Windows grey button out in PS - help

Similar Questions

• What do you do when windows and buttons is gray out?

  Hi, my name is Rhionna and I have a problem on my Windows XP Service pack 3. Well, last night, I scanned my PC for registry errors there were some and I fixed them, but now I can not apply visual styles. Windows and buttons in properties is grey outside, it wasn't before but today I went to a link to a website to try to repair the files in my theme after that, it was gray would be out so what do I do? :(

  Registry cleaners are dangerous programs.  I do not recommend their use for these sorts of reasons.  Your best bet at the moment is to restore your registry to a time before you had this problem using "System Restore".  One of these two methods, you should get going again.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  If you cannot start the program of the above procedure, or if it fails to restore, then try this:
  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  HTH,
  JW

• I just bought an update of Windows Starter7 Windows Home PREMIUM 7 I can't find the upgrade button. Can someone help me please

  I just bought an update of Windows Starter7 Windows Home PREMIUM 7 I can't find the upgrade button. Can someone help me please

  If you have purchased the upgrade using Express upgrade, the product key should have emailed to your account you used to register for the upgrade.

  Also:

  Find your key product if your purchase of Microsoft Store:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

  Contact the Microsoft store:
  US: http://www.store.microsoft.com/Help/Contact-Us
  1-877-696-7786
  Canada: https://www.microsoftstore.ca/shop/en-CA/Contact-Us

  Microsoft:

  Why should I use my Windows Live account or create a new one?

  Using your existing Windows Live account, or create a new account will give you access to your key product at any time online in the future. It is important to use an account and a password which you are familiar with to allow you to get easy access to your information and to receive the confirmation e-mail which will include your product key.

  Will send me you a confirmation email with my product key?

  Yes. An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.

  What happens if I lose my product key?

  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• The last time I used identifier apple of my father to the appstore on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to sign identifying apple of my father, but I want

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

• Windows cross button problem.

  Hello

  I am trying to replace a button to stop a while loop by windows cross button using the structure of the event. Looks like the VI window closes, but it does not stop. I use this Sub vi vi. If the block diagram look like a stange. Please try to run the main vi. Can you help me understand what the problem is? I want the same functionality for both cases.

  Here is a quick sketch. Make sure that the Subvi is set to open the front panel and close thereafter, and then close it before the race.

• Windows and buttons locked tab appearance on screen

  I don't know why, but my windows and buttons drop-down menu is locked to the appearance on the view menu tab

  Here is a picture http://imageshack.us/photo/my-images/199/probro.png/

  My profile
  Intel Core i3
  3.10 Ghz clock speed
  Intel High Defination Familly with 1024 MB of VRAM graphics
  Windows XP Professional SP3 32-bit version
  4 GB OF RAM
  500 GB hard drive
  Help me

  Hello

  • How long have you been faced with the same question?

  You can view these methods:

  Method 1:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note:
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.
   
  Method 2:
  You can check in another user account.
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783
   
  Method 3:
  I also suggest you to update display drivers on the manufacturer's Web site.
   
   

• I have windows xp and whenever I click on Installer Windows icon comes out and says it: preparation for the installation and it takes a while to come

  I have windows xp and whenever I click on an installer of winows icon comes out and says it: preparation for the installation and it takes a while to come

  Hi DanBourque

   

  1 does the problem occur when you click the icon of the exe file or any application shortcut icon as well?
  2. for how long have you been faced with this problem?

  3. did you of recent changes on the computer?

   

  You can re-register Windows Installer and check if this helps-
  a. Quit all Windows programs.
  b. click Start, click run, type msiexec /Unregister in the Open box and then click OK.
  c. click Start, click run, type msiexec/regserver in the Open box and then click OK.
  d. restart your computer.

  I hope this helps.

• Windows HotStart button works only in Windows Vista.

  Original title: hot button start.

  is there a on off to do this, mine does nothing when I push it?

  Hi jeffreydluther,

  What application you are trying to open with HotStart button?

  You can try to configure the Windows HotStart button on your machine and see if the problem still occurs.

  Configuration Windows HotStart

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What upgrade options are available for windows 7. ? Please guys help me I want to know,

  Hellou guys... am a student and I have worked in the process of upgrading to Windows 7, is seeking for your help (to find out what upgrade options are available for windows 7?)

  Hello

  upgrade to windows 8.1 and windows 10 available

  Start by checking the compatibility and system requirements.

