Windows does not when you try to copy files from a micro sd using a T-flash card

Similar Questions

• Windows Explorer crashes when you try to copy files (from dvd - rom on the hard drive)

  This is the error I get, copied from the technical details of UAC.

  I tried to create the new account and sfc/scannow
  sfc/scannow pointed out problems and errors, but is unable to repair.
  The Explorer.EXE version 6.1.7600.16450 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.

  Process ID: 98c

  Start time: 01ced605f3f95e5c

  Time of termination: 60000

  Application path: C:\Windows\Explorer.EXE

  Report ID:
  Is that the next step of repair window?
  Thanks in advance

  One of the recurring errors in Event Viewer was the 'Source' following 'KScsiPrt ':

  The description for event ID 9 source KScsiPrt is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  
  

  If the event is on another computer, the display information had to be saved with the event.

  
  

  The following information has been included in the event:

  
  

  \Device\Scsi\KScsiPrt1

  Which may indicate a problem with the SCSI KernSafe controller.

  Can you try disabling the controller SCSI KernSafe in Manager devices as suggested hereand see if that makes a difference.

  You may need to restart the computer after you disable the driver.

• Explore Windows 7 crashes when you try to copy files, pictures, etc.

  I have Windows 7 and since a few weeks ago, every time I try to copy files, documents, photos from one folder to another or photos from my SD card to my computer, or unzip compressed files, when I try to paste, explore Windows crashes and closes.

  Can someone help me please.

  Thank you.

  If you mean that you see something like this:

  

  If this is the case, read this:

  Maybe you have a distressed Explorer Shell Extension.

  Several recent systems of the incidents involving Acer and MyWinLocker of EgisTec (which is already known to include some suspicious Explorer shell extensions) that could come preinstalled on your system.

  Even if your system is not at Acer there installed MyWinLocker and since there were many reports indicate that it contributes to crashes explore it seems a good place to start looking.

  If you look in your installed programs and find MyWinLocker or whatever it is of EgisTec and you don't know what that is, or why it is there consider just uninstall, restart, and then see how things work.

  If you have determined that MyWinLocker or any other program EgisTec intervene follow GP below, so you will be able to see all Explorer shell extensions.

  If you see all the extensions of EgisTec, software security PSD, eDataSecurity, DragDropProtect (they will be some of pink extensions) start with these first.

  If none of these things exist, continue:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.  You can also see some errors of NAT (DEP, Data Execution Prevention).  DEP errors are reported when XP will be threatened by a program and Windows stops threatening program.  Windows should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.

  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly.  Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display, choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.

  Click on the header of column called Microsoft (it can be the way out of the right side of the screen) to sort the display (by clicking on the column heading in Microsoft) so all non Microsoft extensions are at the top and easy to see.  They will say 'No' and be marked in pink because they are not extensions Microsoft, something like this:

  

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  If you see extensions which do not have anything that is listed under Description, Version, product name, company or have special names that looks like they might be letters and numbers just randomly, you might want to look at these first.

  You can also Google the name of a suspect add-on and see if there is any success on the Explorer accidents or mistakes DEP and what other people have done about it.

  You can Google something like:

  Windows Explorer crash

  You must complete your suspect on behalf of adds on.

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition (right click).  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  A user reported that it was necessary to restart the browser after each adjustment to do that press Ctrl-E since in ShellExView.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.  You can always enable it later, so keep track of things by writing them down.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, then restart and test again to be sure.   You have disabled the last extension would be suspicious.

  You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.

  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list!

• "error when you try to copy files from music for the cd drive.

  CD or dvd

  tried to copy the music files for the disk. The disc said that DVD and the radio do not play it says: "cd error". Do I need to use a CD or I'm doing something else wrong? Thank you.

  Hello

  Check with the experts here
  http://Club.myce.com/

  Burned CD does not not in car CD player
  http://www.andybrain.com/archive/MB/burned_cd_in_car_player.htm

  Why the CD player in my car does not play the CD that I burn?
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0091.mspx#EKF

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Access denied when you try to copy files from CF Server ASP server

  I'm following the example of upload file in the CF help and it works fine. I can easily transfer a file to Server Web see only thing is, I need the file copied to another server. I tried < cffile action = "copy", but I get an access denied message. Here is the code I use. What should I change to be able to copy the file to the other ASP Web server on our network?
  
