Windows firewall stops every time I start my computer.

OT: I have to pass Windows Firewall, every time I start my computer. What is this caused by a virus or a bad setting in Windows?
Whenever I turn on my computer, I check that the Windows Firewall is enabled. It is still off and I have to turn it on.

Hi Tony McLaughlin,.

1. what operating system is installed on the computer?
2. are you aware of any hardware or software changes, prior to the beginning of the question?
3. you have any third-party firewall installed on the computer?

Method 1
The Windows Firewall will close if you have any third-party firewall is running on the computer. I suggest you try the steps from the following link:

Windows Firewall is turned off every time I start my computer
http://TechNet.Microsoft.com/en-us/library/cc749262 (v = ws.10) .aspx

Method 2
To start the Windows Firewall service.
a. Click Start and all programs and type services.msc in the run window and press ENTER.
b. find Windows Firewall services and put him automatically and rstart services and verification.

Additional information:
Security Warning: the Windows Firewall is disabled
http://support.Microsoft.com/kb/2288085

Tags: Windows

Similar Questions

  • cannot access wireless internet every time I start up computer... do it manually

    whenever I start my computer I have to click on start then run and type "services.msc" then press ok, and then click wireless zero configuration and start it. then make a right click on the little computer with waves on the bottom right of my view select tray of wireless networks and then select change the order of preferred networks, and then under the networkes wireless tab check use windows to configure my wireless network then go back and view wireless to connect to the internet...

    is there a way to correct so I don't have to do that every time I start my computer?

    Thank you

    Noelle,
    You can go to Device Manager and remove the wireless network adapter.  Then go to the website for the manufacturer of PC and download the downloaded current drivers.  Then restart your PC, and after that he finds the card even once use the new drivers with it and see if that helps.
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • SQLite3.dll error every time I start my computer...

    I have Windows 7 and I get this message every time I start my computer...

    The program cannot start because sqlite3.dll is missing on your computer. Try reinstalling the program to fix the problem.

    How can I get rid of him?

    SQLite3.dll means SQLite, a lightweight SQL database engine.

    SQLite is used by several popular software - and I think some software need to use SQlite is installed on your computer and is set to start when the system starts.

    Press the Windows key + R, type in msconfig and press the Enter key. Select the tab "start". Now, uncheck an entry, click OK and restart your computer. If you still receive the error message, open msconfig again, check the entry you previously unchecked and uncheck another entry, click OK and restart.

    Continue to do so until you discover unchecking what entry causes the sqlite3.dll lack error disappears. Post here some details on this boot entry.

    Furthermore, according to the http://sqlite.org/mostdeployed.html McAfee products using SQLite. If your computer came with preinstalled McAfee and you uninstalled, it is possible that some parts of it were left after uninstalling. Try using the McAfee removal tool , and then restart your computer. If you are currently using any McAfee product and face problems with components such as the antivirus, try using McAfee Removal Tool, and then reinstall McAfee product.

  • Define a user account already but every time I start my computer the Welcome / logon screen does not appear.

    Original title: user account number.

    I've set up a user account already but every time I start my computer the home / log on screen does not appear

    Hi willy79,

    How many accounts do you have?

    You can check if the Welcome screen is enabled in your computer.

    For more information, refer to this link: to turn the Welcome screen on or off

    Hope the helps of information.
    Please post back and we do know.

  • Windows Update runs every time you start and says that "some updates failed"

    My computer wants to update each time after starting upwards.

    When I let it run at the end of the update that always, I get this:

    "Some updates failed"

    Microsoft. NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server, 2008 x 86 (KB2657424)

    Try to connect to windows update manually, choose the "custom" button

    Let it scan, perform updates.

    Also, the update update update to "Microsoft update".

    It is an upgrade for xp.

  • Why is windows defender stopped every time I turn on my compurtrer

    Defend Windows is turned off when I start my compurter and sometimes even if I'm on it, I'm so constqntly again.

    WHY?

    If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
    Bottom line: it's ok.
    It's normal.
    List of AVs which will stop Windows Defender:

    Norton
    McAfee
    AVG
    Microsoft Security
    Essentials

    If you don't have AV programs above, here's how to restart Windows Defender:

    Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
    topic status , it must be said... Has begun
    under Startup Type, it must be said... Automatic
    If it does not say that, right click on Windows
    Defender > click Properties >
    in Startup Type, click on the pointer to the right and select automatic
    to the service status, click Start
    Click OK when finished.

  • I downloaded Adobe first Elments 9 and now I get an Installer Windows Pop up every time I start my

    I loaded Adobe Premief Elments 9 and now I get an Inataller pop-up Windows whenever I start my computer and it cannot be deoeted.

    I have the following message;  "Windows install", the feature you are trying to use is on a network resource that is unavailable. " He futher States,.

    Click OK to try again or enter a different path to the folder that contains the HPProductAssistance.msi installation package in the box below.

    None of these options have managed over the past two weeks.