  You can check the links below

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-from-Windows-7-tutorial

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-to-Windows-10-FAQ

• Why Microsoft did stop Windows 7 when Windows 8 is out?

  Windows 7 has been/is the best operating system, Microsoft has released to date. Lets admit, Windows 8 is designed for tablets and touchscreens. So why has Microsoft stopped selling Windows 7 when it is perfect for desktop computers? I build desktop and I refuse to install Windows 8 because it was so badly designed. I think "stockpilling" Windows 7.

  Thank you

  Hi Nathan,

  Thanks for posting your question in the Microsoft Community Forums.

  Based on the information, it seems that you are facing problems to buy Windows 7.

  It would be useful that you can answer questions to help you best.

  1. where did you get the information that Microsoft has stopped selling Windows 7?

  2. are you trying to download Windows 7 buy\ from the Microsoft Web site?

  Although Windows 8 came out, Windows 7 is still supported by Microsoft and you can buy the same thing from Microsoft store.

  For more information, see the articles:

  Care about the lifecycle of Windows

  Windows 7: Microsoft Store

  If you would like more information, you can also get in touch with Microsoft Customer support for assistance.

  Microsoft customer service

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Zoom in Windows 7 is out of control. Difficulty?

  Shortly after the release online, I experience

  electronic zoom.

  Hello

  Thanks for posting your query to the Microsoft forum.

  I will definitely help you with this however, you did not provide enough information to resolve the issue. Please provide us with more information.

  1. What exactly is the problem you are having with Zoom in Windows?
  2. You have selected Windows 8 in the category and mentioned Windows 7 in the title, what operating system is installed on the machine?
  3. Are you facing problems with the zoom on the Web page?

  In the meantime, you can check out these Microsoft help articles below if this is useful:

  Zoom in on a Web page

  http://Windows.Microsoft.com/en-us/Windows/zoom-webpage#1TC=Windows-7

  Use the magnifying glass to see the items on the screen

  http://Windows.Microsoft.com/en-in/Windows-8/use-Magnifier-see-items

  I would be grateful if you can provide us with the screenshot of the window to help you.

  Please refer to the article below, how to include a screenshot in your message

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  Please answer us with this information and the current state of your computer, we will be happy to help you further.

  __________________

  Thank you best regards &,.

  Isha Soni

• Revolve 810 G1 unlock in tablet mode. Windows Security button?

  
  

  There is a BIOS update for the revolution by moving to version F.43 update allows to touch the power button while pushing the Windows button (left of the central hinge) to act as the Windows Security button. -It worked for me.

  I also read that by pressing [Ctrl], [Alt] left button right button + [Del] button on-screen keyboard works but I have not tried.

• Our Toshiba Inspiron will not start windows, even in safe mode. Help, please!

  After the updates of this week, the system will not load anything.

  Hi Juliet,

  Thanks for asking the question in the Microsoft Community forum.

  From your description, I understand that after Windows Update, you can not load Windows.

  To better understand the question, please answer the following questions:

  1. What is the version of the Windows operating system that is installed on your computer?

  Reference: http://windows.microsoft.com/is-IS/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  2. what happens when you try to load the system? You receive an error message?

  3. what application or anti-virus security suite is installed on your computer?

  4. you remember after installation of update, you are facing this problem?

  Remove any external device connected to the computer without keyboard and mouse and then perform the methods.

  If you are using Windows 7 and Windows Vista, follow the mentioned methods:

  Method 1:

   

  If the computer does not start in safe mode, perform the last known good Configuration.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Note: Link above also applies to Windows Vista.

  Question remains always use same method 2.

   

  Method 2:

   

  Try to perform the Startup Repair and check.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  If you are using Windows XP, follow the mentioned methods:

  Method 1:

  Perform the last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2:

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Hope the above information is useful, if you have any question back to us, we are happy to help you.

  Thank you.

• Windows Explorer button disappeared?

  I'm sure I've made some changes and now my Windows Explorer button is gone. I did reappear by going to all programs-accessories and right click Windows Explorer and chose "Pin to start menu. But is it the only way that it is displayed in the Start Menu? Is there somewhere else it displays down by & assistance, search, and run?

  It seems normal. The only place in the start menu where the "Windows Explorer" shortcut is displayed by default is under [Start - Programs - Accessories]

  And no, he does not appear in the menu on the right as you describe.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience