Windows has encountered a problem

Similar Questions

• Satellite L305D-S5892 - Windows has encountered a problem

  Hello

  I have an I have a Toshiba-L305D-S5892
  With Vista Home Prem 32

  I have a few problems and am currently blocked.

  Each problem below, is a problem that I met after taking a few steps.

  * The 1st problem *.

  A few hours ago my screen was frozen just after I tried to install this codec from microsoft, so the only option I had was to do a hard reset.
  When my computer back on, I received this message:

  Windows has encountered a problem communicating with a device connected to your computer.

  This error may be cause of disconnect a device removable storage such as an usb external drive while the appliance is in use or by defective as a hard disk hardware or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  File: \Windows\system32\winload.exe

  Status: 0xc00000e9

  Info: An unexpected I / 0 error has occurred.

  I didn't have any usb device or removable in media.
  I can only access my utility series at the beginning, which is this menu: hand-Advanced-display-security-Boot - out

  * 2nd problem *.

  I opened my laptop and released the CD / DVD + RW, he started upward and now I get this message:

  For Realtek RTL8101E/8102E PCI - E Ethernet Controller v1.07

  PXE - E61: Media test failure, check cable.

  PXE - M0F: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  * 3rd problem *.

  I downloaded the NEOSMART repair Cd.

  Once I'm in the System Recovery Options, it tells me to select an operating system. However it has not traded. If I press drivers to load, then a message tells me to insert the media, and then select drivers. I almost 'ok', and then am taken to explore, when there are a few system files and files (all empty)?

  I'm confused... any help?

  Hello

  For me, it looks like a problem with the system eventually installed the HDD failures.
  Why?

  Due to the issue described in point 2.
  PXE - E61: Media test failure, check cable error is displayed because the phone didn t find the installed operating system and try to boot from LAN.
  This happens especially if the HARD drive was not recognized by the BIOS.

  My recommendation;
  Access the BIOS and check if the HARD drive is listed there.
  If this isn't the case, then you will need to replace the HARD drive and reinstall the operating system.

  If the HARD drive is listed in the BIOS, then take a recovery disk and try to reinstall the OS again.
  If you have no recovery disc, then you can order it here.
  (I guess it's a Toshiba laptop model we)
  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  Good luck

• Windows has encountered a problem with the DVD/CD on Qosmio G20

  has obtained a g20, problems with the cd player. When I go to copy or move music or pictures on my cd/dvd, I get a pop up saying windows has encountered a problem with this drive...
  can someone tell me what is happening.
  Thank you

  On this path, it is not easy to say anything. Try to remove the drive from Device Manager, and then restart the device. The unit should be recognized and installed correctly.

  If you want to create data CDs using windows options please check disc recording option. Check the properties of the drive and check option under the recording tab.

  Good bye

• Windows has encountered a problem and needs to close

  Windows has encountered a problem and must close is happening frequently. ; When I try to close it won't let me

  Hello

  Thanks for posting your question in the Microsoft Community Forums.
  It seems that you receive error message "windows has encountered a problem and needs to close" on the computer.

  Provide us the information to help you further.

  1. don't you make changes on the computer before the show?
  2. when exactly you receive the error message?

  Try these steps and check if you are able to solve the problem.
  Method 1:
  Step 1: Check if the problem occurs in safe mode:

  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check that helps:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2:

  You can scan System File Checker to fix corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Reference:
  File system (CFS) Checker
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  If you are always faced with the question, please respond with more information, and we will be happy to help you

• Windows has encountered a problem, try to copy a file... why?

  Windows has encountered a problem, try to copy a file... why?  MikeW

  There are many possible reasons.  What you have tried to do over time?  Is there additional information printed with this message?  A few possible reasons come to mind:

  • The file was opened exclusively by the operating system or another program
  • The full path to the file from the C:\... contain more than 256 characters
  • Permissions problem: you have read permissions for the file or permission in writing to the destination
  • The file entry or damaged directory disk sector. (Run the command chkdsk with the /R option to this address)
  • The file is larger than 4 GB and you try to copy it to a disk formatted with a FAT file system.

  I'm sure that there are more reasons, but need more information.

  HTH,
  JW

• When copying pictures on a CD, the error message "Windows has encountered a problem trying to copy this file.

  Try to copy photos on CD. I get the message "Windows has encountered a problem trying to copy this file", it comes on for each photo in the file until they are all updated. This method used to work well. Answers would be appreciated.

  You are in your folder my pictures?

  What happens if you do the following...

  Select (highlight) a group of miniature photos...

  Right-click the group selected...

  In the menu choose... Send to / DVD - RW drive...

