packard Bell, you can access the BIOS set up by pressing the keys F1, F2 or del

  I don't have a PB, so I can't say for sure if that works, or what to do after that - you will need to look around the BIOS for things like the boot order boot priority, etc. and make the CD drive the first choice, second choice HARD drive, save the settings, then you can boot from the CD I hope that you have made using these instructions.

  Generally when the system detects a CD is inserted, it will sell you a message like this:

  Press any key to boot from CD...

  Then all the button and follow the rest of the instructions...

• Windows didn't start because the following file is missing/windows/system32/config/system Windows XP

  Original title: repair/restore of windows?, a little confused?

  My brother has problems with his computer. It happens that windows didn't start because the following file is missing/windows/system32/config/system. I need to know how to do this, but for some time.

  On the sites, some say not to use get it back? (is that right?) Here's what they say. He has not brought his xp disk, I tried an iso online but lacks the EULA. I have a windows xp update here somewhere, thatt allow me to fix his system?
  I basically have to hit enter then press R? Thank you

  1. Press Enter to start the configuration of Windows.

     do not choose "to repair an installation of Windows XP using the Recovery Console, press on R", (do not want to load the Recovery Console). I repeat, do not choose "to repair an installation of Windows XP using the Recovery Console, press on R.

  2. Accept the license agreement and Windows will search for existing installations of Windows.
  3. Select the XP installation you want to repair in the list, press Rto start the repair. If the repair is not one of the options, END of installation

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Please need help, my computer does not start. I get the following message:

  Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · You have the windows XP Setup disk?

  · What is the exact error message that you receive when the computer starts in return?

  You can follow the procedure from the following link: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

• Error: "Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM"

  Original title: windows xp, do not load until 08/06/11

  Windows xp2 would not start. I have windows xp on another hard drive but I am unable to see my media files, it shows only a few programs when I check the properties, it shows that 37% of the hard drive is used it is a 40gig drive, how do I get my wma filesand other files? problems on the main drive began when the current was until windows has been completely closed down.the hard drive is almost full ive been impossible to record data due a bad cd Writer.whilst in the recovery console a message came with \windows\system32\config\system missing I don't know where to find and replace this file on xp cd

  Thanks derek

  Hi Derek,.
   
  For the hard disk with the error message, try the steps mentioned in the article given below to resolve this issue:
  How do I recover from a corrupted registry that prevents Windows XP startup
  
  Warning Do not use the procedure that is described in this article if your computer has an OEM operating system. The hive system on OEM installations creates passwords and user accounts that did not exist previously. If you use the procedure that is described in this article, you may not be able to log in the recovery console to restore the original registry hives.
   
  For problems with media files, I suggest you to start a new thread and provide all the necessary information to help us help you better.

• Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  1. Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• Windows can't start because\windows\system32\config\system is missing

  original title; Windows cannot start because\windows\system32\config\system

  I did a system restore, and when he went to restart blue screen came to say windows didn't start because he would cause damage. Then I went to Advanced menu and it does not start even with safe mode. but it says that \windows\system32\config\system\ is missing... Help, please

  Hi jerijenks,

  · What is the number and the model of the computer?

  · The operating system comes preinstalled on the computer?

  · What is the service pack installed?

  · Why were you running system restore?

  See: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Windows didn't start because the following file is missing or corrupted \windows\system32\config\system

  Windows windows xp could not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can accept it corresponds to repair this file by starting windows setup using the original Setup CD
  Select 'r' in the first screen to start repair

  I don't have original cd so I downloaded from the internet.  Only 1 cd when the instructions said it would be 6. that didn't work

  tillieme,
  You will need a valid XP disc to run the repair.  It is possible that the PC manufacturer develop a recovery hard disk partition.  You should check with them to see if it's an option.  Also, some manufacturers will provide filtering alternative for a small fee. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error starting up - file is missing or damaged - windows\system32\config\system

  I rebooted the computer with the original system startup disk.  Choose the R option and waiting.  Wonder what windows installation I want to log on - 1 only possibility... C:\Windows.  When I choos this option, the computer runs for a few minutes and then watch C:\Windowa...what do I do now?

  http://support.Microsoft.com/kb/307545

  Personally, I just demarrer start from the XP CD, press R to repair, and in the console I type chkdsk/p

  http://www.computergeeksonline.NET/errors/Windows-System32-config-system-error.asp