Windows driver Modem UMTS 8.1: 3 presents problems in Device Manager

Since the update of Windows 8 Pro Win 8.1 Pro the driver for the modem-umts-do not work correctly.
In Device Manager, it is marked with the yellow exclamation point.

Where can I get a driver? In the download area, I still find that x 86 drivers for win8.1

You haven't posted any info on your model of laptop, but I assume that these drivers are not released, if you have not found on the page of the Toshiba driver.
But I think you should try the Win 8 driver since the 8.1 version isn t very different as the Win 8

Tags: Toshiba

Similar Questions

  • Wireless adapter is no longer present in the Device Manager

    Hello

    I have an Asus laptop 1015E (http://www.asus.com/us/Notebooks_Ultrabooks/1015E/#overview) running Windows 8.  I don't know when it happened, but the built-in wireless adapter is no longer present in the Device Manager.  I tried to use the Asus install app to reinstall the driver Asus Wireless Radio control, but it just says: it is already installed.  I also went to the site of asus via an ethernet connection and tried to download the latest drivers for wireless card, but installation cannot.  It seems as if the laptop detects most hardware, so I can't install driver software. Any ideas on how to proceed?
    Thank you

    Hi wolves.

    Do you receive an error message/code?

    When a device does not work, it's mostly because the driver has been corrupted.

    Here are some ways you can follow to resolve the problem:

    Method 1:

    Check out the link and follow the steps in the article:

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-in/Windows-8/fix-network-adapter-problems#

    Method 2:

    You will need to install the Chipset Drivers first and later network adapter drivers.

    Reference:

    http://www.ASUS.com/us/supportonly/Drivers_For_Win8/#support_Download_36

    Method 3:

    Check the BIOS of the laptop to check that there isn't an option to toggle the map.

    Note: You can contact the manufacturer of the computer, if you are not comfortable access or make changes in the BIOS.

    Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    In addition, contact the OEM of your system and see if they can replace the adapter or run a test to make sure that the adapter is working properly.

    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

  • Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

    Hello

    I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

    Can someone offer me some advice please.
    Thank you
    Trevor

    Hello

    I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
    I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

    You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
    After this procedure, you should test the device if it will work.

  • CD/DVD drive not working do not error code 41 in Device Manager

    Original title: code41

    I went to the Manager of devices-uninstalled cd & dvd, rebooted, devices are see the watch but always error code41. When I insert a music cd, the Unit looks like it is will start up, then stop? I also tried the Fix - it on the web site, still does not? Any ideas?

    Hello

    Method 1:

    Try the steps suggested in the given below link and check if this is useful.

    http://Windows.Microsoft.com/en-us/Windows-Vista/why-doesn

    See also:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Note: In the article below try the manual steps for the removal of the filters and check if that helps.

    Method 2:

    This problem may also occur if you install a non-Plug-and-Play device driver, but Windows cannot find the device. Here are some things you can try to solve this problem.

    If the Troubleshooting Wizard does not resolve the problem, do one of the following:

    ·        If the device was removed, uninstall the driver, connect the device, and then clickScan for the hardware changes to reinstall the driver.

    ·        If the material was not removed, the driver files may be obsolete. In this case, update the driver in Device Manager. In the device properties dialog box, click theDriver tab and then click on update driver to start the theHardware Update Wizard. Follow the instructions to update the driver.

    ·        If the device is a non-Plug-and-Play device, you may need to install a newer version of the driver. To install non-Plug-and-Play devices, use Add Hardware Wizard. Click Start, and then clickRun. In the Open box, type hdwwiz.cpl.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 does not recognize the SD card in the Device Manager

    That pretty much sums up it. I can't understand. my SD card is not launched in 'my computer', but my device manager recognizes it, and little noise "da dup" turns on when I put the SD card in and out. Please help me, I have pictures of my studies that I need it. Anyone else having the same problem? the same answer? Thank you!

    * original title - Windows 7 not recognizing my SD card, even if my computer sees it in Device Manager. How can I get my computer to show my SDCard under 'My Computer'? *

    I had the same problem today. I have, but I fixed it by removing and then reinstalling the driver for the USB 2.0 card reader. He said that the data has been corrupted. so I reinstalled it.

