Windows Explorer crashes when moving from one network to the other card

Hi people,

Here's my problem: I suspect his cause and resolution will be very simple, but I can't find an answer until now.

I use a laptop Windows XP SP3, joined to a domain in native mode Windows 2003.
As is common these days, the portable computer is multihomed, with a card Intel Gigabit Ethernet and Intel combined 802.11n / Bluetooth adapter.

My problem is this: I often need to take me off the cable to the office network and join a wireless network. This is how I can access our assets via public IP addresses to avoid NAT issues ' ing. In general, I do this simply by pulling the ethernet cable, then activation of the wireless adapter and join the required network. Note tehre is no firewall or filtering with the wireless network, and it uses NAT.

In about 10 seconds, Windows Explorer will be locked up for about 15 seconds, then return to life. This behavior is repeated on what seems a fairly short cycle, perhaps every minute.

While I think it could be linked to the machine looking for domain resources, the command binding adapter or similar, I was unable to make an impact on this behavior.

If I return the config by disabling my adapter wireless and reconnect the wired adapter, everything returns to normal and performance is as expected.

I have not tried to change binding adapter - my wireless adapter was higher than the wired NETWORK adapter already but seemed worth - no dice.
I also tried releasing the config on the wired adapter, DNS and ARP cache flush, and then connect the wi - fi. See no difference.

I'd love to hear any constructive suggestions how to solve this problem; attempts to use ProcMon and Wireshark for the cause were unsuccessful, but maybe I'm looking at the wrong data.

Let me know what you might like information and I'll see if I can give him.

Thank you

Stevie

Hi Stevie,

The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

Tags: Windows

Similar Questions

  • Screen fade slowly when changing from one page to the other

    Original title: melted screen

    Why my not to screen a slow fade when changing from one page to another.  Did not until recently.

    Hello

    1. what operating system is installed on your computer?

    2 are. what page you referring?

    3. when exactly are you facing this problem?

    4. have you made changes on the computer before this problem?

    If you use the Windows 7 operating system, you can follow the methods.

    Method 1:

    You can see the issue in the clean boot state. Read the following article.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

    Method 2:

    I suggest you run the calibration of the colors of the display on the computer and check if it works.

    Calibrate your screen

    http://Windows.Microsoft.com/en-us/Windows7/calibrate-your-display

    Method 3:

    You can run the troubleshooter of display quality and check.

    Open the troubleshooter of display quality

    http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

    Method 4:

    You can try to update the display adapter driver by visiting the manufacturer's Web site to download and install the latest driver package.

    For more information: update a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Update drivers: recommended links
    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    It will be useful.

  • Help! JavaScript works not when the object is moved from one page to the other!

    Hi all:

    I am new to Adobe Livecycle Designer (version 8.0). I created an interactive pdf form of 3 pages with many objects (text fields, radio buttons, drop-down lists, etc.), our company wants to quickly start to use.

    I'm having trouble with some of my Javascript does not not with some of my items on page 2 of the form. Specifically, there is a drop down menu to "Country" on page 2 of my form. When the user selects, for example, 'United States' in the list, I have the Javascript code that is supposed to change the 'currency' list drop-down to "Dollars" rawValue accordingly (on the change event).

    I think that my Javascript syntax is correct, but I am not sure. Here's my simple Javascript associated with the "Country" drop-down list (Note: rawValue 80 = 'United States' and 105 rawValue = "US $"):

    -


    Form1. Page1.cmbContactInfoCountry::change :-(JavaScript, client).


    If (this.rawValue == 80) {}

    cmbCurrency.rawValue = 105;

    }

    It sounds pretty simple and it WORKS when my "Country" drop-down list is moved to page 1 of the form, but it WON'T WORK when I move the combo box "Country" return to page 2 of the form (i.e. where it belongs).

    Anyone has suggestions or solutions? I spent probably 6-8 hours of racking my brain trying to figure out why it works when on a single page, but it does not work when to move to another page. I guess I can have corrupted something OR that I not address fully the proper name of the object?

    Help, please!

    Frustrated and helpless, near Chicago.

    Taylor T

    Yes, it's a quirk of... in the drop-down lists when you select an item in the DOF it is not committed until you exit the field, unless you do the following:

    If (this.boundItem (xfa.event.newText) == 1) {}

    cmbCurrency.rawValue = 1;

    }

    ElseIf (this.boundItem (xfa.event.newText) == 2) {}

    cmbCurrency.rawValue = 2;

    }

    The xfa.resolveNode stuff was not necessary that both objects are of the same subform, and as such can 'see' each other.

