Windows Firewall and Security Center will not start, error 1068 and 1079

I can't start my firewall Windows, error: 1079... or Security Center, error: 1068. Can help you with this question? When I try to access the Dependencies tab I get this error: Win 32: the specefied for this service is different from the specefied to account for other services running in the same process.

I checked to see if dependencies were the same account before I got the message of 'Win 32' and WMI Service runs in the same account (Local Service) as firewall and Security Center, but the RPC Service is running on the Network Service account and cannot be changed via the services console, because the account fields are gray and cannot be viewed or modified. I try to avoid using the tool 'SubInACL' because I don't want to reset the whole registry.

Help, please!

The other post:

I had a problem with obtaining the Windows Firewall and Security Center to start. Service account permissions have been changed at some point, including the depedencies. I get the error 1079 on the Windows Firewall and 1068 on the Security Center. Both are defined on the Local Service, but dependence, the CPP is set to Network Service and cannot be changed because the user fields are gray. I try to avoid using the SubInACL.exe because I don't want to reset the whole registry. Can you help me please?

No, I'm not on a domain. I connect via a open wireless "hotspot". My main problem is; I don't have a Firewall or Security Center. Nor will begin. I get the error: 1068, to Security Center and an error: 1079 on Windows Firewall. When I try to access the dependencies on either I get this window:

WIN 32: The account specified for this service is different from the account specified for other services running in the same process.

A month ago I made the mistake of trying to brand of ACDSee of security, "ACDOne" which includes software "BitDefender". That's when I lost my firewall and Security Center. BIG MISTAKE! I uninstalled and deleted all the files that I found that have been left.

My Security Essentials and Windows Defender work very well. I'm stuck and need help with this please! Please, I beg you! Someone... Help!

The system cannot find the specified file.

http://support.Microsoft.com/kb/947821>

After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the updates.

UTC/GMT is 02:51 Wednesday, April 25, 2012

Tags: Windows

Similar Questions

  • Help... MSSE, and Security Center will not start... ?

    Security services will not start at all, just stay off... Is this a virus... ?

    1. research of virus with MBAM and McAfee...

    2 restart disabled services, but 5 seconds later they turn off automatically...
    3. update system...
    4 checked registry...
    5. now receive error message - "code 1058 '...
    S ' PLEASE HELP... Thank you...

    Hi SirSmythikus,

    Check to see if this article helps you.

    Service starts not and displays "Error 1058"

  • Security Center will not start.

    I don't know how long it has been so, but I noticed yessterday that the Security Center does not illuminate.

    No will the firewall or the Defender.

    I ran Malaware and Spybot, and moy. Nothing showed except for some tracking cookies, but nothing major.

    I've ran out of ideas and really don't want to have to do a complete reset to original.

    Can someone please help with some ideas of what either elsed I can try.

    Thank you in advance.

    Hello
    Follow these instructions to fix the Windows Firewall:
    Download and install Windows Repair:
    When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
    -Reset the registry permissions
    -Reset the permissions of files
    -WMI repair
    -Repair Windows Firewall
    Then click on start. Once it is finished, restart your computer. Let me know if this helps you.
    Brian
  • XP SP3 Security Center will not suddenly Norton Internet Security recognize?

    Windows XP SP3 Security Center won't recognize all of a sudden of Norton Internet Security. It has been fine for years. I don't have a virus.

    How to fix problem?

    Hi Chris,

    Thanks for posting your question in the Microsoft Community forum. I understand that XP SP3 Security Center will not recognize Norton Internet Security. I would like to help solve you the problem.

    This problem may occur if there is an inconsistency in the system files or folders associated with XP Security Center. Follow these methods:

    Method 1.

    Disable the firewall and check if that helps.

    How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions? : http://support.microsoft.com/kb/283673

    Note: you should not disable Windows Firewall, unless you have another firewall is activated. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

    Method 2.

    Rename the storage folder.

    1 - Go to control panel, and then open administrative tools.

    2 - click on Services.

    3-go down to Windows Management Instrumentation and stop this service.

    4. stop the Security Center service.

