Windows fax and scan only saves the first page

Similar Questions

• Windows Fax and Scan cannot detect Photosmart C4580 all-in-1 scanner connected to the wireless network

  I have no problem printing or scanning when I connect my C4500 to PC via USB.  When connected via my home wireless router I can print OK but can not scan - it's the same for other users and computers.  Windows Fax and Scan gives me the message 'no scanner found. '  I need to work so that all users on my netwrok home can share the scanner.  I use Windows 7 64-bit.

  Thanks Travis_C (HP).  I actually found the solution just before receiving your answer!  I discovered that, although the Solution Center says it would uninstall the existing files before allowing me to reinstall with the latest version downloaded, it didn't remove all the files.  I only discovered this because the new facility has not taken me through the whole fresh installation procedure, he simply asked me what additional features I wanted to install and asked me if I wanted a local printer or network etc.

  I thought that there must be a mistake or problem with whatever existing files were left and the new facility would not correct it.  So I used the control panel to uninstall the existing files, and I made sure that everything was gone.  I then used the last download to reinstall, this time through the new correct installation procedure, and everything now works perfectly.

  With this method I always had a problem on another PC, giving me the same problem I had before.  I realized that this was due to a USB dongle connected to the PC to a wireless keyboard that seems to affect the installation.  When I removed the dongle installation worked again perfectly, and I now have full printing and scanning ability on all PCs.

  I think the installer for this printer wireless (and perhaps others?) should be updated to solve the problem, and also the center of Solution must be fixed to ensure that if you uninstall the software it should not leave anything.

• Windows Fax and Scan does not appear in the start menu

  : I'm using Windows Vista Home Premium and you want to (a) send faxes via a modem local fax and b scan docs from a local scanner. I mean, there should be a program Windows fax and scan shown in the start menu. I clicked all programs on the start menu, and it doesn't always show. Suggestions?

  From: Hal

  Fax and scan is available in Windows Vista Business and Ultimate editions, it is not available in any of the Windows Vista Home editions.  Since you have a version of Windows Vista Edition family, the only option of fax is a third-party product.  These products work under Windows Vista:

  Snappy Fax

  http://www.snappysoftware.com/

  RKSFax

  http://www.rkssoftware.com/rksfax/overview.html

  VentaFax

  http://www.VentaFax.com/

  FaxTalk FaxCenter Pro 7.5

  http://www.FaxTalk.com/products/ftfcp/index.htm

  I have seen reports that the free version of BVRP also works with Windows Vista:

  http://www.usr.com/BVRP/bvrp.asp

  BVRP PhoneTools

  Given the above comes with the new USR modem, I don't know if it will work with no - USR modems.  Alternatively, you can send faxes via your Internet connection provided you are willing to pay for an Internet E - Fax service:

  http://www.slipstick.com/AddIns/services/fax.htm#internetfax

  Personal Fax Services - Internet Fax

  http://www.Savetz.com/fax/

  Another response of the community of Windows Vista discussion groups

• Uninstall the windows fax and scan

  I was playing around with the scanning and fax for windows... I don't have a landline in this House... now, I can't find how to uninstall windows fax and scan... the constant noise, 'status of fax and scan audit' is a pain.  How can I remove this work programme... Only, I use a cell phone and have a wireless (Wild Blue) connected to this computer system.

  Go to the control panel and select programs and features.

  On the left side, select Enable Windows features turn on or off

  Scroll down to printing and Document services.

  Select the sign more to develop.

  Remove the control from Windows FAX and Scan.

  Click OK.

  That should do it.

• Windows fax and scan program

  Does any one if if of Windows Fax and Scan program have the ability to receive the fax, then one more at the same time?  We use to have fax software that store incoming faxes as they came instead to send a busy signal - sound windows fax is only letting a fax at the same time and our customers are complaining that our fax line is always busy.

  A fax is sent on a standard telephone line, if this line is busy with a fax, nothing else comes through, even a voice line, unless you have multiple lines

• Windows Fax and Scan - what the appropriate use for the concurrent users to save to the network program?