  < html >
  transfer the < head > < title > < / title > < / head >
  < body >
  Transfer the file < h2 > < / h2 >
  
  < cffile action = "upload".
  destination = "C:\Documents and Settings\ldtrip\".
  nameConflict = "overwrite".
  fileField = "Form.FiletoUpload" > "
  
  < cffile action = "copy" source = "C:\Documents and Settings\ldtrip\ #cffile. ClientFileName #. #cffile. "ClientFileExt #" destination = "\\iagweb\ribtrw\Files\" >
  
  
  < cfoutput >
  
  You have downloaded #cffile. ClientFileName #. #cffile. ClientFileExt #.
  #cffile successfully. ServerDirectory #.
  < / cfoutput >
  
  < / body >
  < / html >

  Just made a minor modification and ta - da. It works...

  destination = "\\iagweb\e$\ribtrw\Files\" >

• File modified icons and error when you try to copy files: 0 x 80070052

  ll of a sudden, I found my Word document files, pdf and other files differnet looking and I got this message eorro 0 x 80070052 when I tried to copy

  I tried to solve this problem, but I forgot:

  I have norton antivirus on my pc and windows vista, I suddenly found that all my files (documents, photos odfs... etc) all have a strange icon placed in the original top icon it looks like Media Player. I can open them on the pc, but I have treid to opencoy to my USB, he initially said no space and I deleted files. ND, then I tried to copy these fields to it, I got this error message:

  0 x 80070052

  and I think that it is aa problem with my antivirus it diesnt run correctly.

  pelase advise I can't afford lossing my documents.

  Thank you

  Hello

  Error 0 x 80070052 occurs usually when you try to copy files to an external storage device. You can format the drive to the FAT32 file system format and check if this solves the problem.

  Come to your icons of files problem, I suggest you perform a system restore to restore the computer to an earlier point in time before the problem occurred.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Windows Explorer crashes when you try to copy a file

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  This happens with any file or a particular file?

  Have you tried the copy command from a command prompt window (start > run > cmd > OK)?

  For the full syntax of the copy command, see http://technet.microsoft.com/en-us/library/bb490886.aspx

• In Windows 7 when you try to copy files to an external hard drive, getting the error "are you sure you want to copy this file without its properties?

  I know there have been a few posts on this in the past, but I have a slightly different query.

  To copy files from my drive NTFS of Windows 7 64 bit for my Western Digital My Book World Edition II 2 GB player manually, not with the WD software provided), for some files, the following message appears.
  "Are you sure you want to copy this file without its properties?  The X file has properties that cannot be copied to the new location. »
  After investigation, it appears that Western Digital My Book World Edition II is not NTFS format and is, in fact, driven Linux.
  Their technical support has confirmed that, despite the message, it is safe to copy files and rely on this backup (I want to backup my drive HARD whole so I can do a clean install - so it's really important!).
  Is anyone able to advise exactly what means the message in terms of properties lost?

  If you right-click on one of the files in Windows Explorer, then select Properties, you will see the Details tab of the properties he wouldn't if the files have been copied to a drive not NTFS. They are written in an Alternate Data Stream (ADS), and the FAT format readers include ADS.

  It depends on the file type of the importance of these properties. If you have spent a lot of time, adding titles and comments and authors and authors e-mail addresses to docprops your Word documents, for example, that the work would be lost.

  If you can live with the loss of these properties, go ahead - standard properties will be re-writings in the file when you restore from backup. It's of course time and resources.

  To avoid this problem, format your external drive to use the NTFS system.

  Noel

• Mail does not when you try to delete the message attach a file on new message

  I bought my wife a new MacBook, retina 12 "early 2015, 1.3 GHz Intel Core M, 8 GB 1600 MHz DDR3, running OS X El Capitan 10.11.3 with his old Mac, she would frequently get the ball from spinning to death when she tried to delete an e-mail message, and also when she creates a new message and tried to attach a file.  I was hoping that the new computer would solve this problem.  However, he still does sometimes, but not as often and does not have as much time to finally react.  Activity monitor says that the Mail does not respond when the small wheel is happening.  Looks like there is a corrupted somewhere file that got transferred to the new computer.  Any suggestions on how to solve it?  Previous posts suggested to remove the tray to sand, but the method, that said, does not have the folder that I had to remove.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• "Update of the server does not" when you try to update Acrobat 9 Pro

  I just installed Acrobat 9 Pro on my desktop and on my laptop. I was able to download and install the latest updates for the copy on my desktop computer (so that it is now version 9.3.0), use help > check updates.

  When I try the same command on my laptop, I get and error message "update server is unresponsive, which means that it may be offline at the moment, or the Internet settings or firlewall may be incorrect. Please try again later. "I tried several times yesterday and today with the same error. The message appears immediately; apparently not yet actually try to connect.

