Windows hangs at a black screen

Similar Questions

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Windows fails to load. That it recharges on normal startup. Hangs on a black screen with a cursor in repair mode.

  I was in my class and hit the computer on the desk. I turned it and then turn it on again now, this problem occurs. It's a Toshiba, and Toshiba normal screen comes up and takes me to the screen "windows failed to load. When I choose to start windows normally, it hangs on the Green loading bar before you restart thereafter. I have it on the repair of the system right now, but he is suspended on a black screen with a cursor and nothing else.

  Hello

  Since then, he has been the "Crash test" the help of a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or the system manufacturer support is probably needed. The underlying problem is probably
  material and it is doubtful that all the efforts of software will work even if it is remotely possible.

  The problem may come from the damage or corruption of the hard drive for the next message will be directly related to
  This question.

  --------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Sims 2 questions on Windows 7 (64 bit) - black screen when starting the game

  Questions of title: Sims 2 original on Windows 7 (64-bit)

  The compatibility for Windows 7 thing, says that the Sims 2 and all the expansions will run in Windows 7.

  When I installed in fact all games Sims 2 on my laptop, however, the game does not start.

  I click on the game, opened upward, and I just get a black screen, causing me to have to restart the entire system.

  I tried to run in compatibility mode, which was a no-go. EA customer support asked me to update my drivers, I did. Because none of this worked, I guess that's another problem in Windows 7, so it would be great if I could get a solution to this problem!

  --------------

• Having trouble installing windows 7 dv6-2088dx (black) screen

  I have the dv6-2088dx & I have an error (re) installation of windows 7

  I reformatted the hard drive to speed it up. It's my first time to do and I used the recovery program. I also created recovery disks.

  The comprehensive recovery program, starts to load windows but is just a black screen. Help, please

  I solved my problem, call the support number. I have a windows 7 install disc and used that instead of my recovery disks

• Impossible to load windows, just get a black screen with cursor

  I restarted my computer and now Windows will not load. It happens on the screen says 'Windows' in the bottom with green bars. Then it goes to a blank screen with a cursor to work. I left alone for a bit to see if she would just take a while to load and the screen saver came, that works, but I cannot get it on my desk.

  -nothing has been installed recently

  -Tried to reboot in safe mode (cannot enter safe mode)

  -Tried to restore to previous points

  -Tried CTRL + ALT + DELETE (does nothing, can't pull up the Task Manager)

  Hello

  A blackscreen can be very hard to fix. It's my generic convenience store which some you already have
  has tried.

  One to try:

  "C:\Windows\System32\winevt" in this folder is an another NEWSPAPER named one

  Rename the folder of NEWSPAPER LOGSold and restart the computer.

  'C:\Windows\System32\winevt\Logs'-> 'C:\Windows\System32\winevt\Logsold '.

  REN C:\Windows\System32\winevt\Logs C:\Windows\System32\winevt\Logsold

  You can try in a Command Prompt of a disk of Vista or a recovery Partition if you can't navigate to
  the actual winevt file.

  -----------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista installation disc: Black screen with a cursor and then nothing happens

  A blue screen appears when I try to start Windows and I'm trying to fix the computer through my installation disc I have. But when I try to run my Vista disk installation happening by loading the files fine. It then shows a black screen with a mouse cursor that moves. After that, nothing happens even if I leave it for hours to sit. It is a real disk Installation of Microsoft for Vista.

  If a clean installation of a real Installation of Vista disc does not work, then you probably have some kind of hardware problem (and the blue screen, you got before makes this even more likely).  You can try to do some troubleshooting on your own hardware, but frankly you probably put "t have tools or spare parts to do very much.  Here are some instructions that may help:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.

  If this does not work, then I suggest that you take it to a repair shop of computer with a good reputation for the service where they can troubleshoot, diagnose, identify and possibly repair or replace the problem.  Before you import it in, I suggest that you protect your important data, as it is likely that they will wipe the hard drive clean in the process.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD.  This should hopefully give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, slave the drive to another computer and copy the data in this way.

