Windows has stopped the device because it has reported problems. Code 43 with generic bluetooth adapter.

Windows has stopped the device because it has reported problems. Code 43. Something with the generic bluetooth adapter. What should do?

Original title: Please help

Hi JovanaNesic,

One of the motors controlling the unit notified the operating system that the device has failed in some way.

Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

Follow the link below a convenience store opened.

http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

If you have already run the Troubleshooting Wizard, you can view the documentation for the hardware for more information about diagnosing the problem.

Tags: Windows

Similar Questions

  • Error "Windows has stopped this device because it has reported problems (code 43)" after the computer start in low resolution and remains after the connection

    Original title:

    Problem occurs intermittently, but almost every time at the first start the morning. The problem can be seen during the POST and the rest after logon. After several reboots, he can come good, but at the next restart could be bad. One clue is that the Device Manager said that to display card NVIDIA Ge Force 8400 GS that "Windows has stopped this device because it has reported problems (code 43)." Driver update says I have the latest driver insalled, version 8.17.12.9573. Help, please

    Have you tried to update your BIOS? Are there updates the firmware for your video card?

  • State of the device, Windows stopped the device because it has reported problems (Code 43)

    A usb driver for microsoft

    Windows has stopped the device because it has reported problems (Code 43) Standard USB HOST Controller, location of port #0002 Hub_ #0005

    Right click on desktop, select Properties.  On the next page, top left click on Device Manager.

    Scroll down the page until you come to the Universal Serial Bus Controllers and double click on this.

    Uninstall ALL USB host controllers. (Remember that when you have finished the last of them, your keyboard and mouse may not work!)  Restart the PC.  Windows should then pick up the controllers & install the correct drivers.  The only time where it will not install the drivers is when the USB host controllers are physically damaged.  In this case, the fastest and cheapest method is to buy a USB PCI card which fits directly into a PCI slot on your motherboard and will come with three or four USB 2.0 ports.

  • Unknown device: Windows has stopped this device because it has reported problems (Code 43).

    I have Windows 7 Ultimate. Recently an unknown device keeps popping up in the device manager every time that I start to win. It is reported the location is in the front USB hub, but I haven't changed it anything lately. The device status says "Windows has stopped this device because it has reported problems (Code 43)". I can uninstall or disable it but it will get picked up again the next time that I reboot. All other usb devices (mouse, keyboard, webcam, UPS APC, external hard drive, printer) work very well. How can I get rid of this nuisance so that it is not reappear?

    If the problem coincided with connecting the inverter APC that may indicate the problem is with the inverter.

    Somewhat similar situation discussed in the following link:

    http://www.velocityreviews.com/forums/t527369-APC-ups-USB-as-unknown-device.html

    Your situation sounds similar as "Information system" leading the 'problem of the device' has an error Code "this device is working properly" but still "unknown device".

    I would say to detach from the APC UPS of the computer and uninstall any software related.

    Restart the computer and see if the "Unknown device" problem resolves.

  • Windows cannot initialize the device of this hardware driver. (Code 37)

    Windows cannot initialize the device of this hardware driver. (Code 37)
    There is no upper or lower filters in reg.
    external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
    How do I solve this problem

    Hello Rajendra Aagarwal,

    Thank you to contact the community Microsoft and we will be happy to help you with your concern.

    According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

    Method 1: Run the Fixit and check

    Hardware devices do not work or are not detected in Windows (Fixit)

    Method 2: Check the steps to get the 37 error code

    Explanation of error codes generated by Device Manager in Windows XP Professional 

    Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

    Good day!

    Hope this information helps.

  • Windows stopped Toshiba Canvio external hard drive because it has reported problems (code 43 error)

    This ext drive works on a notebook of friends (windows 7) and works also on the desktop (windows XP) but work on that notebook (windows xp). I realized problems as recommended by a number of times.  Problem remains.

    Hello

    -What diagnosis made?

    One of the motors controlling the unit does not work.

    First, run the troubleshooting material the Article from Microsoft fixit.

    Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

    Failure to fix, then uninstall and reinstall the device drivers.

    1. Click on Start then RUN and type Devmgmt.msc in the RUN box.
    2. Click disk drives in the list of hardware
    3. Click on the USB external hard drive with the question and click Uninstall.
    4. Once the hard drive is uninstalled, disconnect the USB cable.
    5. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
    6. Search the external hard drive in Windows Explorer

    You can view the documentation for the hardware for more information about diagnosing the problem

    For reference:
    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

    Hope this information is useful.

