Windows Firewall and Mcafee won't work?

Similar Questions

• I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know

  If you date something on it so that it remains not.

  I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  Hey Roscoe,

  If you're still using MSE, I doubt there's this problem.  This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that.  It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software.  I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.

  For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you.  You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject.  Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.

  I hope this helps.

  Good luck!

• Windows Firewall and Norton 360

  I just installed Windows 10 on my computer and have also installed Norton. I get a notification saying that the Windows Firewall is disabled but when I go to turn it on it won't let me and says that Norton that she manages. Norton Firewall is enabled. Does this mean that I can ignore the Windows Firewall and will continue to be protected using Norton Firewall? Is it true that Norton just disables the Windows Firewall and takes over? A bit confused because it's happened on Windows 8.

  Thanks :)

  Your best bet is to contact Symantec.  Your version may even not be Windows compatible, 10.

• Tried most methods still Cant turn on the windows firewall and windows defender

  k... I tried a few methods now to go into services and in the confirmation of order... Security Windows won't let me turn on the firewall or Defender on vista Basic... hit me with a message saying due to a firewall problem undefined caanot screen settings... This seems very serious please help

  Original title: tried most methods still Cant turn on the windows firewall and windows defender... sounds SERIOUS! Help

  An Antivirus is a fundamental need for security to prevent malware being installed.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  For an Antivirus, install one of these free AVs (installation more than it will cause problems).

  And first of all remove any AVs expired may still have installed:

  Microsoft Security Essentials:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Avast Antivirus:

  http://www.avast.com/free-antivirus-download#TAB4

  See you soon.

• Windows Firewall and Security Center will not start, error 1068 and 1079

  I can't start my firewall Windows, error: 1079... or Security Center, error: 1068. Can help you with this question? When I try to access the Dependencies tab I get this error: Win 32: the specefied for this service is different from the specefied to account for other services running in the same process.

  I checked to see if dependencies were the same account before I got the message of 'Win 32' and WMI Service runs in the same account (Local Service) as firewall and Security Center, but the RPC Service is running on the Network Service account and cannot be changed via the services console, because the account fields are gray and cannot be viewed or modified. I try to avoid using the tool 'SubInACL' because I don't want to reset the whole registry.

  Help, please!

  The other post:

  I had a problem with obtaining the Windows Firewall and Security Center to start. Service account permissions have been changed at some point, including the depedencies. I get the error 1079 on the Windows Firewall and 1068 on the Security Center. Both are defined on the Local Service, but dependence, the CPP is set to Network Service and cannot be changed because the user fields are gray. I try to avoid using the SubInACL.exe because I don't want to reset the whole registry. Can you help me please?

  No, I'm not on a domain. I connect via a open wireless "hotspot". My main problem is; I don't have a Firewall or Security Center. Nor will begin. I get the error: 1068, to Security Center and an error: 1079 on Windows Firewall. When I try to access the dependencies on either I get this window:

  WIN 32: The account specified for this service is different from the account specified for other services running in the same process.

  A month ago I made the mistake of trying to brand of ACDSee of security, "ACDOne" which includes software "BitDefender". That's when I lost my firewall and Security Center. BIG MISTAKE! I uninstalled and deleted all the files that I found that have been left.

  My Security Essentials and Windows Defender work very well. I'm stuck and need help with this please! Please, I beg you! Someone... Help!

  The system cannot find the specified file.

  http://support.Microsoft.com/kb/947821>

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the updates.

  UTC/GMT is 02:51 Wednesday, April 25, 2012

• I changed my Zonealarm firewall Windows Firewall and now I can't access certain websites that I usually visit

  I changed my Zonealarm firewall Windows Firewall and now I can't access certain sites that are kept in my favorites, I used to visit including some Microsoft, MSN and a few others which it (using another PC for that) the sites that I'm trying to access right will keep showing that the connection but I can go to my favorites and connect to others of the opened page. Someone at - it ideas, what could have changed? I'm also using Microsoft Essentials.

  Sorted! ... the problem is my Belkin PCI card was a snap after use some 8 years and I am connected through my wireless alternative D - Link DWL-122 USB adapter and it has been/is somehow stop Adobe Flash to run, so any site, I have tried to connect to Flash content does not open. I tried the Belkin and it let me straight on any site I wanted.

  Hope this helps others as it isn't always down for a team of software.

• I wonder constantly to turn my Windows Firewall and change its settings.

  I wonder constantly to turn my Windows Firewall and change its settings.

  OK, I'm sure that there is an issue somewhere in there.

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Running Windows Defender and McAfee at the same time will cause performance problems?

  Will be running Windows Defender and McAfee Antivirus at the same time slow down my laptop, and it is necessary to run both at the same time.  I have windows vista.

  Hello

  McAfee is normally disable windows defender

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  for a good anti-malware program try this FREE

  Download update and scan with the free malwarebytes anti-malware version

  http://www.Malwarebytes.org/MBAM.php

• Webcam CNF7051 toshiba laptop; I installed windows 7 and webcam has never worked since.

  I installed windows 7 and webcam has never worked since. What is the solution for this problem?

  Hello

  Since you upgraded to Windows 7 have you run Upgrade Advisor and verify with the
  Compatibility Center (for the compatibility of the device)?

