Windows DVDMaker did not audio product!

Similar Questions

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows mail did not start because MSOR. DLL could not be initialized

  After a number of updates have been installed, by computer could not restart automatically. When he did re - start, windows mail: could not be started.initialize junk filtering. Your computer may be in memory or the disk is full (0 x 80070002).

  When I press OK, I get: windows mail did not start because MSOR. DLL could not be initialized

  Hello

  What is MSOR. DLL or file MSOE. DLL?

  Perform the steps mentioned below and see if the problem resolves.
  a: Close Windows Mail.
  b: click on Start -run - type regedit and click OK
  c: Navigate to this key
  HKEY_CURRENT_USER-Software-Microsoft-Windows Mail
  d: right-click on that key / export / save under / where you want (with a. Reg)

  e: return this button again.
  f: Position yourself above and then do a right click and delete
  g: Close the registry editor
  h: restart the computer

  Registry warning.
  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope that helps

• Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

  Original title: need help URGENT

  The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

  'Launch Startup Repair' or 'Start Windows normally' did not work.

  What to do next without deleting my data? Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Data recovery, if required

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• my CD dvd drive Windows Update did not recognize the discs. Keep telling me to insert disc.

  My CD-DVD drive did not recognize my discs.    I have a desktop Dell 400.  XP OPERATING SYSTEM

  Hi DanJones-009,

  ·         What is the exact error message?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• I keep getting the following error messages: _ * Windows Installer did not install correctly__ * class not Registered__ * debugging Microsoft Machine.

  I'm not able to download anything. I tried to download updates to the installer does not work.  Tried to restore to the last backup, he did not part. I can also connect to the wifi.

  Hello
  
  1. what browser do you use?
  2. you did it any hardware/software changes to your computer before this problem?
  3. that you get this error message during the download? And also what is the exact error message?
  4. what exactly happens when you try to connect to the WI - FI?
   
  Please answer these questions and tell us more about the issue.
  You try to run the clean boot on your computer and check.
    
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
  The problems of Internet connection
  In Windows network connection issues

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows activation / status: not available - product ID: not available.. slui.exe error 0 x 80070424

  When you run slui.exe I get error code 0 x 80070424 - Activation of Windows / status: not available - product ID: not available... laptop comes with Windows 7 Pro pre-ionstalled... any help?

  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070424' to display the error text. "

  Error: 0 x 80070424
  looks like a problem of registry cleaner. See this response from Christmas D Paton:
  http://social.Microsoft.com/forums/is/genuinewindows7/thread/bbfb4c87-89BD-4f71-8292-959cb27524d4

• Windows backup did not complete successfully.

  My backups attempts continue to fail with "Windows backup has not completely managed" and when I click on the 'Options' button, it gives me the details of why and wrote "the disk where your backups are saved doesn't have enough free space.

  That is TOTALLY INCORRECT (it is a 1 TB 1000 GB hard drive) and my Windows 7 disc has only about 500 GB on it).

  I have Windows 7 Ultimate 64 bit installed (a clean install, not upgrade). I'm looking to back up from my boot drive (it's a multiboot machine, this time Vista Ultimate 64 on drive C: and Windows 7 Ultimate 64 bit on drive E :).) I have three other drives in this workstation HP xw 8200, two of them are used for backups, that is, "backups (Vista) (d)" and "backups (Windows 7) (f). All discs are 1 TB disks.

  Okay, I realize NOW, the problem is that in Windows 7, when I use the default settings for backup, the utility is trying to establish an Image of TIMES my disk of Vista (c) system and the Windows disk (E :), which of course well exceeds the space that I have on my unique physical backup disk.) I realized this after I chose the option to just an image of the system and it shows the selected physical disks (C: and E :) with NO WAY to deselect the C: Vista drive even if I booted from a disk system/physical separate (Windows 7). This seems to be a very poor interface or inconsistent WRT backup under Windows 7. Vista Ultimate UI for backup did NOT have this behavior (i.e., it ONLY allows me to make an image of the C: drive system, for example, my Vista drive when I boot on Vista).

• my windows 8 did not create a recovery point

  After a 10 hour by my provider, my windows recovery 8 did not create a recovery point for each program or windows update. At present, the protection system is activated, I manually set a daily restore point. Task Scheduler is empty. Can anyone help? I dare not to update the bios or drivers. Thank you

  Try to turn system protection off and turn it back on.  It should create all the necessary tasks and enable services.

  You can also create a script file and it runs on an interval you choose.  Here's the script (thanks to Member of the Forest Brook community for posting this script for us):

  Paste the following code in Notepad.  Save it with a .vbs (not .txt) file and double-click on it (or the calendar) to create a restore point.

