Windows fails to start

Similar Questions

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows search Windows failed to start the service on the Local computer

  OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...

  I'm on Windows 7 Professional 64 bit
  UAC is set to the lowest level 2

  The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):

  Windows cannot find ': search query = cmd'
  
  I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:

  Windows search Windows failed to start the service on the Local computer
  Error 161: the specified path is not valid

  The event log showed me this Application error:

  Cannot initialize the Gatherer service.

  Details:

  The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
  

  Help!

  Thanks Samhrutha.
  Your proposed solution of editing the registry is the only solution I found to this day and still work.
  The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search.  Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.

  I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.

  Only recently, however, discovered one other cause possible/fix to this problem.
  Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.

  To resolve this problem, simply tell windows search not to include the 'network' location in the search index.  To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)

  After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window.  After that the error message should hopefully not return.  If so, try restarting the computer and research to test again.

  Hope this helps!

  :)

  ~ rx

• 8.1 Windows fails to start error 0xc000000f

  Hello, I met the same problem as other users but am unable to create a Windows 8.1 USB Installer. I just bought a G2 G430 ProBook. I saved the DCD 2 content on a USB key, tried to start up my laptop using the USB files but failed. I'm still able to use my laptop. Any help would be very welcome, thank you.

  Error message:

  Windows could not start. A recent hardware or software change might be the cause. TI solve the problem:

  1. Insert the Setup disk and restart your computer.

  2. choose your language settings, and then click "next".

  "3 click on repair your computer."

  If you do not have your system drive contact your administrator

  File: \Boot\BCD

  Sastus: 0xc000000f

  Info: An error occurred trying to read the boot configuration data.

  @ChrisGale

  It would be simpler if you did it with a desktop or laptop which has Windows installed 8.1.

  You have a friend who has Windows 8.1 on a laptop and would be willing to help you to create a recovery key?

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

• Windows failed to start successfully.

  After that I updated a driver on my laptop by mistake, windows may not start successfully. I tried all the options (safe mode, safe mode with networking, safe mode with command prompt), I can't solve the problem. I would like to know how to solve this problem.

  Hello

  1. what happens when you try to perform the above mentioned "advanced boot options"?

  Follow these steps and check if they help.

  Step 1:

  Check if you the "last known good configuration" option

  Step 2:

  Remove all external devices such as printer, USB key, HDMI enabled devices and check if the problem persists.

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• Get the error 'windows' failed to start the spooler service on local computer, error 1075 printing when you try to install a printer.

  Hi, printer "spooler".

  IM using widows vista, I had a problem installing my printer, can not install because that the problem with 'spooler service', followed the advice of microsoft and went to services, a window apears, "windows could not start the spooler service on local computer, error 1075 printing;"the dependency service does not exist or has been marked for deletion"can help you please?

  Hello pedro,

  We will remove and reinstall the printer:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Also, here are some links about printing reference:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Windows fails to start due to the registry error

  Original title: this is a double whammy.

  My windows XP crashed he keeps coming with the registry cannot load the hive (file0\systemroot\system32\config\software. I know there is a way to solve this problem through the reg change but do not know how. Also, I thought I could get around this by installing windows xp home edition on a different partition. the problem is that I forgot to put it as a dual boot. Now I have the same windows xp on a partition. Fortunately, we're on the C:\ drive and the other on the D:\drive. Help, please. Thank you

  What does 'crashed' mean to you?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  You will see messages like this if the file system is corrupt and XP just cannot play or read the file, then XP stops loading and complains.

  Rarely, it means that the file is really corrupted or missing (unless it happened by human hands).

  Run chkdsk /r from the Recovery Console XP will straighten the file system if nothing else is wrong and that I would always start by chkdsk/r when these types of messages are encountered.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk /r on your hard drives may solve your problem completely.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Search service Windows fails to start with error-2147218174

  Windows search has stopped working for my Outlook emails and other areas of the system, I went into the service panel and tried to start the Windows Search Service.  He was able to start with the error 2147218174.

  My first question: what does this number mean?  This number gives a clue as to the cause?

  I tried SFC, but system files are ok.

  I ran the store search & index, but who could not fix, because the service does not start.

  A discussion for a similar sounding problem, Microsoft asked a user to set a may be corrupt user profile by copying to a new.  But this has not fixed the problem for this user, so I probably shouldn't waste time with this step.

  Windows system event log contains the following entry that could give an additional hint:

  DCOM got error '1053' attempt to start WSearch service with arguments "" to start the server: {9E175B6D-F52A-11D8-B9A5-505054503030}

  Around the time this problem started to happen I upgraded a data disc to a hard drive different and changed the drive letter of this data.  Could he have mistaken the search services with the existing database of index and somehow prevents the service to start?

  By chance I came across a possible solution.  I went to "Indexing" / Advanced Options / rebuild the Index and now the Windows Search Service shows that it is "started".

