Windows has blocked a potentially dangerous file and will not allow him to ti be installed from canon printers
Windows called a potentially dangerous file and will not be installed, it is from the canon printers, how can I install it?
Windows has blocked data access cab 1
Hello
1. which version of the operating system you are using on the computer?
2. What is the accurate and complete error message that you receive?
3. have you made changes on the computer before the computer?
4. are you trying to install the printer software\downloading turn off the internet?
Method 1:
You may need to download the correct driver\software from the manufacturer's website only.
Method 2:
You can perform the clean boot and try to install and check:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
You can disable the security software and check
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Tags: Windows
Similar Questions
-
I have the media player 11 and it worked very well. Yesterday I opened a session and opened it, and there is no music in the library. Playlists are still there. I tried to manually add folders to watch. No joy. When I repeated the procedure for adding, records Analyzer was still empty. As if I never said what to monitor.
I followed the advice offered in this forum at staceygumbert and followed a link to:
This notice did not. Once I deleted the database because it suggests that WMP asks about media sharing. When I click on the button 'Settings' WMP fails and sends an error report.
If I connect my wife, everything is OK. I tried to copy its database through my user profile. No joy.
My Roku Soundbridge can't 'see' libraries. However I think it's to be expected considering not having WMP does not all libraries.
Software configuration:
Windows media 11.0.5721.5268 player
XP SP 2
Hi thesafesurfer,
Follow the steps in this document to resolve the issue with the library. Let us know if that helps.
-
When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail. This has happened when I changed service providers
When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail. This has happened when I changed service providers
===================================
Try to visit the support site of your new service provider
and search for instructions on how to set up your email. -
an adobe update this morning so now, many of my programs marked as Acrobat files and will not not open so I uninstalled Acrobat and tried to reinstall several times using Google, google chrome and internet explore and always get the same problem please advise
Greg,
I hope that all the software are disabled?
-
Whenever I try to download it says that there is a virus attached and will not allow the download to continue. It only gives me options other than come on the Microsoft site. Help! How can I fix this problem without having to lose all the information stored on my computer?
Original title: download questions
Whenever I try to download it says that there is a virus attached and will not allow the download to continue. It only gives me options other than come on the Microsoft site. Help! How can I fix this problem without having to lose all the information stored on my computer?
Hello
It would seem that you are infected with malware.
Read the answer in the link by The ball
Your PC is probably infected with the new variant of Sirefef AKA Zero access. The authors scheduled to turn several times a day to help him avoid detection by anti-malware programs.Suggest you use HitmanPro Kickstart, which should remove this malware and fix changes made to the computer by the malware: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer. Hitman Pro Kickstart is available as a 30 day trial version.Good luck...
-
I built a css style sheet in Dreamweaver. When I try to attach it to my website html, it prompt me that my 'css file seems to be a .html file and can not attach. I tried to remove the / * / as suggested by other forums, but this has not solved the problem. I was using stylesheets css without problem 2 days ago. Now, I get this error message. How can I fix this so I can join my stylesheet?
What looks like the code in the CSS file?
An external CSS file must be written in CSS only (no html tag like,
,etc.).It must also have a .css file extension, if yours has an extension .html, that it will not work.
-
Try load W-10. Process appear to be normal. The display is now BACK showing script and will not change and cannot close the laptop down or off. Not a user made and do not want to complicate the issue.
WAWood;
The laptop has completed W - 10 download and installation seems to work as announced.
The problem with the 1st attempt will be captured in Gremlins.
Thank you for your quick response.
Ben
-
When using the Ctrl-alt-delete option and the Manager tasks appears it seems without borders. The task manager remains after the programs are all closed and will not go away, unless the computer is off.
It's called mode 'small footprint '. Double-click anywhere on the border of the Task Manager window and you will get the Menu bar in the rear.
-
It of frustrating and does not allow me to do much... How can I fix, why used it start up normally?
