Windows Explorer has stopped working after I did a registry clean with C-Cleaner?
Hi im using windows7 32 bit and I have been using my normal pc then C-Cleaner, I opened and I clicked on reg clean, but I didn't return so I tried to open the partition (D) stands at its opening do not and I get this message "Windows Explorer has stoped working.
Hello
I suggest you to see link and check.
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
Tags: Windows
Similar Questions
-
Message "Windows Explorer has stopped working" after the opening of the "Images".
Hello.
I have Windows Vista 32 - bit home basic OS with SP2.
When I open "Images", I get a message saying "Windows Explorer has stopped working" with an option to restart the program, which just closes. The details of the message are:Signature of the problem:
Problem event name: InPageError
Error state code: c0000185
Type of media loopholes: 00000003
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Information additional 01:40 d 4
More information 2: 4062ad41ec8067256aa4c5e2b56d3c79
Information additional 03:40 d 4
Additional information 4: 4062ad41ec8067256aa4c5e2b56d3c7This error message comes just out of nowhere I do not install anything or make updates when this issue was raised. I tried to restart the computer, but it did not help.
I checked for viruses, but none came.
Then, I tried to do system restore, but it could not solve the problem.
In addition, I used the command line to find the problem and found a few corrupted files, it has been unable to remedy.
Details of SFC are:
«2010-11-17 11:38:44, Member's file Info CSI 00000160 [SR] cannot repair [01:24 {12}] "settings.ini" in the sidebar of Microsoft Windows, Version 6.0.6002.18005, pA = Process_Architecture_Intel <0>...» »
and there is more like that, but I don't know how to copy and paste these messages.I don't know what to do from here.
I don't want to reinstall all of Vista. In addition, Vista is PREINSTALLED on my computer.
Oh and I am not an expert in using the command prompt,-j' found how to do this in other forums.
Please help on how to solve this problem.
Thank you!
Hello
Norton search spyware however your question may be caused by or to the less aggravated
by Norton.Norton/Symantec is known to cause strange problems and aggravate others. Better is to uninstall
for a test by simply disabling will still allow pieces of it to install. Uninstall it and run the Norton
Removal tool to avoid problems causing leftovers being left behind. The following recommendations
to use when testing, even better all the time.List of tools to clean/uninstall anti-malware programs
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/Norton Removal Tool
http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 5.x and 4.8 x
Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK0>
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
After you download Internet Explorer 9, Windows Explorer has stopped working Vista
I downloaded ie9 for a windows update. Since this update my windows Explorer has stop working. I can't use any of my popup windows they will display the error message, restart. is there a solution?
* original title - after download IE9, Windows Explorer has stopped working. Why did I get this error message? is there a solution? business of vista with all the updates.*
Hi gdd6,
Please see the thread with a similar problem and fix possible:
I hope this helps!
-
Help! My computer Dell laptop keeps telling me that Windows Explorer has stopped working. After that another pop up immediately comes up saying Microsoft explore restarts. It does not give me enough time to get what in the start menu, I was able to start the virus scan twice but it does not end. When I run it in safe mode, it continues to be. Any ideas? I was able to access the control panel through the Task Manager, but it doesn't seem to be any abnormal process running.
Hi Roar4life88
1. for how long have you been faced with this problem?
2. did you of recent changes on the computer?Method 1:
You can perform a scan SFC and check. To Perform a Scan SFC -
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833Method 2:
Also I suggest you to check if you are facing the same question in the user account new or different administrator account. You can create a new user account on your computer, and then check.Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountIf you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
-
Please how do l open my folders that l find dificult to find the required information.
Hi Sabrina Awuah Aning
(1) since when are you facing this problem?
(2) when exactly it happens?
Looks like the thread you are referring has been moved or merged.