  '------------------------------------------------------
  «Create an instant system restore in Windows 7»
  '------------------------------------------------------
  If WScript.Arguments.Count = 0 Then
  Set oShell = CreateObject
  "oShell.ShellExecute"wscript.exe"," ' "_
  & WScript.ScriptFullName & "" "Run", "runas", 1
  On the other
  Set oWshShell = WScript.CreateObject ("WScript.Shell")
  oWshShell.Popup 'create a point of SystemRestore. Please wait. », _
  2, 'System restore', 0
  swinmgmts = "winmgmts:\\.\root\default:Systemrestore".
  GetObject (swinmgmts). CreateRestorePoint _
  "Manual Restore Point", 0, 100
  MsgBox "Created System Restore Point", 0, "System Restore".
  End If

• Windows startup error: Windows NT did not quite long memory

  WHEN I START MY SYSTEM FOLLOWING MESSAGE APPEARS:

  • "WINDOWS NT HAS NOT RECOVERED MEMORY FAIRLY EXTENSIVE." 7 MB OF MEMORY SPAN IS REQUIRED TO RUN WINDOWS NT., YOU NEED TO MAYBE UPGRADE YOUR COMPUTER OR RUN A PROGRAM OF CONFIGURATION PROVIDED BY THE MANUFACTURER. »
  • Memory card:
    00000000 - 000 A 0000
    00100000 - 00110000

  WHY THIS MESSAGE IS DISPLAYS?
  PLEASE TELL ME.
  ME.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Also check the BIOS memory settings.

  J W Stuart: http://www.pagestart.com

• Windows activation / status: not available - product ID: not available...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc0000022
  Windows product key: *-* - TQGX8 - C8B9B-BGXFF
  The Windows Product Key hash: zwm29, 2Er, jco, UzoZnol3s8ds4 =
  Windows product ID: 00426-065-1031097-86198
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {8C3B3CF2-9D46-427C-BF00-7E494EA7772B} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {8C3B3CF2-9D46-427C-BF00-7E494EA7772B}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-BGXFF00426-065-1031097-861985S-1-5-21-1963371649-2677897436-3103612746Dell Inc.. Inspiron 5520 Dell Inc.. A14 20130513000000.000000 + 00065D43C07018400FE04090409Time(GMT-08:00) Standard Pacific03DELL CL09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
  Error: 0x80070426

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0 x 0001000000000000
  Event timestamp: 7:8:2014 03:32
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered Service: sppsvc

  --> HWID data
  Current Hash HWID: OgAAAAIAAgABAAMAAAABAAAABQABAAEAHKLEoNT5dxaUbBwvqFEw8a4pznA + V8zqeBWSQ/awEuOWYw is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  CL09 DELL APIC
  CL09 DELL FACP
  DBGP DELL CL09
  HPET DELL CL09
  STARTING DELL CL09
  CL09 MCFG DELL
  CL09 DELL SLIC
  CL09 DELL UEFI
  ASF! REFERENCE DELL CL09
  CL09 DELL SLIC
  SSDT CRV COMPAL ORB
  ASPT DELL CL09
  FPDT DELL CL09
  SSDT CRV COMPAL ORB
  SSDT CRV COMPAL ORB

  All seems normal - except for the last command, where it seems to have been no output (we usually expect an error 'Cannot find' similar to the one above)

  This makes me wonder if there is something...

  However, before we address that, please try this...

  This can result from the setting by mistake the folder Windows and its contents to "read only".
  status.

  Open Windows Explorer (computer)

  Navigate to the folder C:\

  Find the Windows folder and right click on it

  Select Properties

  Clear the "blob" in box "read-only (applies only to files in the folder)" by clicking on it until it is white.

  Click on apply.

  Make sure the radio button for "Apply changes to this folder, subfolders and files" is defined, and then click OK.

  Accept the administrator command prompt. After a few seconds, you will be told there is an error - click on the button "ignore all".

  Wait for it to finish - it might take a few minutes.

  Once completed, the "blob" will reappear. This is normal, and you can ignore it

  Out OK and exit Windows Explorer.

  Reboot twice

  Post a new report MGADiag.

• Windows Update did not find updates more. The progress of the download stays on 0%...

  I guess that it is a result of http://support.microsoft.com/?kbid=947821.

  I will go back to a system save point and will try to exclude the update above.

  So far I have no idea on the reason of detail.

  Encluded are some of the last line of the windowsupdate.log.

  I hope this helps to find a solution for this error.

  Thank you.

  Maritin.

