Windows Fax and Scan "Sender Name" empty (Windows Server 2008 Standard)
Hi all
I am using Windows Server 2008 Standard (32-bit) with a RocketModem III card. I have the latest drivers for the RocketModem.
Using Windows Fax and Scan, I can send and receive faxes fine. The only problem is when I see the fax, the name of the sender is blank. I am trying to display the telephone number that someone sends me the fax to.
I had thought it might also be under CSID, but everything I have complete options because it puts there. I guess that means I want the CSID show for all those who sent faxes to me.
It might be worth noting that I have active CallerID and you have a real fax machine that shows the incoming number very well.
Does anyone have an idea where I could go wrong here? Thanks in advance for the help!
This issue is beyond the scope of this site and must be placed on Technet or MSDN
Tags: Windows
Similar Questions
-
MMC.exe APPCRASH
When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get the error message below. Kindly help
Problem event name: APPCRASH
Application name: mmc.exe
Application version: 6.0.6001.18000
Application timestamp: 47918d 09
Fault Module name: KseAdm.dll
Fault Module Version: 6.0.1262.1064
Timestamp of Module error: 49426cbb
Exception code: c0000005
Exception offset: 0004 849 d
OS version: 6.0.6001.2.1.0.272.7
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
Uninstall windows server 2008 standard and return to my windows 7
I installed windows server 2008 standard for learning purposes, and now I want to go back to my windows 7 please help me to do it, I have no idea how do please help me
Hello
See the following TechNet article:
Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
If the given article is not enough, you can post the question in the TechNet Forums.
Here is the link: http://social.technet.microsoft.com/Forums/en-US/winservergen/threads
-
Original title: iso to wim
I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.
Thank you
Because you are dealing with Windows Server 2008, I suggest that you go on the TechNet forums and re after your question here. They are better equipped to help you with questions regarding the problems of Windows Server.
Thank you! -
Dear Sir
I have windows server 2008 standard Edition, but we want to upgrade to Enterprise Edition and save old licenses to other servers how do I do this ActionThank you in advance
Hello
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Windows server 2008 standard r2 build 7601 this copy of windows is not genuine
I ran windows update to my server and all of a sudden after rebooting I get the following message; "windows server 2008 standard r2 build 7601 this copy of windows is not genuine".
Windows has activated before, so I am quite confused and now I don't have access to all applications on the server.Hello relayed,
The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
TechNet - Windows Server
Thank you -
We are facing problems of physical memory to the hp Server model: HP Proliant ML350G6 with windows server 2008 standard 32-bit.
The memory of the system installled is 22 gb but showing physical memory is 4095 MB only.pls give me the solution for this.* original title - NOT of the PHYSICAL MEMORY MONTRANT CORRECTLY *.
According to this the max is 4 GB for this version and 32 GB for 64-bit. You need to install 64-bit
-
Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?
Thank you
TonyOriginal title: windows server 2008 key
Hello
Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:
http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .
Thank you.
-
Dell Standard ISO for Windows Server 2008 Standard (not R2)
I need an ISO standard, an ISO of Windows Server 2008 Standard OEM Dell 1-4 CPU. I already have a certificate of authenticity available with the P73-04001 product number. Any help would be appreciated. This isn't a request for pirated software, this is a request for ISO itself so that I can use the certificate of authenticity I brandished in the hand. Any help would be greatly appreciated.
Contact Dell for ISO OEM.
-
Downgrade from Windows Server 2008 R2 Standard for Windows Server 2008 Standard
How can I make the downgrade of the Windows Server 2008 R2 Standard to Windows Server 2008 Standard?
I know that the Server 2008 R2 is only x 64, but I need Server 2008 x 86, it's because I need the downgrade.
Does anyone know the correct procedure to do this, or some e-mail to contact someone from Microsoft that could help me?
Thanks for help
Best regards
Support is located in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?
I have a setting wrong?I can't find a setting that relates to this in either Terminal Server Config or Terminal Server Manager...Any help would be much appreciated.Hi Richard,
Thanks for posting your question on Microsoft Community!
