Windows error recovery, "load failed with error 1009 (STHIVE #0).

Similar Questions

• Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) update - fail with the error 800b0100 Code

  Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R

  Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.

  Hi Alan,

  Thank you for visiting Microsoft Community.

  To resolve the problem with the installation of the updates, follow these methods:

  Method 1:

  See the article and check if that helps:

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest that you follow the steps described in the article and try to reset Windows Update components:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• The database recovery/restore failed with unexpected error 509

  Hello

  The database recovery/restore failed with unexpected error 509

  In the Event Viewer, I had this error SEVERAL times every second.  He goes absolutely crazy.

  I don't know what to do with it.

  I'm with Windows 8 Pro running on a very stable computer with 8gig of ram, plenty of hard drive space.  Each single drivers updated Windows Update.  Everything is really clean except this error in Event Viewer

  Svchost SRUJet (1624): database recovery/restore failed with unexpected-509 error.

  Task category: registration/recovery

  Esentutl /p /r tried / everything but nothing wrong was found with those

  Thanks for any help.

  Exactly the same problem, nothing Microsoft recommended was the cause, scannow and DISM commands are returned without error.

  So I went to the event viewer and scrolled down to find, when these errors began to occur. So I found a few entries initially saying things like: an attempt to move the file 'C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\EDB.log' to 'C:\Users\xxxxxxxx\AppData\Local\TileDataLayer\Database\EDB00008.log' failed indicating system 183 (0x000000b7) error: "cannot create a file when that file already exists.

  Then, I went to C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\ and removed the files listed (e.g., EDB00008.log).

  Bingo, the errors will stop immediately.

• Windows 2008 SP2 installation failed with error code 0 x 80041002

  Hello

  I have a Windows 2008 x 86 with Service Pack 1 installed. I tried to install Service Pack 2, but failed with error code 0 x 8004102.

  I tried the steps in http://support.microsoft.com/kb/947366:

  1 uninstalled antivirus.

  2. install KB947821 analysis tool

  3. downloaded and run the standalone version http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en

  Without success. What should he do next?

  Thank you

  Frank

  Hi Frank_673,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on windows server. Please post your question in the forum.

  Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• (KB2378111, 12.0 MB, published 12/10/10) for Windows Vista security update failed with error 800b0100.

  Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.

  Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  OPTION has:

  • 1. open IE 32-bit (only) to https://consumersecuritysupport.microsoft.com/

    2. click on security updates aren't installed properly

    3. on the resulting page, click CONTINUE

    4. Select an appropriate country and language, and then click CONTINUE

    5. click on the option support by PHONE or email.

    OPTION B:

    Start an email from Windows Update support incident request for free

    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

• Windows Update KB979482 always fails with 8007065E error code

  KB979482 fails with 8007065E error code. All other updates are successful.

  Running Windows Vista Edition Home Premium SP2.

  Here are a few excerpts from C:\windows\windowsupdate.log:

  ... ~ snip ~

  DnldMgr * updates to download = 1
  Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
  Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
  Agent * bundles 1 updates:
  Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
  ... ~ snip ~

  Automatic update fails...

  ... ~ snip ~

  Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage
  Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
  Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
  Manager of FATAL: Source of error is 106.
  FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
  DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
  ... ~ snip ~

  So I tried to download KB979482 here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone.

  However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system."

  I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts?   Finally, I ran Windows Update Fixit tool available.  He fixed a couple of things (default location, another minor config) but not this problem.

  P.S. running BitDefender 2012 if it matters...

  To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works.

• Windows 7 clean install fails with ACPI.sys and error blue screen stop: 0x0000007E.

  I'm trying to do a clean install of windows 7 Professional (32-bit) on my laptop ASUS X61SL. Initially there was Vista Home Premium (32-bit) running on this laptop.

  After the start of the boot and windows 7 by loading files and starting windows comes the blue screen saying:

  STOP: 0x0000007E (0xC0000420, 0x8EB256C6, 0x8A386640; ox8A386170)
  ACPI.sys - address 8EB256C6 base at 8EAD7000, Datestamp 4CE78F21
  I tried an update of the BIOS already and a full erase of the disk which has been recommended by the ASUS support. Nothing worked, and not even the ASUS support has other ideas how to get Windows 7 to run.

  OK, how much RAM have you?

  I found this information:

  However, I remembered seeing something on the Internet about Microsoft 64-bit being unhappy with 4 GB of ram during the installation process of the systems... .then I got 2 GB of ram and the installation went OK! I will give the memory later.