    5-exit and close all windows.

    6. right click on start and select explore.

    7. go down to C:\windows or Winnt\system32\wbem\repository.

    8 remove only the storage folder

    9-go Back To Services and restart the WMI and the Security Center service.

    10. close all windows and restart the computer.

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

    For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

    Hello

    1. this problem occurs only with this particular update?

    2 did you change on your computer before this problem?

    You can follow the suggestions and check out them.

    Method 1

    You can reset the Windows Update components.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

    How to back up and restore the registry in Windows XP

    http://support.Microsoft.com/kb/322756

    Method 2

    You can read the article.

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

    How to back up and restore the registry in Windows XP

    http://support.Microsoft.com/kb/322756

    Method 3

    Step 1:

    Place the computer in a clean boot state.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

    a. click Startand then click run.

    b. type msconfigand click OK.
    The System Configuration utility dialog box appears.

    c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

    When you are prompted, click restart to restart the computer.


    Step 2:

    Download and install the update from the link.

    Update security for Windows XP (KB2719985)

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

    See also:

    Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

    http://support.Microsoft.com/kb/906602

  • For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

    For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

    Help, please

    Thank you

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • For Windows XP (KB2686509) security update will not install

    I've got 5 responses within 24 hours with the same question - after download from Microsoft Update for Windows XP (KB2686509) security update will not install - be what I need to do? Microsoft will pay attention and come up with a solution?  Anyone know how to reach and motivate the MS to help?

    See:

  • I can't turn on my firewall. My Security Center will not display informfation on the firewall

    We had malware on the computer, but deleted. Since this incident, I was unable to turn on the firewall and Security Center does not have information on the firewall. I've deleted and reinstalled security essesntials but it has no effect on the problem

    Hello
     
    Please follow the links below to solve the problem.
     
    Method 1
     
    You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2
     
     
    Method 2
     
    Diagnose and automatically fix problems of Windows Firewall service
     
    See also,
     
    How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
     
     
    How to recover from an infection of computer virus and how to prevent future infections from computer viruses in Windows operating systems
     
     
    I hope this helps.
  • Windows Security Center will not respond, disabled Malwear cant turn it on?

    as mentioned above the screen of my computer kept going as well until I did a scan now that's fine. but the Security Center does not always react and my computer keeps freezing. I have avg that works very well.

    Hi Dar311,

    1. don't you make changes before the show?

    Step 1: Virus scanner online
    a. visit http://onecare.live.com/site/en-us/center/whatsnew.htm
    b. click "full service scan.
    c. scan the computer and remove the infected files.

    Step 2: Run SFC (System File Checker) scan to find and repair missing or corrupt system files and check the result. To do this, try the following steps:
    a. visit http://support.microsoft.com/kb/929833
    b. run the scan successfully.
    c. restart the computer so that the changes take effect and check the result.

    Step 3: Check if a non-Microsoft program is at the origin of the problem
    a. open the article: http://support.microsoft.com/kb/929135
    b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
    c. check to see if the problem persists.
    d. If the problem does not persist in the boot, it means that another non-Microsoft program is causing the problem.
    e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
    f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
    g. Article, follow "step 7: reset the computer to start as usual.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • DeskJet F2480: 10 Windows upgrade now solution Center will not launch

    Since the upgrade to win 10, the F2480 prints and scans by using the built-in windows scan software. The printer is USB connected. The HP Solution Center software will not start. Uninstalled and reinstalled with software downloaded from AIO_CDB_Net_Full_Win_WW_140_408 - 5.exe HP.

    Is it installed then when check USB it does not find the printer. Device Manager sees and scan OK. Where to go from here. ?

    Hello

    Appears from the description that the full features software is not installed.

    Can you download from this link and try to install again?

    http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-F2400-all-in-one-series/3811093/model/3811136#Z7_3054ICK0K8UDA0AQC11TA930O2

    Hope that helps.

    Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

  • I can't download anything or put the Windows Firewall or security center

    Everything I try to download comes with the "(program/filename) message contained a virus and was eliminated", also I can not turn on Windows Security center, firewall (I don't have Norton Firewall, but even if I turn away again cannot activate Windows). " I can't download "fixes" for the same reason? Everything else works fine on the computer (internet, e-mail, etc.). ... Windows 7 is what is installed. Thanks in advance for any help

    Hello Sean,.

    Thank you for your response.

    I appreciate your time.

    Have you tried to download files to scan on another Microsoft computer security as stated in the previous post?

    As you mentioned that Windows Security Center is not present in the services, I suggest you run the System File Checker to correct missing or damaged Windows file.
    Refer to this article:
    Use the System File Checker tool to repair missing or corrupted system files
    https://support.Microsoft.com/kb/929833

    System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

    To the 0 x error 80070424 Windows Firewall, run this Microsoft fixit and check the issue.
    Reference:
    Diagnose and automatically fix problems of Windows Firewall service
    http://support.Microsoft.com/mats/windows_firewall_diagnostic

    Please keep us updated on the status of the issue.

    Thank you

  • Security Center will not open

    Hello
    I tried to open Security Center, because some of my programs do not work to find that they're not because the Security Center does not work, the message I got was C:/WINDOWS/system32/shell32.dll,CONTROL_RunDLL C:/WINDOW/system32/wscui.cpl someone please help
    Thank you

    Hello

    1. when the question is is produced?

    2. you remember of any change to your computer before the problem?

    I would have you run SFC scan to fix this problem.

    Aziz nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Windows Firewall and Security Center will not be open - Application not found

    When I right click on my computer then properties, I get an error message "Application not found c:/windows\system32\rundl32.exe.

    In Control Panel, when I click on the Security center and windows firewall, I get the same thing.

    In the past, when I click on the above, the properties come with several tabs and the info on my computer and the firewall came to show if it is on or off.

    I recently downloaded by Comcast Norton Security Suite. I don't know if this happened before or after that.

    Also, I had something like 'XP Active something' burst by saying I had someone trying to hack into my computer and I might have a virus and run a scan now that I did. He came in saying that a list of things have been found and set up a page where I can buy protection for $59.99 per year. I did that and I who sold his to run a scan with Norton. It showed that she had blocked a Trojan horse and had several blocks of attempts to access my computer.

    Can someone please tell me what to do? I am not very computer English savvy, so simple and clear please.

    Thank you!

    Hi, it seems that you have an infection of malicious software on your computer, the best way is to run the Security Scanner

    just to go to http://safety.live.com and run a full scan service.

    Info on how to make it work just watch this tutorial

    http://www.YouTube.com/watch?v=NgH43lmxl-Y

    answer please if you have a problem

  • Windows Security Center does not start

    A few weeks ago, my laptop was hit with a horse of Trojan Zero access/Siref. I was able to remove with HitMan Pro, but I have, since then, failed to start the Windows Security Center.

    I use Windows 7.

    3 import this file into the registry:

    Download and apply this REG fix that restores the missing Security Center service:

    http://www.Winhelponline.com/temp/W7-wscsvc.zip

    Note: It is http://www.winhelponline.com/blog/misc-registry-fixes-for-windows-7-xp-vista/ and is only for Windows7.

    Courtesy: URL posted by the ball.

  • Windows Security Center will not be on

    Original title: windows Security Center

    Windows Security Center can't turn on, it lights up!

    Hello

    ·         What is the error message you get when you start the windows Security Center?

    Step 1: Start the Microsoft Fix It: http://support.microsoft.com/mats/windows_security_diagnostic/en-us?entrypoint=lightbox

    Step 2: Check services.

    a. Start button > in the search box, type Services and press enter

    b. scroll to find the Security Center, click on it

    c. topic status, we should have started and the Startup Type, it must be said, automatic

    d. If she doesn't say it, right click on the Security Center > click on properties of Startup Type, click on the pointer to the right and select Automatic (delayed start)

    e. the service status, click Start

    f. click OK when finished.

    See alsohttp://social.answers.microsoft.com/Forums/en-US/w7security/thread/d8250e7a-ee3c-4302-8ca6-9e2a10262feb

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for