  Transfer Photos to a CD - how to burn Images
  http://www.brighthub.com/multimedia/photography/articles/5126.aspx

  ===

  FWIW... the following freeware can be worth a try:

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (works on XP / Vista / 7)

  Download CDBurnerXP
  http://CDBurnerXP.se/download.php

  CDBurnerXP - create data disc
  http://CDBurnerXP.se/help/data/compiledata

• Cleaning my disc shows a window saying Windows has encountered a problem and needs to close HELP!

  My computer works fine, but when I try to lift the cleaning disc, I get the window saying: Windows has encountered a problem and needs to close. Please help me.

  1. http://support.Microsoft.com/kb/823302 
     The disk cleanup tool stops responding
  2. http://support.Microsoft.com/kb/812248 
     The disk cleanup tool stops responding while it is compressing old files on a Windows XP-based computer

• Windows has encountered a problem: status: 0xc00000e9

  Windows has encountered a problem communicating with a device connected to your computer.

  File: / Boot/BCD

  Status: 0xc00000e9

  Info: an unexpected i/o error has occurred.

  That's what my laptop won't let me go, I can't support on enter or escape and when I restart it f8 does not work. HELP PLEASE!

  Hello

  1. did you of recent changes to the system before the show?

  2 you have. what external device connected to the system?

  3. what happens when you try to press F8?

  Method 1:

  Follow the link below and follow the steps, check if it helps.

  What are the system recovery options in Windows 7?.

  Method 2:
  
  Also run the check disk in Windows Recovery mode.
  To do this, follow these steps:
  (a) open the Windows Recovery Mode command prompt
  (b) type C: and press ENTER. On C:\ prompt, type chkdsk /r and press to enter.
  
  Note: This could result in a loss of data on your computer; It is recommended that you back up all important data on the computer before performing this operation.

  Let us know if it helps.

• Windows has encountered a problem communicating with a device connected to your computer. Status: 0xc00000e9.

  * Original title: 0xc00000e9

  Hi all

  I had a problem - would be great if someone could help me!

  =====

  Windows has encountered a problem communicating with a device connected to your computer.

  This error...

  File: / Boot/bcd

  Status: 0xc00000e9

  Info: An unexpected i/o error has occurred

  ==========

  I press ESC = exit or enter = continue it tries to start, but eventually back to the black screen. So I can't pass this screen. I do not of hava a recovery for Windows disk... And the laptop is a Sony Vaio with Windows 2008. A couple of days, I have connected to my work through the laptop environment and forgot to close - battery went down--and now this...

  Can anyone help?

  Please see the message (response) by Afsal Taher:
  http://answers.Microsoft.com/en-us/Windows/Forum/all/new-computer-running-Windows-7-unexpected-IO-error/46b4fc7a-9a83-4db2-9a00-dca512797e61

• Help and Support Windows has encountered a problem

  Original title: HELP, SUPPORT, MAINTENANCE, TROUBLESHOOTING

  RUNNING WINDOWS 7 NO HELP NO UNABLE TO RESOLVE SUPPORT ISSUES. IMPOSSIBLE TO CHECK MAITANCE. GET THE ERROR MESSAGE. THIS IS THE MESSAGE I GET...

  Help and Support Windows has encountered a problem

  You might be able to solve the problem by restarting Windows Help and Support.

  If the problem persists, try the following:

  1. Search Help topics online on the Windows Web site.

  2. Contact your computer manufacturer or Support technique Microsoft for assistance. There might be a problem with one or more Windows system files or folders on your computer

  Hi Mokovdcone,

  ·        Exactly when you receive this error message?

  ·        You did changes to the computer before this problem started?

  ·        Were you able to access help and Support earlier on this computer?

  However, I suggest you look into the file Event Viewer if there are other important messages/error codes related to the issue.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You can also follow the steps below and check if it helps.

  Steps 1

  You can try to download and install Windows Help program (WinHlp32.exe) as a workaround and check it it helps solve the problem, please visit the link below to download WinHlp32.exe for Windows 7.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=258aa5ec-e3d9-4228-8844-008e02b32a2c&displaylang=en

  If you have problems when installing the Windows Help file, please see the link below.

  http://support.Microsoft.com/kb/917607

  Step 2

  You can try running the following commands in elevated command prompt and see if you can help and support the windows properly.

  Follow the steps below:

  a. open the start menu, click programs principally made, select accessories.
  b. right-click on command prompt, and then click "run as administrator".
  c. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  Regsvr32 msxml3.dll/u
  Regsvr32 msxml3.dll
  Regsvr32 /u msxml6.dll
  Regsvr32 msxml6.dll

  Regsvr32 jscript.dll
  Regsvr32 vbscript.dll
  Regsvr32 mshtml.dll

  Restart the computer and try to access help and Support.

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows has encountered a problem communicating with a device connected to your computer.

  When you start the computer laptop, windows Boot Manager appears.

  He reads

  Windows has encountered a problem communicating with a device connected to your computer.

  file: \Boot\BCD

  status: 0xc00000e9

  Info: an unexpected i/o error has occurred.

  When I I go through F8, safe mode, last known good configuration, running in debug ect mode.

  running in safe mode past with him, freezes for abit in the past to a black screen with just the cursor and the Center recovery running VAIO, last good configuration, known debug mode. This windows is loading files, then the windows boot screen were it freezes then goes to a black screen with just a cursor.

  Place the cursor, I am unable to do anything else on this screen.

  is it far from getting the laptop to function normally again or is it finally the end of his life?

  the laptop is a sony VAIO E series (VPCEA25FG) running under windows 7.

  Hello

  The error - an unexpected i/o error has occurred, status: (0Xc00000e9) is a material error in the BIOS of your computer.

  Basically, it's to tell you that the computer is not able to communicate effectively with the hard drive.

  Try the Startup Repair.  Startup Repair is designed to prevent a reinstall tedious to diagnose and repair problems that prevent Windows startup.

  To run the Startup Repair tool, see the links below for more details:

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  
  

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  I also suggest you to update the BIOS. Update the BIOS, contact the manufacturer of the system!

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  To ask your question in the Forum of Sony, refer to this link.

  http://community.Sony.com/?XID=M:header:eSupport

• Error: Copy Photos "Windows has encountered a problem wen trying to copy this file.

  original title: copy files confuses computer!

  When I try to copy photos on my drive E or D (which I've done a thousand times) it now says ' widows has encountered a problem when trying to copy this file "... What do you do? ".. . as I have a shaky choice! ' cos it gives the options... How *, it's that ' cos they must be aware of * advertising but feel so safe in their ivory towers! What's wrong. Help, please. MikeW

  There are two approaches you can take.

  One solution: you can copy files into smaller "chunks" until you identify the file that causes the error, and then try to find out what is the problem with this file.

  Another solution is to download the program "Robust copy" (Robocopy) to Microsoft and it allows to copy your files.  You download and install in the Windows 2003 Resource Kit (works fine on XP).

  Windows Server 2003 Resource Kit:
  <>http://www.Microsoft.com/en-US/Download/details.aspx?ID=17657 >

  Once installed, you can open a command prompt window (start-> Run-> "cmd") and enter the command:
  Robocopy "C:\photos" 'E:\photos' /R:5 / s
  Where "C:\photos" will be replaced by the source directory, and the 'E:\photos' is the destination directory.  the "/ S" option will copy the subdirectories and the R:5 option retries 5 times on error before moving on to the next file.  Errors should be displayed on the screen and I found errors of command line to be more descriptive than GUI errors.  There are a lot more options, but this should help you get started.

  HTH,
  JW

• Explorer Windows has encountered a problem and needs to close, sorry for the inconvenience into account only one user. Other user accounts properly.

  This problem deals with only one of my user accounts, where the user accounts function correctly.  When my wife logs in to his user account, it receives the error "windows Explorer has encountered a problem and needs to close, sorry for the inconvenience."  No ICONS or deskbar charge upward; However, my daughter and my user account functions properly.

  I did a system successfully restore to a previous point, but the problem remains.

  If you are still having problems with Windows Explorer crashing, I suggest to consider the suggestion offered by ShadowKat:

  "Hello people, it seems that some guys out there are still having trouble with this random crashes. I have the same problem, except that it happens every time that I go to my media files on my NAS. It seems that there is a bug or something with windows that causes this problem when you access a folder to storage media like mine, especially when the size of the file is very large (archive all my discs of film there for convenience and continuous =), about 1 TB of data). Windows capable of generating thumbnail images for your files and blocks the Explorer as well.

  I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).
  Source: http://www.computertooslow.com/windows-explorer-has-stopped-working.asp
  I hope this helps and good luck!
  ShadowKat. »
   
  If you're still having problems after this, I suggest that to start a new thread in the following location:
   
  http://answers.Microsoft.com/en-us/Windows/Forum/performance
   
  I hope this helps.

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Windows has encountered a problem and cannot open Photo Gallery

  Cannot open my photo gallery to see my photos.  Message States windows encountered a problem and cannot open the photo gallery. What should I do?

  Cannot open my photo gallery to see my photos.  Message States windows encountered a problem and cannot open the photo gallery. What should I do?

  Fixed problems with Windows Live Photo Gallery that does not