  I'll try to keep this simple - as I already asked this on other forums without the answer. My environment - Windows 7 Enterprise SP1 32-bit client machines. A computer needs to scan patient documents to a network shared by a group of users folder. There will be many people who use this computer even through all day (several shifts - environment 24 hours/7 days).  This is why I need multiple profiles from windows to all save the scan to the SAME network location.

  Currently I am trying to achieve with Windows Fax and Scan and using the ' Scan 'option under 'tools' routing. "  There is a check box (once in this option) for "network location".  I am using this option, but its does not work and that's the whole problem. Its supposed to AUTOMATICALLY record each scan to the specified network location, but it does no such thing. The scan is not registered at all in fact it is just in the interface user of Windows Fax and Scan... double you click it, and then it shows you the image.

  Some information note for helping people answer this question (and any help is appreciated):

  (1) * YES * the network folder, I am trying to record is a valid network folder and * IS * accessible via my network of different devices

  (2) * YES * the user of this journal on the computer with the scanner * ALL * read/write to have rights to this location of the network folder

  (3) * file YES and printing sharing is already active on clients

  If you please if someone either knows how to solve this problem, or at this stage if you can even suggest a different (cheaper the better) application that will scan to a network location please let me know.

  One might think to a disabled feature labeled as "scan routing" and then a field for "network location", it would be simple as plugging in the network folder and checking a box - apparently it isn't.

  Thank you.

  Tom Salvtti

  Hi Tom,

  Thanks for posting your query on the Microsoft Community.

  I would like to know some information.

  1. You are connected to a domain network?

  If Yes, then I suggest you to post your query on TechNet Forums as we have experts working on such issues and help you to the best.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How can I save the fax number of faxes sent in Windows Fax and Scan?

  Hello

  I sent a large number of faxes to my clients, (almost 3,000 faxes).

  But unfortunately, many fax numbers seem s be valid noy more.

  I want to save faxes (number, date sent, etc. like in excel tabel) but I do not know how?

  Is a way to save faxes sent in an Excel file?

  Thank you

  Richard

  Hello

  Unfortunately, the feature you are looking for is not available in Windows Fax and Scan. However, you can use your favorite search engine and look for a similar software that meets your need.

• How to MOVE the default location of Windows Fax and Scan?

  We have recently added a second server (Windows Server 2008) to a domain AD., because the new server has more resources, we moved all the DOCUMENTS folder to users from the server (Server 2003) network share to address liked to a share on the new Server 2008 machine. After the move, all Windows 7 machines runs the utility of fax and scan can not find MANY DOCUMENTS folder as the utility constantly points to the old server (which took the OLD action of document already deleted).

  I changed the location of DOCUMENTS in Windows 7 for Server 2008 sharing, but Fax and Scan keeps searching for the old stock 2003 server and I cannot find where to redirect them. Can I turn off Windows fax and analysis services to the title of printing and scanning and then restore? That will allow me to redirect to the correct folder? I have tried even to search the registry for references to the old stock but still can't seem to locate the old server to the MANY DOCUMENTS reference.

  Can anyone help?

  Russ Foszcz

  I solved this problem with a synlink

  First to find the actual location of Library/Documents/scanned documents, make this scanned Documents to right click and click 'open file location '.

  In my case he opened it (that I copied from the address bar):

  Documents C:\Users\Tim\Documents\Scanned

  What should I do now is to save the files in this folder, and then delete the "Documents" folder completely

  Then click the windows key and type in run or search (or click the Windows key + R) and type 'cmd' and press enter

  A black console should appear

  In it, you must enter this command, I wanted that my scans to record in X:\Scans

  MKLINK /j "C:\Users\Tim\Documents\Scanned Documents" X:\Scans

  then press enter

  This creates a folder (symlink, not a shortcut), who acts as a normal file, but is actually located in a different place, so when the scan software saves files in its default location will be actually stored in X:\Scans

• Help with registration of the PDF when using Windows Fax and Scan

  When I use the Windows Fax and Scan, I'm trying to scan a document and then save it as a PDF file.  What happens is when I save it, it opens Adope Photo Shop and will not let me save it as a PDF.  How can I scan a document and then save it as a PDF in Windows 7.0?