  I'm sorry, we can not help more, but from your description there is no option of software if you do not have to do a clean install of an Installation of Vista genuine disc.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista, problem of black screen at startup

  original title: Windows Vista black screen problem

  I have a laptop that has an installation damaged Windows vista on it.

  When he starts from the (or should I say trying to start), it's just a black screen, with the slider makes this action of spinning, but that is as far as it.

  It does not start in safe mode

  It will not boot into normal windows is

  & When I run vista disc start Recovery option, he just said, is that the boot files are ok.

  I'm eager to perform a new installation of vista on it, but the label of product key on the base of the laptop has been damaged and is unreadable.

  Q. is possible to recover the product key of the installation that is damaged so that I can run a new installation?, (as I can't currently afford to purchase a license fee)

  Thanks for any valid help

  Craig

  If you can get it running, you can use these to get the PK:

  http://www.Belarc.com/free_download.html

  http://www.magicaljellybean.com/KeyFinder/

  If your Vista operating system is still active and running, use one of the programs above to find your product key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If it's a DVD of vista, using the options you can try a system restore; read the info below.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows could not start - black screen

  My laptop does not start - I have a black screen with the message

  Windows could not start.  A recent hardware or software change might be the cause.

  
  

  File CLFS. SYS

  Status: 0xc00000e9

  Info: Windows could not load because a required file is missing or damaged.

  I ran the Vista startup repair disk, but results from that start-up cannot repair this computer automatically.  root cause found: critcal C:\CLFS boot file. SYS is corrupt

  I can't start in safe mode - when I try it starts to list files, stops after about 5 and then sends me the black screen message.

  Hello

  To begin with, would not be clfs.sys C:\, it would be under C:\Windows\System32. This could indicate one of the following two issues:

  (1) your boot sector is damaged.

  (2) you have a virus masquerading as a legitimate system file.

  For one, the first thing you should try are the steps detailed here: http://support.microsoft.com/default.aspx/kb/927392?p=1

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• The gel at the Windows logo goes to black screen HELP!

  Hello

  First when I turn on my laptop I have SMART disk error. I have been informed that the hard drive needs to be replaced, but I have also another problem is when I press on enter to continue to start. My computer freezes s to the Windows for a good few minutes, then I get a black screen and the cap lock light flashes 4 times.

  Can someone help me?

  HP Pavilion DV6-3040sa

  Windows 7 64 bit

  Before that happened, my laptop has been extremely slow and unresponsive this is why I decided to do a clean install of the operating system. My laptop was still slow and be insensitive. I have the installation could of thought was wrong somewhere so I reinstalled the operating system again, but the same problem. I installed some updates and Service pack 1. Restarted my laptop and then receive the SMART drive problem.

  Thank you

  Kin

  Replacing the hard drive means a re-installation of the operating system.  Resettlement reign essentially all software issues that may have accompanied the failure of your hard drive.  So the answer is Yes it should solve the problem.

  If you don't have recovery media please contact HP using the information provided above.  I suggest you contact instead of trying to create your own media.  As this will probably be very difficult and problematic on a failing hard drive.

• Windows 7 shows a black screen with cursor

  I tried to upgrade my desktop Windows 7 Edition computer Home Premium to Windows 10.  I did the morning but left him to finish while I was at work.  When my husband returned he said it was completed 99% so it just reduced and used the computer.  At the time I got home a few hours had passed and it was still 99%.  I tried to restart and now after I get in Windows startup and password screens. I have a black screen with the arrow cursor moving very well.  How can I fix?  Thank you!!

  Hello Mary,.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to black screen problem. I will definitely help you.

  This problem may occur because of corrupted display driver.

  To diagnose the problem, please Start Windows in safe mode and check the number.
  Reference:
  https://support.Microsoft.com/en-us/help/17419/Windows-7-Advanced-startup-options-safe-mode

  If the problem does not persist in safe mode, uninstall the display driver. Please follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run box, and then press ENTER.
  b. Click to enlarge graphic cards, right-click on the map and click Uninstall.
  c. restart the computer.