  • HP Pavilion dv4130us - requires the video controller driver to clear the problem of Device Manager

    Any help would be appreciated. Have owned the laptop since birth. Update memory & HDD for patches of bloatware to Uncle Bill. Naoual need a video driver to resolve the problem of video hardware acceleration. I tried HP detects online etc, no video is available, would use the XP version, but HP will not install it because it is an unsupported operating system?

    Hello:

    I'm not quite clear what operating system you are running.

    If you are using XP, you then this video driver:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=447371&prodNameId=447348&swEnvOID=1093&swLang=8&mode=2&taskId=135&swItem=ob-52779-1

    If you're running Vista, then you need this one.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=447371&prodNameId=447348&swEnvOID=2096&swLang=8&mode=2&taskId=135&swItem=ob-47264-1

    If you are running windows 7, run the Vista driver above. It will error out (give an unsupported OS message, I believe).  Close the error window.

    Now, go into your device manager. Click on standard vga controller. Click on the driver tab, click on set to update driver. Select the browse my computer for the software method and navigate to C:\SWSetup\sp34749. Make sure that the include subfolders is selected, and the driver should install.

    Graphics card in your PC isn't completely Vista or W7 capable. You should now have hardware acceleration and be able to change your maximum permitted by your LCD screen resolution, but you won't have Aero.

    Paul

  • DVD rw drive no longer works, but he said fine in Device Manager

    my dvd player has been disabled, my Device Manager shows that it isn't. What must I do to make it work?

    Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • Windows XP Pro SP3 does not include 1 TB WD internal SATA drive Green even if it is marked in the Device Manager doesn't work properly

    Using motherboard Asus P5N - D, the Sata drive is displayed in the bios.  I use a Maxtor IDE drive as primary and I just wanted to add more disk space.

    Hello

    Try to connect the external hard drive on another computer and check if the same problem persists.

    I suggest that you set the drive letter for the external hard drive and check if that helps.

    To assign a drive letter to a drive, a partition, or a volume, follow these steps:

    1. Sign in as an administrator or as a member of the Administrators group.
    2. Click Start, click Control Panel, and then click performance and Maintenance.

      Note If you do not see the performance and Maintenance, go to step 3. Performance and Maintenance appears in control Panel only if you use category view. If you are using the classic view, performance and Maintenance does not appear.

    3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
    4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
    5. Click on Add.
    6. Click assign the following drive letter if it is not already selected, and then accept the default drive letter or click the drive letter that you want to use.
    7. Click OK.

    For more information:

    How to change drive letter assignments in Windows XP

    http://support.Microsoft.com/kb/307844

  • Teredo tunneling pseudo interface is no longer present in the Device Manager

    I am running Windows 7 64 bit and I noticed an exclimation point via the Teredo Interface of Pseudo Tunnling.  I uninstalled to reinstall the drivers and it never reappeared in my tree of devices.  How can I recover this unit and install the correct drivers?

    You use a router that is much easier, or you try to create an Ad - hoc network?

    Two of them at this link - if all of the computers on your home network are running Windows 7, create
    a homegroup - if your network contains computers running different versions of Windows, put all the
    computers in the same workgroup
    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    Set up a computer-to-computer (ad hoc) network
    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

    Set up a wireless network without router
    http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx

    -------------------------------

    References to Vista also apply to Windows 7

    Setting up a network home
    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

    Home network, wireless network and computer networking Made Easy
    http://www.home-network-help.com/

    Windows Vista tip: How to install and connect to a wireless network
    http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

    Networking tutorial home
    http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
    Practically networked - everything you could possibly want to know.
    http://www.practicallynetworked.com/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Cannot find driver modem XP on downloadsite for Tecra A8

    Recently, I have a Tecra A8. Makes difficult to Vista I uninstalled Vista and installed Windows XP service pack 2.
    I could download and install all driver XP toshiba except modem files successfully.

    Today my system displays modem and a PCI device driver that is not installed. Please advise me on this issue.

    RGDS

    ROVER

    First of all, you need to ensure your Tecra A8 series.
    European driver Toshiba page provides drivers 2 different sets of Tecra;
    PTA83 and PTA82. Choose the right.

    Download the modem driver, and then try to install it from the Device Manager!

    It should work

  • External hard drive in the Device Manager but not in disk management

    So I have this external hard drive Western Digital 1 TB. I've had for over a year now and it was working fine. I would like to trade my XBox 360 and the computerregularly. Then one day I brought home, plugged into the computer and nothing. My friend and I couldn't understand anything. We have gone as far as removing the hard drive and put it directly into the computer. I have reviewed, that he has lost.