I suggest you to ask your question in the section service Terminal Server TechNet forums for assistance.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
I hope this helps.
-
RDP port not listening in Windows Server 2008 standard with Sp2
Hi all
I have Windows 2008 Server Std SP2 Domain Member Server... Since week last sur-quartiers, am not able to take remote control of desktop... But I can't able to Ping on my network server... I have check the setting remotely on the server... It is activated... and also the desktop remotely (Terminal Services) service was launched with success... I checked my firewall to network for blocking port (3389)... But there is not a lot of block in my network firewall... I also disabled windows firewall on my server... But still, I could not able to RDP... I have also checked my settings in domain GPOS and GPO Local for RDP block... But there is no such active parameters. I did following the troubleshooting steps, but still the problem persists1 Telnet IP_serveur 3389Result: Failed to open connection to the host, on port 3389:2. netstat - n - a o | find "3389" (i run this command in my server RDP problem)Result: nothing displayed (port 3389 are not)3 I again & again restarted the server and the Terminal Server service, but there is still problem4.i change the RDP port only and restarted the service so that the server, but still problem exists5. I checked all RDP associated registry settings, everything is perfectPlease help me solve this problemI need your urgent response preciousThanks in advanceHello Sheik
Thank you for visiting the Microsoft Answers site.
The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
-
Windows Server 2008 standard R2 with Exchange server 2010
Hello
I have an old server that has been removed from the network that it was used for active domains (domain controller) and emails,
A new server (Windows Server 2012) took his place with a new address ip and domain name for every pc.
I would like to return the 2008 server in the network so I can continue to use exchange as your e-mail server server.
How to 'reset' the server so I can put in the new network, using the new domain controller and damain network and have the old server as the e-mail server.
Does anyone have instructions step by step on how to do it, or can give me a link on how to do it.
Thank you.
Hello
Support for Windows Server/Exchange Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:
http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .
or, possibly,.
http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer
Thank you. :)
-
Hi This is my first time to ask a question here, in this community.
I'm a sysadmin here at my job and we have some problems on some servers that we are dealing with. Network in our office is stable and we have determined that this is not a problem on the connection.
- First number - one of our domain controller constantly falls on our directory server and saying that it is not available.
- Second edition - unable to ping hostname but IP address works very well. (Sometimes the host name is ok, but very intermittent)
- Third question - connection is unstable card readers causes disconnect
If anyone can provide any assistance in this respect, it would be a great help.
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Number of concurrent connections to remote desktop on Windows Server 2008 and 2012
Dear,
Can someone help me with what is the maximum number of concurrent connections on Windows Server 2008 (Standard & Enterprise) and Windows Server 2012 as well.
Kind regards
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Maybe you are looking for
-
Firefox 42.0 automatically load a tab 'option' as if a Web site is selected. How can I fix it? I can't find any navigation to prevent that from happening. This started when "ask.com" hijacked my browser. I can now load my selected home page, but can
-
Can some help? My Mac continues to beach ball. Here is my report of being: I copied details of Kernel Panic at the end of the report. EtreCheck version: 2.9.13 (267) Report generated 2016-07-30 12:50:59 Download EtreCheck from https://etrecheck.com T
-
I can't uninstall spyware doctor
I try to install the system suite 11 to repair and clean my pc and it wont let me install because it says that I need to remove spyware doctor and I can't find the spyware doctor™ anywhere on my computer
-
Yesterday I moved a movie file video of my D: drive on drive C: (the two C & D are my partitioned hard drive), but shortly after I moved, my laptop becomes unresponsive, then, a pop-up window will appear and say: 'Windows Explorer does not work, the
-
BlackBerry smartphone trackball in bold. Help, please
Hi all Mine won't scroll upward. I had the phone for 6 days (it was a replacement). I took batery out, soft and tried recipes "recycling the ball" as mentioned in a few posts. I would like in ball and move toward its does not work, so I tried the