  I disabled my firewall and antivirus and always get the same result. I uninstalled then reinstalled Acrobat and still get the same result.

  I looked online on Adobe.com to see on the download and installation of updates manually, but it is difficult for me to say what updates, I need. Some are for other languages and some are 64-bit, but I have Windows 7 32 bit.

  A call to technical support was no help. The agent seemed to think because I installed the 9.0 version I needed only one English updated appearing on the page of download under 9.0, not updates later... And he said that Adobe recommends manually installation of updates of the site Adobe.com rather than use the control for the control of updates (?).

  In any case, anyone know what might cause this problem with the adobe update? Maybe I need to reinstall the update (where is it?).

  OR

  Can someone tell me who the updates listed on the page to dowload Acrobat should I install manually to bring my camera to date?

  [Running Windows 7 32-bit on both machines]

  Thank you.

  With all the respect that is due to the Bill, which is completely not the point of the question... you SHOULD be able to use the automatic update to easily update your Adobe products.  I have this talk frankly because I knew the incredible frustration of trying in vain to update my Adobe Creative Suite on my laptop.  I am assuming that you are trying to update Acrobat on a laptop and not on a desktop computer (not didn't have the same problems with my desktop PC).  The Merry is actually quite simple, just follow these steps:

  1. open the network and sharing Center
  2. click on change adapter settings
  3. right click on the map to Microsoft Virtual WiFi Miniport, and then click on disable.
  4. open Adobe Reader and help > check for updates

  And voila, updates to the Adobe Updater.  Enjoy!

• error 0 x 80070052 when you try to copy files to a USB

  Original title: error 0 x 80070052

  When you copy a file on a USB key, I get error 0 x 80070052 - failed to create the directory or file. Here's the odd part. When the file is named "114721_typ.jpg", I get the error. When he was appointed "114721_ty.jpg" I don't get the error. (Same file renamed.) When you rename the file is not an acceptable solution, because the files are installed by an installation program and must be used with the original names. If I copy the file and try to change the name to add the last letter that will fail. Good luck to find this one!

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that questions from the front during the copy of the files on the USB key. Please correct me that I misunderstood.

  I suggest you to follow the steps suggested by Fahimulla K and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-0x80070052-the-directory-or-file-cannot-be/a5f86b63-03a0-4B8A-92c7-2f3729ed35a1?msgId=09ddbecf-119c-4C02-93F4-1cc75696decd

  Try the steps mentioned in the link and come back if the problem persists while we can help you to repair.

• When you try to download files from my Shutterfly image I get the message that the files do not exist.

  I have check the files and all are jpeg files. What I've done wrong? I'm really tired.

  I use Windows XP and have not had this problem before March 2011, but now I do. Names of image files are short and contain no wacky characters.

  As an experience... try to copy photos to a new folder
  on your desktop... then navigate to this folder from Shutterfly
  and see if they will download.

• -Error message 0 x 80070141 when you try to copy pictures from the phone to the computer

  Hello

  I am trying to download pictures from my phone on my computer and I get the message:

  Error message - 0 x 80070141 the device is inaccessible.

  Can anyone help please

  Carolyn

  I also had this problem under Windows 8 & using iphone 5s; However, I finally found a way around fun people, but it works. If you copy and paste each item one at a time, it works. If you try to do more than one item, you get the error message.

• When you try to copy messages from Outlook Express to Live Mail, all of the .dbx except folders.dbx files copy OK. My new PC cannot read the disc to import messages (probably because that folders.dbx is missing?)

  I followed the contours of Ms. webesite steps to transfer my OE messages to my new LiveMail on my new PC. Instructions to mention to make sure that when you copy the message on a CD for transfer files to new PC that they must include the file "folders.dbx".  All my files message correctly copy except "folders.dbx".

  I guess that's why the new PC says there are no messages on the CD to be imported from (although I see that all of the .dbx files).

  Why is that I am having a problem copying "folders.dbx" and this is my problem in terms of imports?

  Create a new identity in OE and import the messages. This new storage location to transfer it to WLMail. It will be all new dbx files so no corruption should be gone.

• Error 80004005 When you try to copy photos from Droid 2 for PC

  I am trying to transfer photos from a Droid 2 to a computer and I get error 80004005.  I tried the Manager files, Backup Assistant, Photo Gallery, and they all give the same error message. How can I solve this copy my photos?

  Thank you!

  If your using Autoplay,

  Or if you don't, use the general options / open and display instead, with Windows Explorer

  Or, open wpg and use the import button.