    Then yesterday, on a whim, I tried to connect it again to the USB port. It is presented in the Device Manager but says that its drivers have not been installed. Then, I changed the USB ports on the back of the computer and as if by magic, that this is once again. I had full access. Stupid (and you can see where this is going) did not immediately transfer anything off the hard drive. I'm looking for an image and listen to a song off of said hard drive when the drive went suddenly not recognized.

    I can see now the reader in the Manager of devices under disk drives, and USB devices. However it does not appear in the disk management window. And Yes, I checked as well the Productdocumentation upper and lower, that it is not listed. Go to the area where you assign drive letters not shown not be. Normally this is E:.

    I also tried to remove the UpperFilters registry in regedit. It was not to remove LowerFilters. Obviously, that didn't work or the other.

    I tried several cords and all my USB ports with no luck either.

    I went on the WD Web site, but they do not offer anything other than a partitioner that I would save rather than as a last resort as there are a number of things on the hard drive I want to save.

    So it's not like it's a new HD to be partitioned or an old man who comes out crapped. I know there's the data I just need to get home long enough to get what I need. Maybe I missed my window, but maybe I did not. Maybe someone can help. I'm at the end of my mind on this thing.

    Sounds like a problem of partition (maybe corrupted partition tables) if the device is recognized, but not the 'disk '.

    There are recovery/repair partition about tools.  Western Digital actually have some but I think that they are made for internal drives.

    If I were you, I start with WD and start looking for partition recovery/repair tools.  If this is the problem then it is the right kind of problem and you using the right type of solution can fix it easily.

    If this is not the case, some data recovery tools can help you recover some files even if you have to recreate a new partition, although I wish you much luck with this approach!

    Good luck whatever you try and make sure that you do not overwrite the what partition information, you have without making backups (many partition edititing software will offer backups)

  • Second Hard Drive not recognized / climb (but it IS listed in the Device Manager)

    I have a HP Compaq DC7800 convertible mini tower running than Win 7 Pro 64-bit

    I installed a second hard drive, and while I can see listed in the Device Manager, it is not mounted.

    That is to say, it is not in the computer > field at all.

    The second hard drive is a Hitachi HDT721032SLA360 ATA Device

    Under the hardware ID, it is said: IDE\DiskHitachi_HDT721032SLA360___ST2OA38E

    I thought it was a driver problem. Device Manager indicates that it uses the Microsoft 6.1.7600.16385 driver.

    I can't find a Hitachi driver for this player. My understanding was that this drive would NOT need drivers.

    I have it in the plug of P5 (I think it is P5, it's at the end of the cable with the primary hard drive) and I have a data cable sata from the sata port on the rear of the disc in the slot sata on the motherboard next to the slot in the place where the main in drive is plugged.

    The only sites that list the drivers for this drive are all spam (thanks, google) sites.

    What I have to change something in my Bios?

    Thanks in advance.

    If the drive is listed in the device but not 'computer' Manager, it must be mounted or a new volume must be created. Please see HP - partitioning and names of hard drives (Windows 7) for more information on using the Windows Disk Management Console.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • HP 2000: Synaptics Touchpad driver trouble (installed but does not appear in Device Manager)

    I had a problem with my touchpad for months. The synaptics touchpad driver is installed but the touchpad does not work and does not appear in either (just my external mouse) Device Manager. . I tried various troubleshooting methods, but none worked. Any help would be a lot for me. Thanks (in advance).

    PROGRAMS AND FEATURES

    DEVICE MANAGER

    Hi @decyferme,

    Welcome to the HP Forums!

    It's a great place to find answers and suggestions!

    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

    Learn how to post and more

    How can I find my model number or product number?

    I understand that you had a problem with the touchpad for months because it is not responding. Although the driver is listed in programs and features in the Device Manager is not listed.

    Have you checked for virus and malware?

    Have you done all Windows updates?

    Have you tried to run the troubleshooter in Windows?

    Did you run HP Support Assistant to facilitate updates of HP?

    First you would try this step.  Some models, you can enable or disable the touchpad by double clicking on the top left corner of the touch pad.  Please see if it is applicable for you.