  If you have Word 2007 or later, you can scan it, then save it as a PDF. Works fine for me. I have a Canon LIDE 100 scanner, I bought for $50, which will also scan directly to PDF.

  I hope this helps. Good luck.

• Scanner does not scan the using Windows fax and scan

  Hello

  I just bought a new PC Toshiba [win 7 Professional].

  The fax from Windows and research, who settled, scanning a single page as separate 3 files - he never analyzed correctly.

  My other PC [Win7] using Windows fax and scan is not this problem using the same scanner.

  Any ideas?

  I look forward to your response,

  Peter M2201

  Dear Palcouk

  Thank you for your reply,

  Before I tried your suggestion that looked very useful, I thought I would try first to upgrade the software.

  I checked for an update of the MS driver, found an and on installation, the problem is solved.

  Thank you for your suggestion and effort,

  Kind regards

  Peter2201

• Windows fax and scan save them in PDF format

  Original title - Windows fax and scan

  Forced to use the fax windows and scan instead of the HP Toolbox and cannot save a scanned as pdf document. Product of much less than the HP Toolbox. Any plans for windows of difficulty?

  Scanning to PDF is an advanced feature of the HP drivers / software.  Unfortunately, HP has judge do not allow this for your printer.

  You might be able to use the Windows fax and scan can install a "print to PDF".

• Problem with Windows Fax and Scan does not connect to the Internal Modem

  Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

  If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

  While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

  If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

  I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

  Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

  Sorry about that.

  Here is the link:

  http://social.msdn.Microsoft.com/forums/en-us/windowscompatibility/thread/c75ae899-D05B-411D-a7f2-00fdd33b8589/

• remove 1 fax number from outlook to use the Windows fax and scan

  I recently bought a new computer with Windows 7 operating system.  I try to use Windows Fax and Scan to send a fax using my Outlook address book fax numbers.  When I enter the phone number in Outlook it shows as (281) 555-1212.  However, it converts the number of + 1 for each entry, regardless of how I implemented the rules of numbering or not.  Then when I try to fax, I don't need + 1 to dial numbers, only the area code and the number.  I can't do the 1 = go away.  If I dial the number directly in the Fax Wizard, and then it composes correctly, but when pulling starting from Outlook address book that's messed up.

  Basically, I don't have the + 1 to dial local numbers.  Only the 10 digits.  When I get a fax in Outlook number, it automatically formats it with the front 1.  I found an article online that said that if I put a comma before the number to 10 digits, it forces the computer to dial only the numbers that I entered.  It works fine when I do that, then my problem is solved.  Thanks for responding.

• Windows FAX and SCAN error reports - request server name. How to find the server name?

  How can I find the name of the server to send e-mail using Windows FAX and SCAN.

  Hi DonaldCombes,

  1. are you able to use it earlier?
  2. What is the exact error message you get?
  3. don't you make changes occur the computer before the show?

  Try to use the full name of your Pc name of the server.

  Configure your computer to send and receive faxes
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-computer-to-send-and-receive-faxes

  Solve fax problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems

• Windows Fax and Scan-do can't fax any type of attachment "the message could not be sent. These data are incorrect. »

  Original title: Windows Fax and Scan is unable to fax any type of attachment

  I am trying to send a PDF using Windows Fax and Scan Ver 6 Build 6002 SP2.
  I get "the message could not be sent.  These data are incorrect. »
  I can send a cover sheet, or something typed into the dialog box, so the modem works fine.
  The problem is with an attachment to a fax.  Tried to PDF, DOC, ZIP, JPEG, and TIFF.
  I found lots of posts with the same problem, but no solutions or problem.

  Windows Vista Business SP2, Adobe Acrobat 9 Pro using

  Just ran the SFC system (C:\windows\systems32\sfc/scannow) and repair files corrrupt.  WF & S now works well when you attach files.