  Now, reinstall the display in normal mode driver. You can either download and install the driver to display from the manufacturer's website or proceed as described in the following article.
  Reference:
  Updated a hardware driver that is not working properly
  https://support.Microsoft.com/en-us/help/15048/Windows-7-update-driver-hardware-not-working-properly#update-driver-hardware-isn ' t-work-properly = windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Upgrade Vista to Windows 8 Pro. Black screen on reboot.

  Transition from Vista to Windows 8 Pro. When installing, I get a black screen on reboot. Has anyone seen this?

  HP Pavilion M9040N desktop / GN553AA

  Windows Vista 32-bit

  Thank you

  Phil

  Well, I feel like a fool. There's nothing wrong with my upgrade at all. I have my TV connected to my computer and when I upgraded she won the TV as the primary monitor. I just had at the end of the installation with my TV as a monitor and then reconfigured. Sorry, y ' all.

• Windows 7 - build.7601 black screen copy Windows not genuine.

  Hello

  At my laptop 5 years and have not had a problem until last week, for days shut down he said do not clear the update of loading, this went on for days and then I managed to get rid of him restore to an earlier date, I thought it was ok, but now I have a black screen with background of words just say that my windows 7 is not genuine build 7601 :

  I have a Dell inspiron15R, software already loaded.

  Ive tried typing my product key when prompted but it does not work and one on my battery compartment is very thirsty, but I think I got the numbers, but who have not yet tried.

  After reading a lot of other messages, I'm just confused, that I can't change my key on the computers tab, properties etc. that are grayed out. This is information on diagnosis I hope someone can help please:

  See you soon

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Code of Validation caching: 0xc004c4a8
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {B1D4AE93-9BFD-4FD9-B02B-FA39556E466C} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.160211 - 0600
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {B1D4AE93-9BFD-4FD9-B02B-FA39556E466C}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-3324641554-3248549496-993712386Dell Inc.. Inspiron N5010 Dell Inc.. A12 20110125000000.000000 + 000ADBD3B07018400FC08090409GMT Standard Time(GMT+00:00)03DELL WN09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514
  Error: the product key is not found.

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A8
  Beyond: PASS
  Event timestamp: 3:30:2016 22:48
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GFaLhCsqEKuV2I66poi6PCKLilcXQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  SSDT AMICPU PROC
  WN09 DELL SLIC
  OSFR DELL M08

  Hi Gerry

  Sorry not been back but my lappy won't let me do anything, my browser kept just close after 30 seconds.

  I took it to our local store and they said it's a common software problem and I needed to contact microsoft, I have on my PC got to them and with a link has managed to get in my lappy.

  they were doing things for one hour to be fixed and made faster for me, apparently the keys change for different downloads, they found the product key was not something like the one I had.

  So thank you for your help and advice

  At soon Jakki

• Windows 7 clients receive black screen RDP'ing to the 2012 Server

  Hello

  I have a situation where I have a domain with two machines 2012 Server 2003, which is a domain controller, the other Member.

  It seems that none of the Windows 7 clients can connect via RDP to one of the two machines Server 2012. The symptoms are a black screen

  Fortunately Windows XP machines can connect to the server of 2012

  Machines XP and Windows 7 are members of the domain

  Other symptoms include Windows 7 not being machines is not able to connect to Exchange 2010 and OWA does not

  I disabled the firewall, disabled group policy. made sure the RDP V8 patch has been applied for W7 clients, saved event logs

  I have connected to the server using RDP 2012 on a W8 client (which is not part of the domain), can also use OWA

  Thoughts or ideas greatly appreciated

  Thank you very much

  Simon

  Hello

  The question you posted would be better suited in the Forum of the server. Please visit the link to find a community that will provide the support you requested.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope this information helps you.

• Repair installation fails on Windows 7 and get black screen

  I put in a repair disc and then I put in a disk to reboot and did he pulled upwards so that I had to do a reboot but got black screen saying something was not so tempted excessible to esc but used left me tried to restart again and it will not restart please help running windows7 64 bit

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.