  Windows 7 Upgrade Advisor <-- please="" run="" this=""> http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

  Also check the Compatibility Center (for the compatibility of the device)?
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Check with the system and peripheral manufacturers for updated drivers and many have special
  instructions to help the upgrade to Windows 7. You should also check with the system
  Machine to ask in their forums (if any) for known problems and solutions and support.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ==============================================================

  If the system is compatible Windows 7 AND there are drivers for your WebCam
  (and other devices).
  
  Vista references apply to Windows 7.

  You probably need to reload the drivers of the device and the camera'IF' control software
  There is for Windows 7.

  Login as an administrator.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
  Click on it and on the tab of the driver is version. Now, click on update drivers (who cannot do anything
  that MS is far behind the drivers of certification). The RIGHT CLICK on the camera - UNINSTALL-
  REBOOT - it will refresh the driver stack.

  Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
  the camera software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ==============================================================

  If there are no Windows 7 drivers:
  
  You can try loading the latest driver available in Compatibility Mode which sometimes
  work however, it isn't anywhere near a sure thing.

  Exhausted all other methods in the Troubleshoot utility above before trying these.

  Logon as ADMINISTRATOR for all of them.

  You can try Compatibility Mode but this rarely works on the device drivers.

  Right click on the driver executable (.exe) file - select Compatibility Mode

  In the drop-down menu choose XP or Vista and Service Pack (if it is the version
  "you try the drivers).

  Click OK, and then let the race to see if it will install.

  =================================================

  It also rarely works on the device drivers but it is worth trying:

  Another method to try is to run the .exe (if self extraction) or Unzip (if it is compressed) to a folder:

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  Open an elevated command prompt : (probably looks like this)

  C:\Windows\System32 >

  CD \the path to this folder as C:\User\Your user Name\Camera_Folder or something else
  the path is the folder where the driver is unpacked.

  So in this case it would be \User\Your User Name\Camera_Folder CD and the prompt
  look like:

  CD \User\Your user Name\Camera_Folder >

  This in type at the prompt and press ENTER.

  -I - one *.inf PnPUtil

  It will take a little time to respond.

  If it does not (error) use the full path to the driver, for example (which can be used
  any guest):

  PnPUtil-i - one C:\User\Your user Name\Camera_Folder\*.inf

  Still wait to see if it will install.

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  The PnPUtil command syntax
  http://msdn.Microsoft.com/en-us/library/ff550423 (vs.85) .aspx

  PnPUtil.exe - operating instructions
  https://www.faultwire.com/file_detail/PnPUtil.exe * 28200.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Firewall and Windows Security Center cannot start. In addition, no WSC in the services.msc list. What should do?

  Hey guys. I looked up and down for a solution to this problem.

  I already tried this solution:

  http://blogs.technet.com/b/asiasupp/archive/2011/12/27/error-code-0x80070424-with-Windows-Firewall-and-quot-base-filtering-engine-service-quot-not-available-in-services-database-list.aspx

  Although the only problem is at last step when I turn on the firewall Windows or WSC (windows Security Center) since neither of them are present
  in the list of the services.msc.

  So here I am without any windows security, no firewall and no updates. I really need help here. I was attacked by malware, a day ago, and everything happened after that. I removed the malware with program ESET NOD, but it seems that the malware corrupted my registry/safety inputs.

  Thanks in advance.

  Hello

  I suggest you run both the fix that he mentioned below and check if it helps!

  · Resolve security issues to protect and secure Windows automatically

  · Automatically repair the settings of Windows security to secure your PC

  I hope that helps!

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I could not turn it off on m

  I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I couldn't turn it off on my computer due to the fact that it broke down.

  The serial number you have is a Volume License serial number, which works only with the specific volume license Installer. Please visit the Adobe license | Serial numbers | Orders | Accounts.

  I hope this helps.

• I want to upgrade to 10 windows, photoshop and Lightroom cc 2015 work properly?

  I want to upgrade to 10 windows, photoshop and Lightroom cc 2015 work properly?

  Cloud and Windows 10 https://forums.adobe.com/thread/1912621

• Photosmart C4580 installed on Windows 7 Ultimate and it won't work!

  Software installed on Windows 7 Ultimate and I can do everything except printing! When I ask for an example, I see a blank page and the printer does not print. All downloaded from the HP site and I'm tired of installing the update (CPE_SLP_NETWORKMSI_hpcom_000_006) because I don't think it's the solution because I tried several times and now I installed a version of Windows for the fourth time and I won't do it again. Can someone please help?

  With the help of HP customer care, I solved the problem! Problem is that the new installation of Microsoft was not correct. I never formatted the disk before the installation of new, and that was the problem. Thanks for the support!

• Windows Firewall and internet connection failure

  My Wi-wired connections and no longer work. My window firewall won't start. I now have a message to "svchost.exe. startuo - Application error The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory cannot be: "read" "Any ideas how to solve this problem?

  Hello

  Thanks for choosing Microsoft Community Forums.

  According to the description, it seems like you get an error message "svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory could not be read. I'll be happy to help you with this problem.

  (1) when exactly you receive this error message?

  (2) have you made changes on the computer before this problem?

  I suggest you follow the steps to disable Windows Driver Foundation - User - mode Driver Framework and check if it works.

  (a) click Start and select run.

  (b) type services.msc and press enter.

  (c) search for Windows Driver Foundation - User - mode Driver Framework serviceright click Choose Properties in the Startup type and then select disabled.

  (d) to restart the computer.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.