Windows Firewall does not start. Cannot start connection ICS internet sharing service

Similar Questions

• Windows Firewall does not start

  My firewall does not start.  It gives the service specific error code 13.  Tried to manually start the service, no luck.  Also checked the dependencies, all not working no chance. Looking for spyware and viruses.  No luck.  Searched everywhere on the internet solutions and found only dead ends.

  The Windows Firewall service completed with error 13 (0xD) special service.

  Thanks for any help.

  E-mail address is removed from the privacy *.

  Hello Bill,

  Thanks for posting on the Microsoft answers Forum.

  It seems that you have studied this question, but I have a few questions to help you troubleshoot.

  • When the firewall service has failed to start?
  • You have errors in the log of events dealing with the firewall service? Check the system and safety and the Application event log.
  • The Firewall Service is set to automatic? She is arrested or if it is in a State of waiting? Is the journal on the expected system Local?
  • Please check the remote procedure call Service and the Base Filtering Engine Service is started and set to automatic.
  • You have any 3rd party firewall in place in addition to the Windows Firewall?

  Please let me know the results, so I can continue to help you.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my windows firewall does not start and I get a erroe code 5, can someone help me

  my windows firewall does not start and I get a erroe code 5, can someone help me

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

  Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

  Method 2.

  Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

• Windows Firewall does not start I tried many routes to solve this problem, anyone know how to help I did a lot of different types of suggestions that I read on the net, and I'm still having no luck. Please can someone help?

  Anyway I recently installed a Kaspersky Internet Security2010 trail version, I run Windows Vista, my computer is new, I know that there are no viruses, malware or spyware. However, I have this error code 6801, and I can not turn on the windows firewall. This started after I removed the version Kaspersky track. He also tells me that the associated program does not want to start "Yes or no" of course I tried yes then received this error 6801. I goggled the error and tried different ways to fix this error but still no luck. I'm a bit about computers, I checked the services and his here said automatic but not started. Tried again to start manually and this time it is said ' cannot start Firewall Win, if it comes to a product non-windows then contact suppliers and relay the error 6801.» So please if someone knows something I can do to solve this problem I do not have the disk to reboot vista and I'm losing my mind, I was in it for five days and his crazy wife. Another reason, I would like to correct this problem is I can not use my bitcomet torrent Downloader, I think that this problem of firewall is the problem because everything was going well until the Kaspersky was installed and then my router accidentally disconnected. Sorry for the hike, I'm very frustrated. Just for you all also say that I tried to port forward, with and without static ip and now I think I need to do something about this error until I can fix my bitcomet. I hope that someone takes the time to read this and respond, thanks hope someone soon!

  Visit the kasperersky site... they have the solution you need... Read it yesterday...

• After you run the 2011-12-15 updates, Windows Firewall does not start.

  I have my computer set up to run automatically updates. After the last set of updates, I am unable to start Windows Firewall by all means. Service, Mpssvc has an error message "cannot read the description: error code 15100" when I check it in the Services window. I am running Vista Home Premium 64-bit with Service Pack 2 installed.

  I ran the Microsoft Fixit for firewall services and received the message that "Windows Firewall service is not running or is not started. The Fixit was not able to start the firewall and Mpssvc.

  Hello

  -What updates caused the problem to occur?

   
  Updated version has a problem in the history of the update.
   
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  (b) in the left pane, click view update history.
  c. to display more information about an update, double-click it.
   

  Follow these methods and see if the problem still occurs.

  Method 1:

  Do SFC scan and check if the problem is related to the integrity of system files.

  Method 2:

  Do System Restore to the point that your computer worked very well and install updates manually ensuring that do not install the problem causing the update unless it says 'important update '.

• Windows Firewall does not start: error code 0 x 80070437

  I can not start the Windows Firewall on my system.

  When you try to start the firewall I get error code: 0 x 80070437
  During the execution of the services as administrator, the Base filtering engine is started.
  Firewall Windows is not started, but when I start: error 1079: the account specified for this service is different from the account specified for other services running in the same process.
  Authorization of firewall Windows Driver is not present.
  How can I get my firewall?
  Thank you
  Hey Conor,
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• My windows firewall does not start

  When I try to manually start the firewall, I get the following message: "Windows culd not start the widows firewall on local computer.  For more information view the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 5 "specific error code.

  Any Suggestions

  Johnny

  Hi John,.
  Follow these instructions:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let us know if that helps you.
  Brian

• Windows Firewall does not start, and the service is missing

  I'm riunning windows 7 pro (64 bit) when I go to set the default settings of windows firewall, it is said "windows firewall cannot change some of your error code of 0 x 80070424 settings." IM current essential security for the AV. I get to a sirefef. Infection of AB (which has been deleted) but when I look for my firewall service its gon - not here. I tried the Fix - tool and it didn't fix it. Any ideas?

  Tom,

  80070424 means that a required service is not present or running.

  First of all, make sure that all your personal data and program installation files are saved in one location other than your computer, as soon as POSSIBLE.

  What is the installed security/antivirus suite. is it's subscription and current definitions; whatever it has detected the last time that the system has been analyzed with it?

  Please run this tool Kaspersky to see if it is "hid" software malware present - How to remove malware belonging to the family Rootkit.Win32.TDSS

  If TDSSKiller.exe does not detect anything, then suggest you try to download and use thescan of Microsoft Security
  If the safety of MS Scanner cannot be downloaded or run, then try to do a scan online -ESET Online Scanner

  IF you still can not use all that above, then suggest you use another computer to burn a rescue CD which will be that you will be able to your computer so that the hard disk is not active-

  How to create a BitDefender rescue CD
  or
  Kaspersky Rescue Disk 10

  UTC/GMT is 00:11 Sunday, July 22, 2012

• Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

  Windows Vista does not start.  It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow.   Have not the SATA drives connected.  Impossible to get to the command prompt to delete all files.  No work from safe mode.  Restore computer does not work.  I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem.  The computer is less than 2 years.

  Toshiba Satellite A205-S5831, dual processor running.  Running Windows Vista BASIC.  Hard drive seems to work, lighting, well working properly, no error at startup.  No perifpherals or a mouse, or a USB attached.  Disabling USB does not boot.

  Can someone give a help?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• My windows in does not start

  My windows in does not start when I turn on it shows the black screen written as

  A7529IMS V4.1 071009

  PENTIUM DUAL-CORE E5500 @2 PROCESSOR. 80 GHZ

  Frequency DRAM DDR2 (dual channel)

  Initializing USB controllers... Fact

  Press DELETE to enter the Setup menu, F11 to enter the Boot Menu.

  But he's not going after pressing the F11 or DEL even I wait 7 hours.

  So please help me for that operate the window.

  Hello
   
  Thanks for posting your query in Microsoft Community.
   
  I understand from the description of the issue that you are having problems with starting. I'll be happy to help you with this problem.
   
   
  M odes 1: try by selecting disable automatic restart on system failure from the options of start menu advanced to know the error.

  Method 2: Connect the drive hard back and remove non-essential external devices to the computer.

  Method 3:
  Step 1: Check if you can start the computer in safe mode.

  Step 2: If you are able to start and then perform a system restore to the time where you encountered this problem. Check if you can start fine. If so, then log the manufacturer's Web site and install the latest drivers available for the computer, including the chipset drivers.

  Method 4: If you are not able to boot, then try to do a Startup Repair and see if it helps. Also see this articlefor more information.

  Method 5: I suggest update you also the firmaware BIOS from the manufacturer's website and check.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

  Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

  Lately, I'm leaning toward the Hiren's BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the most recent version

  The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

  Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

  If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.

• Windows 7 build in windows game does not start

  Windows 7 build in windows game does not start

  Hello

  ·         What happens when you try to start the game?

  ·         You get the error message?

  Try this:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find the games and place a check in the option of games. Click OK

  d. restart the computer

  For more information, see the article below:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows XP does not start

  Suddenly Windows XP does not start, instead, I get a message that says"

  Type the name of the shell for example, c:\windows\command.com.

  I am able to boot in safe mode but.

  Can anyone suggest what may be the cause of this and especially what should I do?

  Thank you

  Tony

  Thank you, Gerry. But the problem turned out to be a defective drive cable.

  Tony

• Windows xp does not start, I can't even in safe mode. I Mindprint just a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Hello

  1 did you changes to the computer before the show?

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503