I tried to restart, trouble shooting and download assistance programs that I bought... but I turn off the computer and reboot and it does the same thing and downloads never what I installed.
Hello
- Close all running programs and open the windows if you are back on the desktop.
- Click on the Start () button.
- In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
- The System Configuration utility opens
- Make sure the Normal startup is selected
- then click on the STARTUP tab at the top
- Make sure that the startup is disabled
- Apply - OK - then follow restart guests
________________________________________________________________
If above does not try a Startup Repair:
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
-
Running Windows 7 and I cannot scan my computer or download files, system tray blushed and said, 'the file contains a virus' and the computer, and then delete the file. In the alert section it says that Windows Defender works. But it will not open Setup or scan. try to get a repair tool and the file does not open, he repeats to me, the file contains a virus and it does not open. What can I do other than to bring this problem to the experts. Maybe someone has an answer.
Thanks, D G
Your PC may be infected with the new variant of Sirefef AKA Zero access is. One of the problems is that the downloads are identified (wrongly) as a virus... and it will be often disable and prevent installation of various anti-malware programs.http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Win32%2FSirefef
Suggest you use HitmanPro Kickstart, which should remove this malware and fix changes made to the computer by the malware: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer. Hitman Pro Kickstart is available as a 30 day trial version.
For more information, see http://dl.surfright.nl/Kickstart-FAQ.pdf and http://dl.surfright.nl/Kickstart-User-Manual.pdf
And
http://securitygarden.blogspot.com/2012/04/understanding-Microsoft-anti-malware.html
The Windows Defender program which is pre-installed on W7 and Vista is an antispyware program only... .you must run a program full anti-malware.
http://www.techsupportalert.com/best-free-anti-virus-software.htm
http://www.dslreports.com/Forum/r28298407-2013-anti-virus-poll-
http://www.AV-Comparatives.org/
http://ask-Leo.com/what_security_software_do_you_recommend.html
See the following compliments of quietman7 MS MVP : choose an anti-virus program
-
my windows defender, is arrested in C:\Windows\Home Premium.xml at the tripping and won't go any further on the scan, what's the problem? It also stops at C:\Windows\unind.exe,what of wrong with her? He did this for about a month now and I had to close my computer, restart it and try and restart windows Defender, and it always stops at a file any
Hello
This tool of troubleshooting for Windows 7 - Vista is similar - to use XP RUN instead of start - search.
Two possibilities include disk and malware problems.
Disk problems can take seriously very quickly so I carefully check the disc now and do not forget
to keep redundant backups of your important data (use several methods).Inside the Windows - Regular or Safe Mode (repeatedly press F8 as you start).
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlGOLD:
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html----------------------------------------------------
For even better and more efficient to check:<- advanced="">->
At the Recovery Console prompt (if you have one) or a Vista/Windows
disc 7 - If you do not have a Vista/Windows 7 disk you can borrow a friend (it must be the same
32 or 64 bits and they are not protected against copying) or make a. Also your system manufacturer will sell the
physical disks cheap since you already own windows.Chkdsk /f /r
RESET
After k and before space / f and before.
sfc/scannow
RESET
Space after c and before.
How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7----------------------------------------------------------------
Go to settings/settings F2 (BIOS/CMOS) often as you start so watch the screen as you start. Define the
Start the command of CD/DVD disks of Windows (Vista or Windows 7 If you have installed.)
Be sure to set in when.If you need to repair disks - these help repair Windows not re-install.
Download Windows 7 system recovery discs - charge now $9.75 for ISO
images to make the discs.
http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/How to create a Windows 7 - free system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html=====================================
If CheckDisk is unable to fill as above:<-- manufacturer's="" diagnostic="">-->
(The old 302602 links isn't now valid for Diagnostics links).