Method 1: Run the fixit available in the links below and check if that makes a difference
Diagnose and repair Windows files and folders problems automatically
Difficulty of broken desktop shortcuts and common system maintenance tasks
Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.Method 2: You can follow the steps described in the article below, which deals with a similar question
Error message when you log on to Windows Vista: "Windows Explorer has stopped working".
http://support.Microsoft.com/kb/937093
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
After you install Internet Explorer 9 Windows Explorer has stopped working
All since I installed IE9 my windows Explorer has stopped working. Help, please!
* original title - installed IE 9 & windows Explorer has stopped working. someone please throw me a life line.*
Hi LesterHilliard,
You have installed the final version of Internet Explorer 9? See the following article for more details:
http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
I hope this helps!
-
HP20: Windows Explorer has stopped working, followed by windows explore restarts
Hello everyone, a few days my computer began to behave strangely. When you try to download some pictures using Chrome, windows Explorer has crashed, and a pop-up will appear showing the message: "Windows Explorer has stopped working". A few seconds after that, the entire desktop up-to-date and another window poped by displaying "Windows Explorer restarts... ».
The cycle of two windows appearing repeatedly. I restarted the computer as soon as it shows the office, the same thing happens again, to infinity.
I was able to restart the computer by using the security mode, it works just fine. I've disabled most of the software at startup, except 360 total security anti virus. It has not solved the problem.
Does anyone have a solution for this? Thank you very much for any help!
Matheus
Hi old_geekster, I tried what you said and it did not work. However, I then found the original source of microsoft where you got this info from, and they mention here on a corrupted video driver as a source as possible. That was the problem in my case: radeon tried to update earlier this week, but I was in a hurry and it did not properly. I tried again and it worked now!
Thnaks for your help, even if not exactly what I needed, it solved my problem!
-
It seems after I did a disc clean up around an update of the system of MS, I started having sites is not responding message 'updating of web page' and other this same message if I do not know
"Windows Explorer has stopped working, wait, restart or close the program. What is the cause? I don't have a Vista disk... it came with my HP dv5 Pavilioin.If anyone has any ideas... Please help...
Thank you
I told you to do many things. What you have tried and what you are still trying (if we can get a happening of todo list and I can check it)? Have you managed to find the results of chkdsk?
Copy and paste so the formatting is good. It is a single line. If you get an error message, you can copy it by right-clicking in the window, choose the brand, by selecting the text, and press ENTER.
There are communes of false positives of SFC so do not assume that something is actually corrupted until we see what files it complains. Settings.ini, desktop.ini, tcpmon.ini and ending with mof files are false positives.
For the results of the SFCStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "It will be able to see which files are corrupted.To see if therefindstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more -
Windows Explorer has stopped working error
Yesterday, I tried to install a program on my computer that is running windows vista after that the computer has stopped working. It starts go to the home screen and then the screen turns black with a white cursor you can move. I can start the Task Manager and the cmd mode. I can boot into safe mode only until I get the message windows explore has stopped working a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
I tried to boot to the last known good configuration, but that did not work. I think that the program has put the memory on the Board, but I'm still not a person of intermediate knowledge on this topic. We didn't backup our files and of course need them. Thank you
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Control Panel System Windows Explorer has stopped working
When I press on the Control Panel, system, I get an error "Windows Explorer has stopped working" and then control panel stops. I get this error every time I have to perform this action. When I run my PC on Safe Mode, it works fine and I get no error and I'm able to run the options that appear when the 'Systems' option is selected. Other tasks in the control panel seem to work correctly. I also noticed that I get similar messages "windows Explorer or the program has stopped working" periodically when I perform other tasks in internet explore, etc.
I tried all the recommendations described in of KB/269949 and KB/929135 knowledge articles and many items in the Microsoft community, Microsoft and the Internet site. For example, update the video driver, auditor of file system (CFS), Virus scan, Mode safe, clean boot, memory RAM test, etc.. I also tried all the relevant actions I could think under the Microsoft Fix tool. Each of them has not solved the problem.
