Windows does not start normally after Windows Update

Similar Questions

• My Windows does not start normally. I can't get past the "Welcome".

  My computer or my windows does not start normally. I can't spend the 'welcome' after that I put my password!

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Method 3:

  How to resolve performance issues during startup in Windows Vista

  http://support.Microsoft.com/kb/950684

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

• Windows 7 does not start normally.

  Windows 7 does not start normally.  The Startup Repair tool will not fix the problem and restore the system to the restore point further did not help either.  I ran a Windows Memory Diagnostic, and he says that he has no problem.  I started the system in Mode safe, everything seems to work fine, but I can't seem to find something that will solve the problem and allow Windows 7 start in Normal Mode.

  In Safe Mode, try setting up Windows for "clean boot".

  http://support.Microsoft.com/kb/929135

  Follow step 1 to clean boot, and then see if you can start the computer in Normal Mode.

• XP does not start normally. Must use the F8-last known good configuration.

  For the last three days, XP does not start normally. I use F8 and you select last known good configuration that worked. It gets old. If I try to boot normally, it freezes on Autontfs not found I have a MSI wind Pc with Windows XP Service Pack 3.

  Hello Susanherna,

  The last known good configuration is created during the logon process. This means that something has changed between the time that connect us and time that shut down us the computer.

  At the next startup, select instead of last known good configuration safe mode.

  We want to then try a clean boot.

  The following articles describe this process on Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Let us know what are the results of this and we will continue from there.

  Best regards

  Matthew_Ha

• Windows 7 Enterprise does not start successfully after re - install

  I have just reinstalled Windows 7 Enterprise 32-bit with SP1 on my laptop HP 6715 b. (I use 32 bits for any software that I develop is always compatible 32-bit.)

  After you have re-installed however, it does not start correctly. What came with windows announce "Starting Windows", but the following animation never - start the four lights that turn and turn into the "Flying Windows Icon.  It then crashes right there - do nothing, no matter how long wait.

  If I can put the machine power off and re - start, we are at the "Windows Recovery screen" - because it has not started correctly the last time.  From there, I can choose to make a recovery and return to the last Point of good restoration, i.e. on a freshly installed system before the update of Windows, of course.

  If I select "Start Windows normally", it starts however. But it is not 'Normal '. For example I can't finish my "Windows Easy Transfer".  It says that it cannot connect to my domain name - even if I am connected to my area and have been using it to install other software.

  Or I can do a Windows Update "normally". The last time I tried, it is gone for hours without finding what be - so I left it overnight. In the morning he had apparently found nothing yet.  However when I turned off the machine and then turn it again - he told me there are 211 updates installed.  WHO has literally all day.

  I'm not happy to come back to the last good Restore Point.  I did once.  He has NOT fixed the problem.

  I also tried:

  • Using MSCONFIG to disable all the startup and Services, apart from Microsoft and Kaspersky - no improvement.
  • Do a CHKDSK - revealed nothing.
  • Start in Safe Mode, did change his behavior.  This time I do not have the Herald "Starting Windows".  But turn the machine works again once, return me the 'Windows Recovery screen '.

  Ideas anyone? I'm at my wits end.

  It's OK guys.  I have it sussed.

  He was objecting to the fact that I had my USB with my "Windows Easy Transfer" files on it, plugged during the initialization of the system.

  Also, I was wrong in my thinking on how "Windows Error Recovery".  I assumed that he would do all that it checks before proposing to do a system restore.  It is not, it suggests a restore of the system first.  If you say NO to that, then he makes his audit.

  What is finally here, is that I finally chose an option before he went into the system recovery.  Then, I waited until he was asked to do a system restore.  I said NO, so he went in it checks.  He went through his analysis and finally concluded it was some "system unspecified device" recently added.

  Well I haven't nothing added to my machine for years.  So, I was puzzled.  Then I thought ' well, I don't normally have my key USB is plugged. "  I wonder... ».  I therefore disconnected the USB drive and rebooted the machine.  The rest they say is history.