  • Windows stopped bluetooth device because it has reported problems

    in my windows 7 proffessional portable bluetooth device is not working.i checked the bluetooth driver but it showing the driver is up-to-date. I also checked it the Dell Wireless 1702bluetooth v3.0 + HS property in there the general indicating that windows has stopped this device because it has reported problems (code 43). And I use kaspersky antivirus internet security

    Hello Sivan,

    Thanks for posting your question on the forum of the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    What is the model number of your computer?

    I appreciate your efforts to resolve the issue.

    This problem may occur if the peripheral equipment fails or if the device driver fails. We will work together to solve this problem.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run this Microsoft fixit and check.
    Reference:
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems

    If this does not help, then use method 2.

    Method 2:
    Please use the suggestions in this article and check the issue.
    Reference:
    Code 43: Windows has stopped this device because it has reported problems
    http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • W7 Dell Inspiron N5050, disorder of generic Bluetooth adapter; "Windows has stopped this device because it has reported problems (code43).

    I'm getting generic Bluetooth adapter, "Windows has stopped this device because it has reported problems (code 43)." It shows at the beginning > Device Manager > portable computer icon, like a yellow! -in the icon of the computer. I have and you use a wireless mouse and I don't know if that is considered to be "Bluetooth" or not. I don't have any other element without wire/Bluetooth that I use. I connect to wireless internet. When I delete the device, after a reboot it comes back with the same problem. Troubleshooting found nothing to help. I did a restore to windows from the hard drive partition, (turns out was unnecessary, problem turned have been bad screen I should have caught before to do reinstall). Month? After that this problem started. I mention this to try to be through details. I would like to remove the adapter - or - change something - or - what ever? to stop it. Thanks in advance.

    Thanks, I went to the start menu > type devmgmt.msc > left click on the result > right-click on Bluetooth radio > click left adapter > click on disable /OK. Restart and the warning went and did not return. It's not all "deleted", BUT if the warning is under control, be it. Out of sight now so happy, happy, it is me. Thank you

  • Windows has stopped this device (USB 2.0 Flash Disk) because it has reported problems. (Code 43)

    I have USB 2.0 Flash Disk of Orchid do. This device worked perfectly until I downloaded from MS Download Center "Microsoft USB Flash Drive Manager" and tried to install this. Although the program has not installed message stating that "this program is not applicable for the Version of Windows installed on your computer", but it made my flash drive stop working after the installation fails. Now, I always get error message this device driver was not successfully installed (USB device not recognized) and your USB device has malfunctioned or Windows has stopped this device because it has reported problems (Code 43). In the Device Manager under USB controllers, the device is listed as "unknown device". I tried most of the methods described in the forum, but so far none of them has proved to be successful. I will ask members of the forum of good want to let me know if my device itself has developed some defect (hardware failure) or is - having something to do with driver has been corrupted (software compatibility problem) and if so what is the corrective treatment / necessary rectification. Furthermore, I must say here that I am running Windows 7 RC OS version on my computer. Thank you best regards &.

    Hi ALOK CHANDRA SINGH,.
    If none of these solutions will not help you check this thread.

    If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

    If your issue is resolved, please indicate then your wire is with solution.

  • Windows Update has stopped working and Windows has stopped the unit, he reported problems (code 43)

    Original title: Windows Update stopped working Vista Home Basic.

    HP laptop 550 Vista home basic 32-bit.  Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.

    Hello

    Question: Windows Update has stopped working

    1. do you get an error message when you try to update?

    2. were there any changes (hardware or software) to the computer before the show?

    Perform the steps from the link below.

    The problems with the installation of updates (Windows Vista)

    Question: display Error Code 43 adapter has stopped the unit

    Run the Fixit and check if it helps.

    Hardware devices do not work or are not detected in Windows (Fixit)

    Hope this information helps.

  • I think Windows has stopped this device because it has reported problems. (Code 43) when connecting iPod to the PC.