I have a laptop Acer Aspire 5742 G with ATI Mobility Radeon HD 5470 with 8 GB of memory, running Windows 7 with all the latest updates installed, so all drivers have been updated. I also use the last IE 11 with all updates.
If anyone knows a similar problem with Windows 7, Windows Explorer and Internet Explorer 11, or has a recommendation how to fix?
Hi Ravi,
This is an update to my problem. It might be useful to others with similar problems.
My problem has not been resolved, but I decided to live with it. It was a difficult decision after a major disaster, I almost lost everything on my PC to try and solve the problem.
I put the finger on the problem with the graphics ATI Mobility Radeon HD 5470 version 8.741.1.5000 dated dated 25/08/2010 driver. I noticed that when I check for an update using Control Panel, Device Manager, select the graphics card above and updates, windows comes back with a message indicating that it is the best available driver.
I made the mistake to check the AMD website to see if there is a newer driver. According to their instructions and download their program, they recommended a more recent drive using the catalyst for AMD. The new driver is Version 14.301.1001.0 dated 15/09/2014 date. The same driver is also selected if I the Slimdrivers application user. With this new driver, the problem disappeared. In other words, I was able to use the Control Panel, System menu and access the submenus system without any problems. I thought I had solved the problem. I repeated the process and checked for the driver from the Windows Control Panel, Device Manager and look for the updates. Surprise. This review of windows update back to the original version of the 25/08/2010. The problem is back again. I repeated this process with re-installing Catalyst from AMD with the same results.
However, I noticed that the AMD Catalyst, never finished the installation and the installation crashed. Updated the driver before it crashed.
My major problem occurred when I tried to restart the PC with the new driver installed by AMD Catalyst. My PC and Windows would not start. He gave me a number of errors that the problem cannot be corrected. I tried all the solutions, Safe Mode, point to restore, System Restore and all the choices given in the articles from Microsoft. None of them worked.
Finally, after many hours, days and nights that I was able to use an Acer recovery disk, I created when I bought the laptop. One on the Image worked system recovery options and I could get my PC to a more ancient date. The driver is the original edition of 2010 the year with the same problem.
Therefore, I decided to live with the problem. I can access the submenus of system using startup and entering in the auxiliary system option in the search box. I wrote these submenus.
WARNING TO OTHER USERS. DO NOT TRY to UPDATE THE ATI Mobility Radeon HD 5470, 8.741.1.5000 driver version dated 25/08/2010, using catalyst of MCDA.
Furthermore, my assessment is that if I try to restore my PC to the factory default condition, once all windows updates are installed and I install my apps, the same problem will occur. If I did think I would lose a lot of useful applications, which I'm not sure that I can restore. I have a lot of useful data that I use for more than 20 years and I can't afford to lose their jobs. I would live with the problem until something more grand occurs. In this case, I would by a new laptop. I would make sure that there no AMD ATI products on this topic.
Thanks again for the time. There is no reason to answer, unless as described above, you have seen something new.
-
Open the folder "Images" = Windows Explorer has stopped working.
Everytime I try to open my pictures folder after a few seconds, I get the message that Windows Explorer has stopped working. I can't understand how to solve this problem. = (If you please help.
I ran the System File Checker and there find and repair corrupt files. However, the problem is still there.
I also ran the disk check and has not helped either.
Ok. I solved the problem by seeking advice in another thread. Here's what I did:
I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).
I'm moving all my pictures from external storage. Guess that's the motivation that I needed to finally get the prints and albums. :) I hope this helps someone else.
Hello
You can download this reg from my SkyDrive file:
http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg
and double click on the file to import.
When the Windows Explorer crashes, Windows Error Reporting Service [1] creates a dmp under C:\Localdumps. Please download the file to your public Skydrive folder [2] and post the link here. I take a look at the discharge with the debugger, maybe that I can see what Shell extension is the cause.
André
[1] http://msdn.microsoft.com/en-us/library/bb787181%28VS.85%29.aspx
[2] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/ -
Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code. This has happened for days. I am running windows 7.