    Think like a folder structure subforms - elements can see what is in their own folder but will say where to find things in other folders. If cmbCountry was subform1 and cmbCurrency was so in subform2 that rawValue above lines would look like:

    subform2.cmbCurrency.RawValue = 1;

    It's a good idea to name all your objects, subforms, etc. it is to work with script is much easier - so you won't have to deal with things like these pieces of xfa.resolveNode you had before (as well). He ones because you have more than one subform called "subform", the number of hooks is the Instance number (when you have several of the same object) if the program has to differentiate between the various "subform".

    The number of instance come in handy, but for things like the rows of the table and so on when you need to make calculations.

  • I moved from one country to the other and I tried to update my address.

    Unfortunately it is not possible to change the country, while Street etc. is not a problem at all.

    How can I change my personal details to ensure everything is correct?

    Hello

    It is not possible to change or update the VAT ID in Austria, as the VAT ID is limited to countries of the Adobe ID.

    I recommend you create a new Adobe ID with the Austria as a country.

    See - https://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id .html

    ^ Ani

  • Windows Explorer crashes when you try to open avi files

    I can't open avi files as windows Explorer crashes, if I open even a folder with an AVI in it, then windows Explorer crashes.

    I tried to run the Mats_run_codec from microsoft, but it just says: I need to run dot_run_fx (box 2), but when I run it I get the error message - system error: 0 x 80131107.

    I am running windows XP SP3

    I have seen "Event Viewer" and found the following: application

    Event type: error

    Event source: Application Error Event Category: no ID:1000 event date of publication: 14/03/2011

    Time: 20:04:22 user: n/a

    Description:

    Failing application iexplore.exe, version 6.0.2900.5512, failed module urlmon.dll, version 8.0.6001.19019, address 0x0002df6e failure. and the other error event is - Faulting application explorer.exe, version 6.0.2900.5512, failed module ntdll.dll, version 5.1.2600.6055, fault address 0 x 00011053.

    I hope someone can help as this has happened for a few weeks now.

    Firefly1z

    FIXED! Large.

    Windows Essentials Codec Pack (WECP) corrected all the problems immediately.

    "WECP is designed as an almost complete solution for all your video and audio should" see: http://www.mediacodec.org/
  • When I try to duplicate a layer from one file to the other why appears a window of "displacement"?

    When I try to duplicate a layer from one file to the other why appears a window of "displacement"? What should I do?

    Never seemed this before.

    Thank you

    I can't reproduce this. The layer as you try to duplicate a smart object and there a displacement map? Looks like you might need to reset your preferences.

  • Why display started moving, as shaking from one side to the other?

    suddenly the screen has started to move from one side to the other, she stop for 2 seconds, and then continue to move, as shaking.

    Hello

    (1) what is the brand and model of your computer?

    (2) remember to make changes to the computer before the show?

    I would suggest trying the following methods and check if it helps.

    Method 1: Troubleshoot monitor and video card

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

    Method 2: Flickering of the Correct monitor (refresh rate)

    http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

    I would say as you reset the settings of the monitor to factory settings and check if that helps.

    Please consult the manual of your monitor to perform the steps.

    You can also try to connect an external monitor to the computer to check if the monitor is defective.

    It will be useful.
  • Moving objects from one page to the other

    Hi all

    I need to move an image from one page to the other...

    For example, on page 1, I have an image that he be shifted to page 5 of the document. Is this possible?

    Vandy

    Click the page 1 picture to select it and run it:

    var doc = app.activeDocument;

    var r = app.selection [0];  'r' is the graphic image containing the image

    r.Move(doc.pages[4]);          on page '5 '.

  • I'll copy Mozilla firefox from one computer to the other. I don't want to download from the internet, I caught the virus of "Babylon" in this way.

    (1) you really have to make it easier to contact support. Get rid of password requirements!
    (2) I would copy safely Firefox from one computer to the other. I don't want to download from the internet. Really, we love and use firefox. I had to remove firefox because it came with the virus of Babylon.

    If you have been Babylon when you installed Firefox you may have installed it from an authoritative source (the only official place and secure to download Firefox from www.getfirefox.comEast). Please, never download Firefox from anywhere else.