    Then in Device Manager, view hidden devices and search the hardware changes see if the touchpad now will be seen.

    Here is a link to the HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8) that should help you too.

    To say thank you for the reply, please click on the thumbs upwards the button below.

    If this gave a solution for you, please choose the solution provided to help others to find.

    Good luck!

  • No CD/DVD drive detected in Device Manager

    I have a hp pavilion dv9925nr portable laptop, running windows vista Home premium, service Pack2.  cd/dvd driver is missing, its not even appears in the Device Manager to all, I tried to scan for it and no luck.   I know it works, I tried the fix it install and I've been in the registry and remove filters superiors, he showed no low filters.  I even put the computer back to factory settings and the dvd player worked fine.  the only thing that worked for a while was to uninstall the game fast and install the latest version and it was working fine but now after a few updates his party once again and now reinstall quick play does not work either.  Any ideas would be greatly appreciated.

    Hello
     
    Do you remember the updates that caused the problem?
     
    You can check for them in the update history.
     
    a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
    (b) in the left pane, click view update history.
    c. to display more information about an update, double-click it.
     
    Check if it is detected in the BIOS.
     
    Warning of the BIOS:

    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
     
    In the meantime, I suggest that you follow the steps below and check if the problem is resolved.
     
    Step 1:
     
    Do the System Restore point that your CD/DVD drive was working normally.
     
    Step 2:
     
    Now, when installing updates, install one by one to determine which update is causing the problem to occur.
     
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Device Manager is blank in Windows XP.

    Original title: Recovery of the Device Manager.    Activation of plug-and-play and change registry permissions and allowances. Everything seems to be in order. But Device Manager is still empty.  Concerning

    Please help me if you can. I've been struggling with this problem for 10 days now. I use Windows XP every thing seems to work apart from the Device Manager. I thought at first that I had a problem with the CD/DVD units and eventually the mouse and wireless keyboard, but I then discovered that the Device Manager is empty. I tried to retrieve it using what I thought be set appropriate windows solutions. I also have triedthe solutions suggested by the members in the history of office help. IE: method 1. The Plug-and-Play Service and method 2; Check the permissions change and register. No change, the Device Manager is always empty. I also tried to use the recovery system, but who will return only 5 days. I can't reload Windows like the DVD player does not have the disc. Thanking you in anticipation. Concerning

    Hi Ronald,.

    Thanks for choosing Microsoft Community!

    You have reached the right forum. Let us work as a team and try to solve this problem.

    If I understand correctly, the Device Manager is empty in Windows XP.

    Try the following article:

    Device Manager may not show that all devices and network connections may not display network connections after installing Windows XP Service Pack 3 (SP3):

    http://support.Microsoft.com/kb/953979

    You can also check:

    Device Manager and network connections may be blank after you install Windows XP Service Pack 3:

    http://support.Microsoft.com/kb/953791

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756/

    Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

Maybe you are looking for

  • The secondary drive no longer appears after recovery

    I went recently to have 10 installed windows to do a full factory restore in Windows 8.1.  Fortunately with Alien Respawn the effective recovery was not too bad, but when I restarted I lost contact with my storage drive.  Thinking that I can get mad

  • SENDING LARGE ATTACHMENTS

    Shortly after the restoration of my system after a crash, Windows Mail has begun to penetrate the accessories separate emails that can not be opened. Example-one e-mail with a 5.24 MB attachment is sent as 69 separate email. A I click something when

  • RADIUS Server - Windows server 2008

    Hello world We use the windows 2008 standard server to our domain controller. We have been in for the last two years radius server in our campus. I could see that we can configure the client only 50 radius in NPS. Is it possible to add a plus in wind

  • Can blackBerry smartphones someone EXPLAIN PLEASE (9700 DEVICE)

    IF YOU SEE AN ICON COMES BESIDES 3G ON THE RIGHT HAND TOP CORNER THERE ARE 4 POINTS THEY KEEP APPEARING SOMETIMES AND THEN DISAPPEAR WHAT THIS MEANS AND WHY SUCH BEHAVIOR. ? EXPLANANTION VERY APPRECIATED BY THE COMMUNITY

  • First 10.3 (2015.3) import begins encoder

    Does anyone else have this problem?  Does anyone have a solution?  When I import files in first (generally video files), these files are added to a queue in the encoder and encoding starts automatically.  There is no file look in encoding, and no set