Windows found the driver for your device, but encounter an error when trying to install
I have no ideal, what caused this problem because I am very sure that it was working again fine until I went to bed, but I woke up the next day, realize that my internet was completely cut off. I tried to update my network device but it doen't seem to be of any help.
I hope that someone capable of seccond me with some light as what the case of the latter and the resolution.
Thanks in advance. :)
-Brian
Hi Brian,.
You can follow the steps described in the article below
You receive an error message if you try to install a USB device on a Windows Vista computer that has been upgraded from Windows XP
http://support.Microsoft.com/kb/940267
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in Windows
Tags: Windows
Similar Questions
-
The following message please just explain?-Windows found driver software for your device, but encountered an error so that to install it. - is - Intel(r) 82566DC Gigabit Network Connection - then he says:-this device cannot start. (Code 10) What this means and how it effects the operation of the computer?-under material network compatible two adapters are mentioned-1. Intel(r) 82566DC Gigabit Network Connection (intel) and 2. Intel(r) 82566DC Gigabit Network Connection(Microsoft)
Hi Mohan kumar,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest you try the steps in the Microsoft Knowledge Base article mentioned below for you receive the error message:
Windows found driver software for your device but encountered an error trying to install it. Setting is incorrect.
http://support.Microsoft.com/kb/940267
Method 2: You can also view the article in the Microsoft Knowledge Base for instructions on fixing the code 10 error messages:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
Let us know if that helps.
-
Windows found driver software for your device but encountered an error trying to install it.
Original title: USB AUDIO Device
Hi, I tried to install a USB AUDIO device, but I discovered that there is no audio output. And while I try to update the driver, I found an error "Windows found a driver software for your device but encountered an error while trying to install it., USB, the system AUDIO DEVICE cannot find the specified file. I m using Windows 7 64 bit computer laptop, is there a way to fix this? real emergency...
Hi monopolystar,
Try to download the Audio driver manually from the following Web site and the Coachman:If you want to update BIOS drivers I suggest you to contact Acer for further assistanceHope this information helps. -
Original title: Windows encountered a problem installing the software driver for your device...
Arrrrgh! Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.
I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "
The job of printer/copier/fax end but not go on the scanner.
I tried the 'fixes' to epson.com repeatedly with no luck. This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.
I ran the program to 'fix' Microsoft ATS with no luck. It has detected the error and said that the problem has been resolved, but guess what? No, it isn't.
I clicked on install update driver/driver from Device Manager.
I tried the work around, eliminating the "LowerFilters" of the registry. Guess what? You have it, no luck.
So, before I go and buy a new printer/scanner, with no guarantee that they will work. Does anyone have another suggestion?
I am running Vista, 32-bit.
You can also try and replace or install the ntprint.inf file.
I had a similar problem on a Windows 7 PC and noticed that this file was not present. I just copied the file from a different PC Win7. The printer, I tried to install was a Brother MFC-J410w.
The file can be found here C:\Windows\inf
Hope this helps someone.
-
So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get. Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.
Well, I found the solution, just in case anyone has the same problem. Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.
-
Built-in camera does not work on my laptop Lenovo Thinkpad E420. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have windows 8 Windows 7 upgrade.
Appreciate your help. Thank you.
Syed
Hi Syed,
Thanks for the reply with the status of the issue.
I suggest you try to install the drivers for Windows 7 in compatibility mode and check if it works for you. I saw this troubleshooting procedure described working for other members of the community.
Step 1: Download the driver for the Webcam from this link of Lenovo.
http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015018
Step 2: Installing the driver in compatibility mode.
Make the programs more compatible with this version of Windows:
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
Please reply with the status of the issue, so that we can confirm that the issue is resolved.
-
Windows need to install the driver for your bluetooth device
Hello
I own the HP Pavilion dv4t-1300 CTO Entertainment Notebook PC
Runnin vista 64-bit for a year. affected by this bt prob 4 last 1 week...
on switchin' on bt this error mesge
"windows should install the driver for your bluetooth device.
automatic update of windows I've tried
looking for a driver to support/broadcomm hp product support
tried installin manually
BUT NOTHING has WORKED.
help please...
For this you need to 1 know which device is... Now, I was not able to find an easy way to do that, other that simply remove these devices one by one and see if the entry from Device Manager will... Or the other thing you can do, is use the reliability monitor and to see after what event the problem started...
-
Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...
I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.
Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!
This solved my problems. Good luck with yours.
-
Original title: error message
Whenever I turn on my computer (Windows Vista) I get the following error: "the Catalyst Control Center is not suppoerted by the version of the driver for your compatible graphics card. Please update your ATI graphics driver or enavle your ATI card using the display manager. "How can I do this? and do I do this?Hello
Update the driver may solve the problem. See the following article to install/update the drivers.
Update a hardware driver that is not working properly.
You can also download the drivers from AMD. Choose the appropriate brand and model of the device and download the drivers.
-
I just installed Win 10 (64-bit) on my desktop and I want to install/update the drivers on my computer because my internet on it is a little wonky (and in general I want to update the drivers anyway). However, when I go to the page "Software and drivers" and enter my name/type of product, I get a message saying "we have found the drivers for your product. Drivers may be in development, so please check back at a later date or visit the product home page. ». There were drivers available here yesterday. How long this change usually take? Can someone help me find the drivers of the template from another computer that might work for my computer? Thank you!