    I scanned most all forums and failed also in those

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01631295&lang=en&c c = us & contentType = SupportFAQ & prodSeriesId = 2510609 & prodTypeId = 18972

  • Startup.exe appears every time I start the computer.

    OT: start
    When I start my computer 'setup.exe'.s (with quotes) always appears.   After seceral closing click it disappears. It is very mysterios. Can someone help me?

    Meredith

    Hi Meredithjane,

    You did changes to the computer before the show?

    Method 1
    Step 1:
    I suggest to start the computer in safe mode and check if the problem is resolved.

    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:
    if everything works fine in safe mode, I suggest to perform clean boot and remove the program that is causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note:
    follow step 7 clean boot KB929135 article to reset the computer in normal mode.

    Method 2
    I suggest you run virus scan online by using the Microsoft safety scanner.

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  • I just downloaded avg to 2012 and every time I start my computer my firewall is disabled?

    When I start I go to maually and turn on my firewall. all started to do that after I down loaded avg 2012. never had any problems with the 2011 version. any suggestions?

    Hello

    Are you sure you have not installed the trial version of AVG Internet Security 2012 which includes a firewall?

    Check with the support of the AVG and in their forums.

    AVG support
    http://free.Avg.com/us-en/support

    AVG forums
    http://forums.Avg.com/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • can c:\windows\system32\setuert64.dll anyone explain why this appears every time I start my computer? Thanks .frank

    It seemed to happen after avg removed a virus.

    Windows 7 Home Edition premium on an acer aspire 5742.

    Launch msconfig and on the Startup tab, closely check entries and disable the bad.

    Probably left AVG a remnent when remove it we infection.

    Also try the free http://www.malwarebytes.org/products/malwarebytes_free/

  • Firefox has suddenly begun open every time I start my computer. The tab is still there and it never closes. I don't want it. How can I change this back?

    I tried unpin it, but it's always open.

    Whenever I start my windows appears in this Web site - > http://stabgames.org/ I noticed that it uses CMD to start this Web site, the problem is I have no idea how to remove it. I have attached the picture of the CMD console that shows how it starts the virus.

  • Qtcore4.dll missing - reinstall message appears every time I start my computer, how do I reinstall?

    What do I have to pay and install another program to reinstall? How to know it is legitimate and doesn't contain viruses?

    Hi SueBlack,

    1. did you last changes made on your computer before the show?

    2. how many time you receive this error message?

    3 do you have Electronic Arts Download Manager (EADM) installed on your computer?

    Qtcore4.dll could be part of EADM (Electronic Arts Download Manager) and should be in c:\Program Files\Electronic Arts\EADM directory (for 32-bit systems).

    I suggest you to perform the following troubleshooting methods:

    Method: 1

    Configure the computer to start in minimum mode to determine which application is causing the problem.

    To set up your computer in a clean boot, follow the steps from the following link:

    How to perform a clean boot

    Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

    Method: 2

    Also, I would say download you Microsoft Safety scanner and scan you computer for viruses.

    You can download Microsoft Safety scanner from the following link.

    Microsoft safety scanner

  • How can I disable the password so I don't have a need every time I start the computer? I am running VISTA

    I just want to turn on the computer and not necessary to use a password. I am running VISTA on a ACER aspire 9410-2028

    Hello

    This should help you:

    "How to Log on automatically on startup of Vista '

    http://www.Vistax64.com/tutorials/66966-logon-automatically.html

    See you soon.

  • Every time you start, my 4 monitors rearrange their order - it is not included on the desktop

    Recently, I downloaded several updates to Windows Vista.  Among them have been updated for my NVIDIA GeFroce 6200 display THE and NVIDIA nForce Networking Controller.  Restarts, 2 of my 4 screens would not appear.  By checking Device Manager, there was a mistake with the controller who controlled the 2 monitors.  The failure of two attempts to restore to a previous download time.  Then I downloaded a driver for the controller by mistake and was able to resume all 4 screens.

    However, when the computer reboots, monitors have been rearranged in order on my desk and a remained dormant.  I can bring to the top of the screen 4 by extending to the desktop under display and, at the same time settings, change the location of my primary monitor.  However, I don't want to do it every time I start my computer.  Also, all my icons was reorganized.  Any ideas how I can stabilize my understanding of monitor on my desk?

    Hi Wandwinc,

    We faced such issues and others such as the screen resolution changes at each restart, some BSOD etc a few recent updates released by Nvidia for their graphics cards.

    I suggest you restore to an earlier version display driver and check what is happening.
    http://www.nvidia.com/object/notebook_driver_instructions.html

    If this helps you fix until the question, let not install, update the drivers from windows update as well, they are compeltely checked by Nvidia.
    I suggest contact you Nvidia if possible.
    http://www.nvidia.com/page/support.html

    Concerning
    Terminator

  • Check disk every time you start

    Inspiron 5100 XP SP3

    Every time you start the computer says "disk Check is scheduled" and immediately starts a disk check that was more than an hour. I can cancel by pressing ESC, but even at every startup. Looks like I could uncheck something in msconfig/startup but what startup item? Any help?


Maybe you are looking for