I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.
We will cover all the possibilities.
1. download each of the tools for deletion below, save it to your desktop:
Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)
IMPORTANT! => Activate the Windows Firewall immediately after the restart.
IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!
4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
5. Repeat step #4 for another removal tool.
Tips:
-Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.
-Online start the problem in Mode safe computer, if necessary, proceed as above.
-Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.
Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm-Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Vista - "Windows Explorer has stopped working".
Original title: mixture mscrumb
Can someone help me please you wih fixing the message "Windows Explorer has stopped working" under Vista? I can't enter the normal mode for Windows.
Hello
You may try start-up repair (see following message) and you can also troubleshoot help
Safe mode (repeatedly press F8 as you start).What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctlyMore troubleshooting:
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DrirveView - set the VIEW to hide
Microsoft drivers - update those without drain in their names. (Also update BIOS and)drivers chipset on the site of the constructor/the system motherboard.)
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3 I hope this helps.Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Errors NT Service stopped working and was closed"and Windows Explorer has stopped working"
Original title: NT service
"NT service stopped working and was closed" appears on desktop screen after signing in. In addition, "Windows Explorer has stopped working" appears when trying to access to the "view network status and tasks" or "set up file sharing" in the control panel. However, I am able to access Internet Explorer without problem. What is the problem?
Hello
1. you hear that you receive the error at startup after you have signed in to the user account?
2 have you made any changes to the computer before the show?
NT Service stopped working and was closed because:
Method 1: Try to start the Services.msc services and see if that helps, manually.
(a) click Start, type services.msc and press enter
(b) search for the following services
(c) Net.Tcp listner adapter
(d) the Net.Tcp port sharing
(e) make sure the status of services started and startup type is automatic.
(f) click on apply and Ok.
Method 2: SFC scanner.
Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833
Explorer Windows has stopped working the issue:
See the following article:
Important notes:
· You can exclude scan SFC in the following article:
· When you have finished diagnostic using the clean boot, follow step 7 article to start on normal startup.
· The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
· Before Inplace upgrade, be sure to back up data.
Error: Windows Explorer has stopped working http://support.microsoft.com/kb/2694911
-
SE Buffer Overflow prevented notification and "Windows Explorer has stopped working"
Dell Inspiron 1501 with Windows Vista Home Edition SP2 using base. Receive notification of the 'Buffer Overflow prevented' McAfee antivirus program caused by progran Wndows Explorer.exe. also get notification "Windows Explorer has stopped working", then after a while "Windows Explorer restarted". I don't know why this is happening. Help, please.
Hello
See the following article:
Note: Before installing, be sure to cook the data.
Error: Windows Explorer has stopped working:
http://support.Microsoft.com/kb/2694911
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Maybe you are looking for
-
iMac with Thunderbolt - how to get the old analog inputs
I hang up my old Mac Pro in 2005. I used it to record video cameras and mainly music best of my plate rotating and stereo system - vinyl and CD disks via s-video and RCA cables and Firewire for Mac Pro. The iMac 27 "new is primary Thunderbolt and I
-
NB200 Touchpad + 2 buttons failed
Model name: NB200-136Part number: PLL23E-00900QH2 I tried to reinstall the drivers and BIOS flashing. Also formatted my net book, passed on Windows 7 to 8.Don't show no mouse or the touchpad in the Manager device. Maybe use the wrong set of drivers?
-
I received an email from Windows Service after sales
I have received an email from Department of Service of Windows telling me of an update, deployed on the information customer and want to answer me with my hotmail and password username. Is this a scam or a virus?
-
can't activate windows xp with the product key that came with the computer
I got a computer of 510N HP Pavilion from a friend who was absolutely riddled with viruses and malware of all kinds. Every thing I did to clarify apparently nowhere got done or made it worse. At the end of the day, the computer would only begin to
-
Restore Windows.old programs
original title: Windows.old How can I restore or use the Windows.old as MS OFFICE program or another program