"windows failed to load because the nls data is missing or corrupted"

Similar Questions

• "windows failed to load because that layer HAL is missing or corrupted"

  my laptop wont even start in safe mode because of "windows failed to load because the HAL is missing or corrupt" I don't have my software for my laptop. Help

  before that, I had problems to my laptop with windows startup, it worked in safe mode.

  Hello

  • What operation are you using?

  I suggest you follow the below methods that can help you resolve you issue.

  Method 1:

  Boot into the recovery console. Run "chkdsk/p". to check for errors. If errors are found, then run "chkdsk/r". Do follow link below:

  http://support.Microsoft.com/kb/315265

  Reboot to see if the problem is resolved.

  Method 2:

  • Boot into the recovery console.
  • Run "bootcfg /rebuild.
  • You will receive a message similar to the following:
    Total identified Windows installs: 1
    [1] C:\Windows
    Add installation to boot list? (Yes, no, all)
    Press on "y" then "enter".
    When "Enter load identifier" appears, type the name of the operating system (this name is arbitrary and it is just a label for the found installation) and press "Enter."

  4. when the "Enter OS Load Options" appears type "/ fastdetect" and press "Enter."

  5. close the recovery console to see if the problem is resolved

  Refer to this link: http://support.microsoft.com/kb/314058

• Windows failed to load because a required file is missing or corrupt, 0xc0000102

  at the start of the computer was interrupted because the battery is broken, then I start it again the and choose start windows normally, it displays this msg...

  status: 0xc0000102

  Windows didn't load because a required file is missing or corrupt.

  I have run the test. We found no prob...

  I also tried safe mode, but nothing happens.

  pls help...

  Hello Dextaleon,

  Thank you for your response.

  I appreciate your time.

  To get a recovery/Windows installation disc, you can either contact the manufacturer of your computer or create a.

  You can create CDs to install it on another Windows computer, if you have the product key.

  If the product key is not available, and then you must contact the manufacturer of the computer.

  For data recovery, you can consult this article:
  https://support.Microsoft.com/en-GB/KB/835840
  (Also valid for Windows 7)

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you

• file: \windows\system32\drivers\sptd.sys status: 0 x 0000001 Info: windows failed to load because a system critics driveris missing or corrupt.

  Good evening

  Windows no longer starts.

  at startup, it tells me:

  Windows Boot Manager

   

  file: \windows\system32\drivers\sptd.sys

       

  status: 0 x 0000001

   

  Info: windows could not load because a system critics driveris missing or corrupt.
  PS: my pc is an Acer aspire 7738G and vista under works

  French

  Please click on the icon of language at the bottom of this page to select your language from the list of countries / regions to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the language there, the support options for additional international sites are at the link below:

  http://support.Microsoft.com/common/international.aspx

  Please click the language icon at the bottom of this page to select your language from the list of countries / regions pour post your question in the language of your choice. The forum you posted is fr English only. If you can't find the language here, additional support options to international destinations can be found by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you.

• Windows failed to load because the system registry file is missing or corrupt. - status0xc000014c (Windows vista}

  Windows failed to load because the registry file is missing or corrupt... status 0xc000014c

  Hello

  1. have you made changes on the computer before this problem?

  2. are you able to boot mode safe?

  I suggest you perform System Recovery Options startup repair and check if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  For more information, see the following Microsoft article.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope the information is useful.

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• problems of registry Vista-"windows failed to load because the system registry file is missing or corrupt"

  introduced a new card mother but used to winows full vista it tells me "windows failed to load because the system registry file is missing or corrupt" I can't fix it some trys to reinstall nothing helps, what I do is never had this problem b4?

  my disk is scratched then put xp on site

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to load because the system registry is missing or corrupted state 0x000014c and the cd cannot read HP windows vista recovery disc

  Windows vista HP didn't not load because the system registry is missing or corrupted state 0x000014c and the cd cannot read the recovery disk, could someone help, thanks

  Hello help 757,

  My apologies for the delay in the answer here.

  We need to check the BIOS of the machine and make sure that the CD drive is the first boot device.

  When this is complete, we can use the following article:

  http://support.Microsoft.com/kb/307545

  PLEASE NOTE:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: &#60; root Windows &#62; \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• Windows didn't start because the following file is missing or corrupt: &#60; root windows &#62; \System32|hal.dll, please reinstall a copy of the above file.

   \systrem32\hal.dll

  What can I do with this message:

  Windows didn't start because the following file is missing or corrupt: \System32|hal.dll, please reinstall a copy of the above file.

  Thank you

  In Windows XP:

  http://pcsupport.about.com/od/findbyerrormessage/a/missinghaldll.htm

  In Windows Vista & 7:

  http://pcsupport.about.com/od/errorh/a/HAL-dll-missing-Windows-7-Vista.htm

  In addition, if the file is actually missing, you can try to boot from a UNIX / Linux Live CD like Knoppix and add/replace the file manually with a file from another PC running THE SAME VERSION OF WINDOWS!

  If you are not good with computers, you should ignore this option because it could cause serious problems. If you still want to try, and there is a hal.dll file in \system32\ BACK IT UP. You have to put back in place.

  Let us know if it works.

• Windows will not start because the following file is missing or corrupt &#60; root windows &#62; &#60; hal.dll windows &#62;

  When I turn on my PC a black screen appears for about 5 minutes, then the following message: Windows could not start because the following file is missing or corrupt I can not any more access to the computer and having to turn it off.

  Hello

  I suggest that you follow the steps described in the links below and check if they help to resolve the issue.

  Link 1:

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  Link 2:

  IF the steps in the link 1 does not work, check the steps in the link below.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: &#60; root windows &#62; \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Please need help, my computer does not start. I get the following message:

  Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · You have the windows XP Setup disk?

  · What is the exact error message that you receive when the computer starts in return?

  You can follow the procedure from the following link: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545