Manufacturer diagnostic utilities - run one to your hard drive
http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.htmlCorrected list dated 06/09/2010
Fujitsu hard drives: utility of diagnosis here
http://www.Fujitsu.com/EMEA/products/HDD/Hitachi hard drives: utility of diagnosis here
http://www.HitachiGST.com/support/downloads/IBM hard drives: use Hitachi utility *.
Toshiba hard drives: use Hitachi or Maxtor utilities
Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
http://www.Seagate.com/www/en-us/support/Quantum hard drives: use the Maxtor utilities
Seagate hard drives: here Diagnostic utilities
http://www.Seagate.com/www/en-us/support/downloadsConner hard drives: use the Seagate utilities
Hard drives Samsung: utility of diagnosis here
http://www.Samsung.com/global/business/HDD/Hard drives Western Digital: utility of diagnosis here
http://support.wdc.com/product/download.asp?lang=en
Trial versions of one of these 'might' help.SpeedFan
http://www.almico.com/sfdownload.phpHD Tune
http://www.hdtune.com/I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
My son was running from some strange programs and the keyboard and the mouse no longer works, while VISTA wouldn't start, but Ubuntu has worked well. The desktop version of 7 on the computer was downloaded directly from Microsoft, so I do not have an original installation disk. The original is in a file called "old windows".
Hello
You can retrieve only the data from the windows.old folder files, not programs
programs need to be reinstalled again from the original media
How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation
-
Adobe Application Manager, absent of the file and will not correctly redownload
When trying to open Photoshop, I got a pop-up saying "Adobe Application Manager to start your trial, is missing or damaged." I followed the link to download a new copy, but I keep getting the same error. I tried it redownloading at least five times, restarted my computer and using the cleaning tool from Adobe to clean my Adobe files and re-download creative cloud as a whole. When I redownloaded creative cloud, the desktop app open very well, but the Photoshop application now has a sign of orange error beside it saying the update failed. The failure message said there was an unknown error and contact customer support. I have a Mac OS X.
If please remove Adobe Application Manager to help cleaning tool and reinstall it with the help of Adobe Application Manager Windows | Macintosh
-
I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!Any ideas on how may get a repair disk or fix it otherwise? Thank you very much
Run Memtest86 +: your computer passes this test?
Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152J W Stuart: http://www.pagestart.com
-
Windows Vista Home Basic Edition keeps looping and will not start
Windows Vista Home Basic Edition will not boot to the Welcome screen. It keeps restarting loop. I tried to go into safe mode, but who does not start too. Loops of safe mode and return to the start screen.
I have a dell laptop and I just restalled operating system. I had Windows Update set to automatically download and install. PC worked great until the next day (after the time programmed for automatic updates). I'm assuming that the started after some windows updates when installed. Unfortunately, I can not enter in Windows or Normal or Safe Mode.
Bill
If safe mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dell recovery options:
Above is Dell to reinstall Vista from the DVD on your computer.
And that way if you have a recovery partition on your hard drive.
See you soon
Mick Murphy - Microsoft partner
Maybe you are looking for
-
I have a HP Pavilion dv7 laptop 1273cl. I want to upgrade the memory. The software, with which it came was Windows Vista, but I've since updated that to 8.1 Windows. I read that this upgrade memory depends on the software installed Windows (Xp, vi
-
Create table 22 x 2 string a number
I am new to LabView and I need to create and 22 rows and 2 columns of table, items can be text and numbers as: fodu1tx 22183.000000fodu2tx 23191.000000 currentmod1 qpsk currentmod2 pskffidu1315 315.000000fidu2315 315.000000.
-
Tengo una barra volumen in the part superior del teclado Québec're tactil cual ha dejado funcionar, no to como solucionarlo, gracias.
-
How can I save what I need to install the package to upgrade XP3?
There is no backup Windows XP program, so I need some advice on what to backup and how.
-
When I start my computer, I get a screen that tells me that the CONTRACT has expired and I need to call the company, that the computer can be rented to renew, however is not a rental? I have no idea what this same refers to, however, it gives me a pa