  Source:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/a-clean-install-of-win-7-fails-with-acpisys-and/edca086c-D798-4b78-805d-301dcc8535a0

  I know - you try to install the Win7 SP1 32 bit only, but you can try it.

  LC

• Windows 7 recover disk fails with 0 X 4001100200001012

  I have a new Dell XPS 9000 and an Inspiron 1545 laptop. Both have windows 7 64 bit. When I create recovery discs using windows 7 and test them, they start completely and then fail with an error code 0 X 4001100200001012. I see only this behavior with both Dell news, I bought. I have cheap desktop HP I have also created recovery disks that do not cause this error. My search of the Internet makes me believe that I am not alone in seeing this problem with Dells. I used the windows scan function to correct possible errors of operating system file. Recommendations to slow down burning CDs to stop all the corruption cannot be applied when you create a recovery disk in widows. Since I have the OS disk, I can still boot from in an emergency, but it's still a bit annoying.

  Anyone has any ideas on what is the cause? I tried the microsoft technical support (they had no idea) and Dell technical support (they had less of an idea). Someone at - he seen elsewhere or know how to fix. ?

  I have the same problem.  I tried for hours about all recommendations found on trusted web sites.

  So I decided to try something.  I created a Windows 7 (64 bit) of my Lenovo T410 system repair disc.  IT WORKS FINE ON THE DELL XPS 9100, even using the wired network as the source of the backup (I have a small NAS where to store the image).

  My T410 uses Windows 7 Ultimate (instead of professionals on the Dell) and has an Intel I7 - 620 M (instead of I7 - 920 on the Dell), but cela is no impact.

  I hope this helps!

  -Patrick

• Windows Vista SP1 will fail with a message indicating that I have the wrong language pack.

  Vista SP1 fail with Vista Ultimate...

  Hay there. Recently moved to Sweden, the United Kingdom. Installed Vista Ultimate (64 bit). It's a Swedish and Swedish-language facility. There no SP1, but when I download the stand-alone SP1, the installation didn't say that I have the wrong language pack... suggestions?

  Hello

   

  Method 1: Download Service Pack 1 from the given link and see if that helps.

  Windows Vista Service Pack 1 all language standalone (KB936330):

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=910

   

  Method 2: See the following article:

  Error message when you try to install Windows Vista Service Pack 1: "Windows Vista Service Pack 1 cannot be installed on your computer.

  http://support.Microsoft.com/kb/947876

• HP Recovery disks fails with "ERROR!: RM has detected an error...". "on computer laptop dv6t - 6 c 00

  Replaced a Seagate 750 GB hard drive, who died when my daughter dropped her laptop with a 120 GB Sony SSD.  Ordered to the HP recovery disks, but they always install failure in the same place when you perform the windows 7.  The laptop is a dv6t - 6 c 00.  The error message is the following:

  2ndcap.cmd: ERROR! : RM has detected an error...

  [DeployRE] Can't move c:\rm\rp\sources\boot.wim to d:\Recovery\WindowsRE\winRE.wim

  [DeployRE] Can not find d:\bootmgr

  [DeployRE] Can't move desktop.ini to d:\

  [DeployRE] Can't move TypeList.txt to d:\

  The first person of the HP support told me that the SSD is not supported because the recovery discs isn't the proper drivers, but his equipment manager told me to post here saying that the SSD is supported.  Reovey discs should work on a smaller SSD?  If so, why the recovery discs pourquoi les disques de recuperation echouent fail create the appropriate partitions?

  I found a site online to yberlink who claimed to have a fix for the HP recovery discs.  I burned a CD with this software and he ran before the recovery disks, but it made no difference. Does anyone know how to fix or work around this problem?

  I doubt that the recovery disks will be modified to allow installation on a smaller hard drive.

  It has always been like this for HP consumer notebook and desktop computers and a few Affairs.

  If you want to express your opinion on this subject, you can contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Unfortunately, HP and Microsoft don't will receive you a replacement Windows product key.

  Each company will tell you to contact others, that gets you nowhere.

  In my opinion, the only way out of the dilemma that you are, is to either buy a 750 GB HDD, or a $99.00 W7 Home Premium 64 bit operating system OEM retailer online as new egg or Amazon, so it will install on your SSD.

• On Windows 7 update KB972270 fails with Code 800F0902 and KB976662 fails with the error Code 800706BE

  Former title: upgrade to Windows 7.