Hello:
It looks like all the drivers, specifications and manuals are missing from the pages of support again.
This happened earlier in the week also.
Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.
Whether the weekend will not help much either.
-
Dear, that which which may concern,.
I do not want to promote the material for your business but I don't know how to do this. Could I be put in contact with the one dealing with promotion of contact from microsoft, or microsoft studios, anyone who takes care of the halo franchise.
Hello
Microsoft - unsolicited ideas
http://www.Microsoft.com/en-us/legal/intellectualproperty/copyright/default.aspx#O14343 industries manage Halo - check community and forums
https://www.halowaypoint.com/en-usI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
original title: printer drivers
I have the driver for my printer but when I run the wizard tells me I need us the built in xp Printer Wizard to install the printer on this operating system. When I go to do this, it gives a fall to the bottom of the printers who does not understand my printer HP deskjet 9650.Is there a way do not use the Printer Wizard because I have the right driver. Only, it is not listed through the wizard.Hi michelledumont,
Follow the steps in the article.
Resources for the resolution of the printer in Windows XP problems
For reference:
How to install a printer driver locally for a remote printer in Windows XP
-
Get the following error when trying to install adobe reader in Windows 10... "the file 'C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AC0F074E4100}\AcroRead.msi' is not a valid package for the Adobe Reader XI product... How can I solve this problem? Thank you.
Hi JFO58,
I recommend you to run on your system cleaning tool:Download Adobe Reader and Acrobat tool - Adobe Labs
Later, try to install reader again by using the following link: Adobe Acrobat Reader DC install for all versions
Kind regards
Rahul -
spectrum x 360: "hp has encountered an error when trying to analyze your product."
whenever I try to identify my phone it says "HP has encountered an error when trying to analyze your product."
Why is it so? is there anyway around it? I know that you can manually enter your product, but I was curious to see how it would work.
Infrastructure solutions from HP support is a mandatory program.
This product detection tool installs the software on your Microsoft Windows device that allows HP to detect and collect data on your HP and Compaq products to provide fast access to support information and the solutions. Technical data are collected for products supported by this tool and are used to identify products, offer solutions relevant and automatically updated on day of this tool, in order to improve our products, solutions, services and your experience as our customer.
Note: This tool applies only to Microsoft Windows PC. This tool detects computers HP and HP printers.
Data collected:
- Operating system
- Version of the browser
- Computer dealer
- Product name/number
- Serial number
- Connection port
- Description of the driver/device
- Computer configuration / printer
- Hardware and Software Diagnostics
- Ink HP/Non-HP or Non-HP/HP Toner cartridges
- Number of printed pages
Details of the installed software:
- HP Support Solutions Framework - Windows, localhost Web Server Service and software
Remove installed software:
- Remove "HP Support Solutions Framework" via Add/Remove programs on PC
Requirements:
- Operating system - Windows 7, Windows 8, Windows 8.1, Windows 10
- Browser - Google Chrome 10 +, Internet Explorer (IE) 10.0 + and Firefox 3.6.x, 12.0 +.
You can try to disable adblock and adblock plus and see that he would invite you to install the software.
In case you are still unable to download the software, I downloaded the software on HP Dropbox.
HTTPS access: https://ftp.usa.hp.com/hprc
FTP access: ftp://hpssf:^[email protected]
Drop box host: ftp.usa.hp.com (15.73.40.56, failover: 15.73.244.52)
Login: hpssf
Password: ^ YHN9ol. (NOTE: case sensitive)
Account Expires: 24/02/2016-17:09:31 (drop box date expiration/deletion)
-
I use a brand new HP Envy 750-055xt CTO. Added the SSD (Samsung 850 EVO 120 G) and 16G Ram (Total of 24G (from Crucial)). The Win 7 OS has migrated to SSD and formatted the original drive for the purpose of storing files to a printer large format (new HP Latex, which will happen later this month).
Attempted to install Windows 10 but had multiple failures with error 0x80073B92 - 0 x 20009.
Disconnected SSD in case it was originally the above error, restored the system using created recovery DVD to state of origin (but always with 24 G of Ram).
In trying to pilot research and updates to bios on the HP support page, I now encounter error "HP has encountered an error when trying to analyze your product" which leaves me to proceed, except to order the DVD of restoration Windows 7.
I know I'm forgetting something in this whole procedure, but I have no idea at the moment what it could be.
This can help with the installation:
HP site:
Hope this helps
Maybe you are looking for
-
I just got a new laptop running OSX Lion. My printer is HP Photosmart 4780. The scan would not go, so I downloaded and installed the latest driver by the error message. The parser analyzes not now, but any utility disappeared. Instead, the progra
-
DeskJet 3055 has J611n and I touch
I bought an HP Deskjet 3055a J611n printer to my i pad. A logo in airprint is indicated on the box of the printer. But I can do this job and I doubtbif it is indeed an Air printer? Can someone help me?
-
Hello I want to make a button already quit button run in labview (arrow shaped). Here's my VI and I already have a stop button. but I have no idea to do a start button to run my program. Thank you.
-
need to link to the order page to purchase recovery discs, please and thank you.
-
I can send & receive emails. I can't send documents or photos. I get an error that says: there is no associated messaging program to perform the requested action. It is said to go in the default programs control panel. I did, but then I don't know wh