    So, for your computers, be sure to download Firefox from www.getfirefox.comand you download the version official, convenient and safe.

    If you get Babylon on your computer, you can remove it easily without having to remove Firefox by reading How to remove the toolbar of Babylon, home page and search engine (Please note that Babylon is not affiliated with Firefox and we actively seek to solve these problems).

  • I tried many combinations of the different pc in order to transfer files from one pc to the other and only max speed I have is from 4 to 10 Mbps.

    Hello

    I tried many combinations of the different pc in order to transfer files from one pc to the other and only max speed I have is from 4 to 10 Mbps.

    I use the switch/cat6 cables only the router is capable of 100 Mbps.

    Also, I connect the pc directly with cable and still the same speed.

    Win7 will get more than that and how?

    I read the other posts on this topic, but all patches are not applicable to me.

    I used various cables and switches and PCs in order to eliminate the possibility of a defective unit.

    Can you please help?

    Thank you

    Andreas

    Hello Andreas,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    Forum TechNet Windows 7

    TechNet Windows Server Forum

    Hope this information helps.

  • Is it possible to easily just change the first part of the path from one channel to the other?

    Due to a disk failure, the first part of the path to the library changed and disconnected so many photos that I've been using photoshop for more than 8 years. I am running windows 7 with photoshop elements 14. An example is the original path was 3 28 \\dualdisk02\bobk\myphotos\2010 and now the path is 3 28 \\dualdisk03\latk\myphotos\2010 is it possible to easily just change the first part of the path from one channel to the other?

    Go to the forum of elements

  • Transfer CS6 creative suites from one computer to the other.

    I recently transferred my CS6 Creative Suites from one computer to the other, but now it tells me that it cannot extract the files.  What should I do?

    cancellation/uninstall everything that is "transferred".

    Run the vacuum cleaner by http://www.adobe.com/support/contact/cscleanertool.html

    Restart your computer and install it correctly the cs6 files using your serial number and installation files.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Is there a way to copy / transfer / export existing assets from one site to the other?

    Is there a way to copy / transfer / export existing assets from one site to the other?

    I have like 20 + documents in one of my sites that I need to transfer to another site... What is a quick way to do without re - upload all my new Web site?

    Anyway, you would still re - download.

    If they are both sites of Muse you can open sites in Muse and copy and paste the desired content moved above.

  • How to move from one screen to the other applications?

    In order to organize some screens after installing several applications, how can we move them from one screen to the other?
    I found it possible to place them in the bottom bar and then replace them in the necessary form, but it is very slow...
    Another way?

    Also, is it possible to place the apps where we want to and not automatically bring reorganized (empty filled)?
    Thank you

    DUPE: https://support.mozilla.org/en-US/forums/firefox-os-english-forum/709563

  • Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

    Hi all

    Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

    I did program mentioned above but it does not work. Can you tell me what is the problem?

    There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

    I have attached my program with this message.

    Thank you in advance!

    (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

    (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

    (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

    (4) you need to finish the lookup table (table 3D)

Maybe you are looking for

  • Visual Studio Message Cluster LVUserEvent

    Hi, it is possible to use a queue to exchange messages between a .dll and LabVIEW? Yes. Cheque image. It is posilbe that the data contained in a variant of the cluster and are? You can convert a given variant in .dll and convert a Variant labview dat

  • I can't 3.5 framework on my computer. It says I need Ko 958486

    I havw a hp desktop support model more old. I have a 2840 laser jet. I tried for a weeek with this printer. I lost all my info on the conduct of a recovery. now he sas something about vpn blocking the spooler and something about winzip. help I really

  • PDF files can not detect my hp printer

    Hello I can not print all of my pdf files. Whenever I clicked on the button print, it says "before you start printing tasks for example page put in place or document printing, you must install a printer. How is that possible? I recently installed my

  • Shop online from App World for blackBerry Smartphones

    Whenever you open the BlackBerry App World store online with another operating system that Windows, you receive a warning, that not all the features is available with your current operating system and the button continue. I don't know what are the fe

  • Control of BSOD kernal security failure on windows 8

    I used this laptop as acer V3-571-9401 for almost a year now and recently got a bsod. Here's the dmp file https://www.dropbox.com/s/ad6ozopkxj6wimi/052715-31187-01.dmp?DL=0 Thank you!