  Hope this sorry tale helps someone else.  It just cost me four days!

• Windows does not start more-IE 9 update failed

  After you have installed the Windows updates, I received 10/09/2014 my computer erased, and then wouldn't boot.

  After waiting for about 20 minutes, nothing is was so I used the button to turn off the computer. When I rebooted I gave me an option to use the Startup Repair tool, I did. It is yet to start, but then I was given an option to the startup repair using System Restore. I clicked 'Yes' to that, but it seemed to me that Startup Repair has just kept running and it ends by told me to click on 'continue' and if the Startup Repair has been able to repair my computer should start.

  It finally began. The first thing I did was to check the Windows updates and it shows 6 7 updates succeeded. However, Windows Update face page shows that I have 7 important to install updates.

  The update that is shown is failed is Internet Explorer 9 for Windows Vista, KB2977629.

  Then what should I do? History displays 6 of the 7 successful updates but Windows Update I still 7 updates to install. I'm a little afraid to go and install again since my computer does not start after the first try.

  As I said, I need help. My computer was working fine until I tried to install the updates.

  Very well.

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• Satellite L30-101 does not turn ON after Vista update

  OK well my laptop has played lately and I have installed the new update of Windows Vista.
  Now my laptop didn't boot.
  It just won't turn on. I tried everything and its not working everything simply do not.

  Whats gone wrong turned with her and is anyway I can fix it?

  Hello

  Do you mean the laptop does not illuminate or only the Vista operating system does not start?

  You see the home screen Toshiba appearing at the beginning?

  Feedback would be appreciated

• Equium A100-338 does not start the OS Vista - update Bios?

  Hi guys,.

  My laptop (a few months) decided to die and was told by tech support that it might be because of the BIOS. The problem is that the computer does not start the operating system (Vista) and the update of the BIOS available only is the version of windows. Are there any other mirror to get the traditional update or even a way to convert a the update the BIOS from Windows startup disk?

  Thank you

  Hello

  If you can see that one version of BIOS on Toshiba page then only one version exists and is available!

  > The problem is that the computer does not start the Vista operating system
  I don t think that BIOS could be responsible for this problem.

  You must first provide more info on this problem!
  The laptop goes to home Toshiba screen? Have you tried to recover the laptop with the Toshiba Recovery CD?

  Please provide details!

• PC does not start upward after being low consumption mode. seeing any food is yellow and nothing is on the monitor

  After being in mode low power for a few hours, the pc does not start upward.

  the led on is yellow instead of green and the monitor displays no signal. It is a dell 4700

  Windows xp home

  Obviously, it's a hardware problem. Unplug the computer from the power outlet. Press and hold the power button for 5 seconds. Let the computer unplugged for a few minutes then re-connect-the and try to turn it on.

• Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

  Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

  DEB

  @DWESTDEWITT,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

• Windows does not start until after the second day to have.

  I just got my laptop Toshiba yesterday with Windows 7 above. I used it for about 4 hours, when I'm done I turned it off by saying it close here go to start > stop. Before putting the laptop on I saw the lights on so I pressed the manual to close button, at the last second, I saw he said something as 341 on 356 updates installed, do not turn off the computer. I don't think a lot because I was tired so the next morning, I try to turn on my laptop and it stops after the Windows 7 load loading animation, and all I have is a black screen with a mouse. I tried to run in safe mode, same thing black screen with my ability to see where is my mouse.

  Contact Toshiba support under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP does not start normally. BIOS appears at startup

  Date & clock must be reset, Save and Exit (F10) does not record.  How can I get it to start normally?  Could it be caused by a virus... Use AVG Free... no sign of a virus.

  This is usually caused by a pile of dead motherboard.
  Find a battery on your motherboard and replace it.  Usually, this is a battery of size quarter drive.  If you do not, check the manual of your computer or download the manual of your manufacturer's Web site.

  HTH,
  JW