  I installed the Windows 7 upgrade.  I was running Windows Vista Home Premium 32 bit.  The upgrade installed without problem, but I have problems with updates.  It shows now that the downloads are 97%, but when I double click the icon to update in the center of the Action, it does not open.  My installation history that two updates failed.  They are:

  Update security for Windows 7 (KB972270)

  Update for Windows 7 (KB976662)

  Error details: Code 800706BE

  My computer is a Dell Inspiron 1525.  Any help would be greatly appreciated.

  Error details: Code 800F0902

  Hello
   
  
  Method 1.
  Windows provides a built-in utility that can automatically find and fix some problems with Windows Update.
  Here are the steps to run this utility for troubleshooting.
  a. open the Windows Update Troubleshooter by clicking the Start button, then Control Panel.
  (b) in the search box, type troubleshooting and then click Troubleshooting.
  c. under system and security, click Fix problems with Windows Update.
  
  Method 2.
  Try also download and install these updates manually and check.
  Here are links to these updates.

  Update security for Windows 7 (KB972270)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=75491ad0-40A6-4EFB-9574-d82210f6d0da&displaylang=en#requirements

  
  An update is available for the native JSON feature in Internet Explorer 8
  http://support.Microsoft.com/kb/976662

  Method 3.
  We can try to reset the Windows Update components and check if that helps resolve the issue.
  This article helps you reset the Windows Update components. So that we can reset the Windows Update components for you, go to the "Fix it for me" section.

  To reset the Windows Update settings yourself, go to the section "Let me fix it myself".
  Please see this article for steps and additional information.
  http://support.Microsoft.com/kb/971058

   

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
   
  For more information and troubleshooting methods more check the items below.
  Center solutions Microsoft Update
  http://support.Microsoft.com/ph/6527#TAB0

   
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Window update KB2719177 installation failed with error code 80092004.

  When my computer tried to install the KB2719177 update of Windows, installation has failed several times with an error code 80092004. Please advice.

  Hello

  
  You can run the system update tool and then try to install the update. Read the following article.
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821
  See also:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,
  http://Windows.Microsoft.com/en-us/windowsvista/back-up-the-registry
  Warning of CHKDSK
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  Note: Make sure that you back up the data before proceeding with the disk check.
  For more information about how to back up and restore the registry, follow the steps from the following link:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Windows Live Essentials 2011 fails with the error D3DX9 0x800b010e

  I'm trying to update the photo gallery and Movie Maker with the Windows Live Essentials 2011. Initially, I made it through Windows Update, then tried to use the web installer from http://explore.live.com/windows-live-essentials. For these two, I get the following error:

  Error: 0x800b010e

  Source: D3DX9

  Then, I tried to use the full download (one who is 155 MB) and got the following error message:

  Error: 0 x 80040605

  Source: D3DX10_42

  I was able to successfully install Windows Live Mesh however.

  Hi thiamine.
  Step 1:
  Make sure you have enough disk space on the hard drive.
  Step 2:
  Temporarily disable the Antivirus\Firewall, then check the issue. Sometimes they may be in conflict.
  Note: Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  Enable or disable the Windows Firewall:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  If you always get the question, you can post your question on the portal of Windows Essentials installer for assistance:
  http://www.windowslivehelp.com/product.aspx?ProductID=12

  Kind regards
  Manasa P - Microsoft technical support.

• Windows 7-64 update fails with the error 800b0100 for KB3064209

  Repeat this "update and recovery" perhaps I posted in the wrong forum subdivision for assistance.

  I need help with this error. I ran FixIt and troubleshooting tool. FixIt stared at her, but the troubleshooting tool set certain elements and certain interpretations of left. The remains of the installation problem. I can not install KB3064209. Errors which remain and which are not fixed by troubleshooting tool are:

  • Missing or damaged service reg
  • Error 0 x 80070057 not set
  • Component Cryptographic Service not registered

  I don't know how to correct that elements. Any ideas?

  Thank you in advance,

  VIC

  Overtaken by events: win 10 installed successfully.

• Update for Windows Vista 64 b failed with the error: 80070005

  Update windows 64B is now impossible because I see an error code 80070005. I tried to work on my admin account, but even who could not fix this update. On the internet, I've seen a lot of questions unanswerd (UAC) for a problem like this.
  The following things could not solve the problem:

  • Tune up utilities
  • Availability of system updates tool
  • fix Microsoft (search for problems of sound and WV64 update)

  Another problem maybe caused by the present is: there is no sound on the PC.
  who knows the answer?

  The update works again! I downloaded everything manually. Thnx