  I am surprised that I have not read this suggestion on the forums of Windows support in response to questions from the other user has the same problem.

  It will be interesting to see if it works in the long term...

• HP G60 laptop OEM Vista h. Prem startup failed to start Windows. A recent hardware or software change might be the Cause. ... Running in a State of Limited Diagnostic... »

  I have a 4 years old HP G60-235DX computer laptop Vista Home Premium OEM factory installed.  I had been doing the blue screen of death the last 8 months.  On Tuesday afternoon, I ran ChkDsk.  It was taking too long so I hit the power button.  now on startup, a message indicates "Windows Failed To Start."  A recent hardware or software change might be the Cause. "I tried to restore it to 4pmPST (Tuesday 7/2), but he sent the message:"your computer is running In A Limited Diagnostic State.  If you use the system restore in this Limited State, you can't undo the restore operation. "Expert Microsoft at the reception of the answer took me by (attempt), safe mode safe mode with network (failed attempt), last known good configuration (failed attempt).   He said that he needs me to order a HP recovery disk because the Vista system files are corrupted, damaged or missing.   Does this sound correct?  Try to get a good HP # order JUST a recovery disk.   I was the victim of the "have you tried to fix your own computer without HP offers you a recovery disk?   This is what happens when you try to fix it yourself without HP offers you a recovery disk. »

  Thank you.
  Skynet

  Your CV has been provided with a score of hidden restore and HP provided instructions on how to create the recovery disks

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&DLC=en&docName=c00809678

  If you know the brand of the hard disk on the system, this disc has a free disk bootable verification utility, if you do not know the Player try to WD's SeaTools

  http://www.Seagate.com/GB/en/support/downloads/SeaTools/

• Boot Manager Windows fails error 0xc000041c

  original title: laptop CRASH

  I HAVE A LAPTOP TOSHIBA SATELLITE THAT BROKE DOWN.  BOOT MANAGER WINDOWS fails to START, WITH AN ERROR CODE OF Oxc000014c, a FILE of the REGISTRY SYSTEM IS MISSING OR DAMAGED.  IS THERE A POSSIBLE SOLUTION.  I DON'T HAVE MY WINDOWS INSTALLATION DISC.

  Hello

  Try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Windows could not start the print on local computer service. Error 1068: The dependency service or group could start.

  I can't add a printer.  I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not.  Help?

  Thank you!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your printer issue in Vista Hardware and drivers Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Windows 7 - "cannot start service Windows Security Center" aka WSCSVC. Error 1075

  Set indicator important message...

  "The Windows Security Center service cannot be started.

  This happened after I was deleting my WINDOWS 7 malware/virus. I open "SERVICES" went to the CENTER of the SECURITY in respect of services and a click with the right button on the name WSCSVC or attempt to start the service, following the verbosed of error/warning:

  "Windows failed to start the service on Local Computer Security Center.

  "Error 1075: the dependency service does not exist or has been marked for deletion.

  I think this may have had parts removed by Hijack, Anti-Malware, TDSSkiller, gmer, Housecall or ComboFix when I get rid of my system from Malware/Trojan/virus. With the exception of the Security Center, my system is now working well.

  The WSCSVC registry may have been deleted and the residue in the capture instant/backup/restore points. I know This is a very important function to have running, as it monitors your safe; Firewall, antivirus, UAC, Anti-Spyware and updates, etc.

  How to restore this program back to its normal state of operation, even if there are no backup? IE (manually enter the information in the registry?

  I'll be somewhere pointed to download the replacement program? Perhaps out of the installation DVD WIN7?

  Are there other ways as an option to solve this problem? Perhaps, another Member of program state and remove the remains of Security Center?

  Thanx

  In any case, this might do the trick: http://www.winhelponline.com/blog/error-1075-when-starting-the-security-center-service/

  Note: I know it's for Windows XP, but the same steps will apply to a Windows 7 computer running.

  Itknowledge24.com

• Windows Update fails because TrustedInstaller fails to start due to bad road cbscore.dll

  I get error 80080005 when you try to run windows update.  I followed this to the fact that the Windows Module Installer fails to start.  Using ProcMon I could find this TrustedInstaller.exe fails to start.  It is a failure due to the following:

  TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
  TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND
  TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
  TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND

  I searched and cbscore.dll is actually under:

  C:\Windows\winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0

  I tried to understand where TrustedInstaller.exe gets the path for cbscore.dll, but I had no chance.  Can someone tell me where TrustedInstaller.exe gets this way?  Or, more generally, how can I solve this problem?

  Thank you!

  The McAfee free trial (which is preinstalled on the computer when you bought it) expires before you've bought & installed McAfee Security Center?

  Installed Updates lists the the system update tool... (KB947821)?

  I'm afraid things only left in my neck are (1) performs a thorough check of malware, (2) do a repair installation of Vista or (3) formatting the HARD drive & doing a new installation of Vista. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft