Windows Firewall does not start

My firewall does not start.  It gives the service specific error code 13.  Tried to manually start the service, no luck.  Also checked the dependencies, all not working no chance. Looking for spyware and viruses.  No luck.  Searched everywhere on the internet solutions and found only dead ends.

The Windows Firewall service completed with error 13 (0xD) special service.

Thanks for any help.

E-mail address is removed from the privacy *.

Hello Bill,

Thanks for posting on the Microsoft answers Forum.

It seems that you have studied this question, but I have a few questions to help you troubleshoot.

  • When the firewall service has failed to start?
  • You have errors in the log of events dealing with the firewall service? Check the system and safety and the Application event log.
  • The Firewall Service is set to automatic? She is arrested or if it is in a State of waiting? Is the journal on the expected system Local?
  • Please check the remote procedure call Service and the Base Filtering Engine Service is started and set to automatic.
  • You have any 3rd party firewall in place in addition to the Windows Firewall?

Please let me know the results, so I can continue to help you.

Sincerely,

Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Windows Firewall does not start. Cannot start connection ICS internet sharing service

    Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

    Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

  • my windows firewall does not start and I get a erroe code 5, can someone help me

    my windows firewall does not start and I get a erroe code 5, can someone help me

    Hello

    1. What is the brand and model of the computer?

    2. what security software is installed on the computer?

    3. have you made changes on the computer recently?

    Method 1.

    To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

    Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

    Method 2.

    Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

    For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    I hope this helps.

  • Windows Firewall does not start I tried many routes to solve this problem, anyone know how to help I did a lot of different types of suggestions that I read on the net, and I'm still having no luck. Please can someone help?

    Anyway I recently installed a Kaspersky Internet Security2010 trail version, I run Windows Vista, my computer is new, I know that there are no viruses, malware or spyware. However, I have this error code 6801, and I can not turn on the windows firewall. This started after I removed the version Kaspersky track. He also tells me that the associated program does not want to start "Yes or no" of course I tried yes then received this error 6801. I goggled the error and tried different ways to fix this error but still no luck. I'm a bit about computers, I checked the services and his here said automatic but not started. Tried again to start manually and this time it is said ' cannot start Firewall Win, if it comes to a product non-windows then contact suppliers and relay the error 6801.» So please if someone knows something I can do to solve this problem I do not have the disk to reboot vista and I'm losing my mind, I was in it for five days and his crazy wife. Another reason, I would like to correct this problem is I can not use my bitcomet torrent Downloader, I think that this problem of firewall is the problem because everything was going well until the Kaspersky was installed and then my router accidentally disconnected. Sorry for the hike, I'm very frustrated. Just for you all also say that I tried to port forward, with and without static ip and now I think I need to do something about this error until I can fix my bitcomet. I hope that someone takes the time to read this and respond, thanks hope someone soon!

    Visit the kasperersky site... they have the solution you need... Read it yesterday...

  • After you run the 2011-12-15 updates, Windows Firewall does not start.

    I have my computer set up to run automatically updates. After the last set of updates, I am unable to start Windows Firewall by all means. Service, Mpssvc has an error message "cannot read the description: error code 15100" when I check it in the Services window. I am running Vista Home Premium 64-bit with Service Pack 2 installed.

    I ran the Microsoft Fixit for firewall services and received the message that "Windows Firewall service is not running or is not started. The Fixit was not able to start the firewall and Mpssvc.

    Hello

    -What updates caused the problem to occur?

     
    Updated version has a problem in the history of the update.
     
    a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
    (b) in the left pane, click view update history.
    c. to display more information about an update, double-click it.
     

    Follow these methods and see if the problem still occurs.

    Method 1:

    Do SFC scan and check if the problem is related to the integrity of system files.

    Method 2:

    Do System Restore to the point that your computer worked very well and install updates manually ensuring that do not install the problem causing the update unless it says 'important update '.

  • Windows Firewall does not start: error code 0 x 80070437

    I can not start the Windows Firewall on my system.

    When you try to start the firewall I get error code: 0 x 80070437
    During the execution of the services as administrator, the Base filtering engine is started.
    Firewall Windows is not started, but when I start: error 1079: the account specified for this service is different from the account specified for other services running in the same process.
    Authorization of firewall Windows Driver is not present.
    How can I get my firewall?
    Thank you
    Hey Conor,
    Follow these instructions to fix the Windows Firewall:
    Download and install repair Windows: 
    When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
    -Reset the registry permissions
    -Reset the permissions of files
    -WMI repair
    -Repair Windows Firewall
    Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
    Brian
  • My windows firewall does not start

    When I try to manually start the firewall, I get the following message: "Windows culd not start the widows firewall on local computer.  For more information view the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 5 "specific error code.

    Any Suggestions

    Johnny

    Hi John,.
    Follow these instructions:
    Download and install Windows Repair:
    When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
    -Reset the registry permissions
    -Reset the permissions of files
    -WMI repair
    -Repair Windows Firewall
    Then click Start. Once it is finished, restart your computer. Let us know if that helps you.
    Brian
  • Windows Firewall does not start, and the service is missing

    I'm riunning windows 7 pro (64 bit) when I go to set the default settings of windows firewall, it is said "windows firewall cannot change some of your error code of 0 x 80070424 settings." IM current essential security for the AV. I get to a sirefef. Infection of AB (which has been deleted) but when I look for my firewall service its gon - not here. I tried the Fix - tool and it didn't fix it. Any ideas?

    Tom,

    80070424 means that a required service is not present or running.

    First of all, make sure that all your personal data and program installation files are saved in one location other than your computer, as soon as POSSIBLE.

    What is the installed security/antivirus suite. is it's subscription and current definitions; whatever it has detected the last time that the system has been analyzed with it?

    Please run this tool Kaspersky to see if it is "hid" software malware present - How to remove malware belonging to the family Rootkit.Win32.TDSS

    If TDSSKiller.exe does not detect anything, then suggest you try to download and use thescan of Microsoft Security
    If the safety of MS Scanner cannot be downloaded or run, then try to do a scan online -ESET Online Scanner

    IF you still can not use all that above, then suggest you use another computer to burn a rescue CD which will be that you will be able to your computer so that the hard disk is not active-

    How to create a BitDefender rescue CD
    or
    Kaspersky Rescue Disk 10

    UTC/GMT is 00:11 Sunday, July 22, 2012

  • Windows Firewall does not work

    I have windows vista sp2. I also have MS security essentials.

    I don't know why, the windows firewall does not work on my computer.
    I also tried to start from the services application.
    Help, please.
    Thank you
    Follow these instructions to fix the Windows Firewall:
    Download and install repair Windows:
    When the repair of Windows opens, click start repair , click Start. Unselect all the boxes except for the following:
    -Reset the registry permissions
    -WMI repair
    -Repair Windows Firewall
    Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
    Brian
  • Windows Vista does not start - only Safe Mode

    Hello

    Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

    Press F8 all turn the laptop.
    Choose the first option: by computer repair and try to repair the operating system automatically.

  • Windows 7 build in windows game does not start

    Windows 7 build in windows game does not start

    Hello

    ·         What happens when you try to start the game?

    ·         You get the error message?

    Try this:

    a. go to start and in the search type 'Turn Windows has or not'.

    b. click on "Turn Windows features on or off".

    c. find the games and place a check in the option of games. Click OK

    d. restart the computer

    For more information, see the article below:

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows XP does not start

    Suddenly Windows XP does not start, instead, I get a message that says"

    Type the name of the shell for example, c:\windows\command.com.

    I am able to boot in safe mode but.

    Can anyone suggest what may be the cause of this and especially what should I do?

    Thank you

    Tony

    Thank you, Gerry. But the problem turned out to be a defective drive cable.

    Tony

  • Windows xp does not start, I can't even in safe mode. I Mindprint just a black screen with the mouse arrow. What can I do

    Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

    Hello

    1 did you changes to the computer before the show?

    You can try the troubleshooting provided in the link below steps to fix the problem.

    Computer stops responding with a black screen when you start Windows XP

    http://support.Microsoft.com/kb/314503

  • Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

    Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

    You have all the features non-essential related to the machine?
    Have you installed a new hardware or software recently?

    Try to do a repair install and see if it corrects the problem.

    How to perform a Windows XP repair install

  • Please help: Windows XP does not start error message: STOP: 0 x 00000024

    Original title: Please help: Windows XP does not start.

    Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

    If this is the message you get, then you have multiple problems...

    1, xp should be on the C: drive, not F:

    Default C: is for the OS only. With xp on drive F: and you use only a hd

    then the hd must be formatted and all partitions deletion (unless there is a relocation

    the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

    be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

    for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

    Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

    Read kb307654 or kb314058

Maybe you are looking for