  2010-10-06 23:11:43:998 944 84 c Agent *.
  2010-10-06 23:11:43:998 944 84 c Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-10-06 23:11:43:998 944 84 c Agent *.
  2010-10-06 23:11:43:998 944 84 c Agent * Online = No; Ignore download priority = No
  2010-10-06 23:11:43:998 944 84 c Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2010-10-06 23:11:43:998 944 84 c Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} third service
  2010-10-06 23:11:43:998 944 84 c Agent * scope of search = {Machine}
  2010-10-06 23:11:45:682 944 84 c driver matched device MONITOR\ACRAD46 driver
  2010-10-06 23:11:45:682 944 84 c driver status: 0x180600a, ProblemNumber: 00000000
  2010-10-06 23:11:45:682 944 84 c driver matched PCI\VEN_10DE & DEV_03D0 & SUBSYS_75971462 & REV_A2 device driver
  2010-10-06 23:11:45:682 944 84 c driver status: 0x180200a, ProblemNumber: 00000000
  2010-10-06 23:12:15:728 944 84 Agent WARNING: is not Installed, updateId = {39B46F0A-7244-48A6-B795-119AC74009F9} rule.102, hr = 80080005
  2010-10-06 23:13:45:834 944 84 Agent WARNING: is not Installable rule, updateId = {39B46F0A-7244-48A6-B795-119AC74009F9}.102, hr = 80080005
  2010-10-06 23:15:15:941 944 84 Agent WARNING: has no rule Installed, updateId = {28CD3E13-4657-4366-8C54-4B5BF58B0364}.101, hr = 80080005
  2010-10-06 23:15:45:971 944 84 Agent WARNING: is not Installable rule, updateId = {28CD3E13-4657-4366-8C54-4B5BF58B0364}.101, hr = 80080005
  2010-10-06 23:16:46:031 944 84 Agent WARNING: has no rule Installed, updateId = {7E95D1B1-EF28-46BD-9916-92D002A1A8E4}.100, hr = 80080005
  2010-10-06 23:17:46:169 944 84 Agent WARNING: has no rule Installed, updateId = {6FD7678D-D8B5-4443-BA8C-9DF5C9C342D4}.100, hr = 80080005
  2010-10-06 23:18:16:199 944 84 Agent WARNING: is not Installable rule, updateId = {6FD7678D-D8B5-4443-BA8C-9DF5C9C342D4}.100, hr = 80080005
  2010-10-06 23:19:16:259 944 84 Agent WARNING: has no rule Installed, updateId = {59226770-8072-4F44-8153-9E01D40D549F}.100, hr = 80080005
  2010-10-06 23:19:46:289 944 84 Agent WARNING: is not Installable rule, updateId = {59226770-8072-4F44-8153-9E01D40D549F}.100, hr = 80080005
  2010-10-06 23:20:46:350 944 84 Agent WARNING: has no rule Installed, updateId = {C5413C40-6EE8-475E-8A34-2AD72B208926}.100, hr = 80080005
  2010-10-06 23:21:16:380 944 84 Agent WARNING: is not Installable rule, updateId = {C5413C40-6EE8-475E-8A34-2AD72B208926}.100, hr = 80080005
  2010-10-06 23:22:16:455 944 84 Agent WARNING: has no rule Installed, updateId = {78CB53CC-FA47-48A7-A080-B5CE1F5B0C1E}.101, hr = 80080005
  2010-10-06 23:22:46:485 944 84 Agent WARNING: is not Installable rule, updateId = {78CB53CC-FA47-48A7-A080-B5CE1F5B0C1E}.101, hr = 80080005

  Hi MartinSanger,

  You can download and install KB947821 system preparation tool and let us know the result.

  If the previous step fails then that run the Windows update Troubleshooting If you use Windows 7

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If you use Windows vista, and then run the Microsoft fixit tool that is available in the following Microsoft article to reset Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why service pack 2 for windows vista did not install, while my system is certified authentic?

  Windows vista service pack 2
  the first Windows update install successfully, when restarting, install step 3, then
  a message appears, the service pack has not been installed

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366 TaurArian [MVP] 2005-2010 - Update Services

• My hp touchsmart computer windows vista did not build in the score, how do I perform a factory reset?

  I tried to do a restore to factory on my computer but the frame in the score which is supposed to be there is not there at all so it didn't work. She asks a disk but when I bought my computer I never received one, is there anyway you can help me? Thanks for your time.

  Read more about my first answer for you.

  They are your remaining options to reinstall.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can also contact HP and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista."

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  «How to activate Vista normally and by phone Activation»

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Why windows backup did not restore all my files?

  He was set to back up all the files (documents, music, photos, etc.), but I restored my latest backup of the system and it seems to have restored some valuable files that I thought it was supposed to be back up.

  Somewhat confusingly, I have a folder containing many shortcuts to some of the files that are apparently not here, but can open the destination via the shortcut folder although it don't or unable to display the folder in Windows Explorer.

  Any help to work out what is going on would be greatly appreciated!
  Matt.

  Display the hidden files and folders. If no go, sfc scan. They should bail out you.