    Original title: Code 43 problem

    iPod is no longer detected when plugged to the USB port.  Instead, I get the following error message: "Windows has stopped this device because it has reported problems. (Code 43) »

    Crisis averted!  On another head shot... I thought that maybe the problem could be in the sync cable since the Apple store employee had no problem with the iPod.  I bought a new cable and the computer immediately recognized my iPod.  The old cable is now in the trash.

    Thank you for your help.

    Bob

  • Error "Windows has stopped this device because it has reported problems. (Code 43) "when I try to plug my mouse optical usb into the USB port.

    Original title:

    First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
    and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
    (running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)

    in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
    "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
    so I click it and and called up pop-up windows
    "the usb device not recognize."
    display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
    Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
    "Windows has stopped this device because it has reported problems. (Code 43) »
    Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpg

    Also the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.

    Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...

    • Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
    • Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
    • Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
    • Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
    • Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
    • Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)

    Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)

    Hello

    The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.

    http://WWW8.HP.com/ca/en/support-drivers.html

  • Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed.

    Separated from this thread.

    Hello

    I'm faced with the same question. I went to settings of your laptop and ran the recovery, but it did not help. I went to Device Manager and I noticed an error: Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed. Tried to fix that with an alternative of Microsoft Community (http://support.microsoft.com/mats/hardware_device_problems/?wa=wsignin1.0), but the issue could not be resolved. I don't know if they are related, but I think so. Spent so much time trying to solve this problem and would be really grateful for the help. Have had the computer for less than 3 weeks...

    Ewa

    Hi Ewa,

    Thanks for the reply.

    I suggest you to update the drivers for the chipset of your computer and check if it helps. You can use the link below. Select the appropriate component and the operating system from the list. The link given below is for Lenovo 11 2 yoga, if you have any other device then please provide us with the exact model number or select the correct model number.

    http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Yoga-series/Yoga-2-11-notebook-Lenovo?c=1

    As you mentioned that the other two USB ports work correctly, according to me is not a problem with the driver. It seems to be a hardware problem.

    Let us know the status.

  • Error: Code 43; Windows has stopped this device because it has reported a problem whiel trying to use Cyberlink Webcam

    Title: cannot activate cyberlink webcam

    My cyberlink webcam was working fine until today. It will not turn on. After you apply the troubleshooting suggestions, I received a reply as follows: 'windows has stopped this device because it has reported a problem. (code 43) What is - this and how to solve my problem. I have a HP Pavilion g6. Help, please!

    Hello

    -Did you do changes on the computer before this problem?
    -What is the operating system installed on your computer?
     
    The error code you get is due to one of the engines that controlling the device notified the operating system that the device has failed in some way.
    Method 1: Run the Microsoft FIXIT from the link and if the problem persists.
    Hardware devices do not work or are not detected in Windows
     
    Method 2: Uninstall and reinstall the USB controllers
    You can try to uninstall the drivers and also scan for any hardware changes in Device Manager.
    (a) open Device Manager by clicking Start , and then type Device Manager.
    (b) expand the Controllers of Bus USB section by clicking on the '+' sign.
    (c) Uninstall each of the devices under the USB Controller section by right-clicking on each one, and then click Uninstall.
    (d) close the Device Manager and restart the computer.
    Windows RE-automatically install the USB controllers in your computer, without you having to do anything further. Your computer is now running properly USB devices.
    For reference:
    Updated a hardware driver that is not working properly
    http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

    Method 3: If the problem persists, I suggest you to follow the steps from the link and check if it helps.
    Code 43: Windows has stopped this device because it has reported problems
    http://TechNet.Microsoft.com/en-us/library/cc725873 (WS.10) .aspx
     
    Hope this information helps.
  • Port_ #0003.Hub_ #0005, Windows has stopped this device because it has reported problems. (Code 43)

    my computer did not recognize my usb to the printer device.

    Hello

    1. what operating system is installed on the computer?

    2. this printer was working on the computer before?

    3. have you made changes on the computer recently?

    4. What is the brand and model of the computer?

    5. What is the brand and model of the printer?

    Try the following steps.

    Method 1.

    Connect the printer on another computer and check if the printer works fine.

    Plug another usb printer and check if the printer works fine on this computer.

    Open the hardware and devices Troubleshooter: http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2.

    I also suggest you follow the steps in this article.

    Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

    Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Refer.

    Code 43: Windows has stopped this device because it has reported problems: http://TechNet.Microsoft.com/en-us/library/cc725873%28V=WS.10%29.aspx

    I hope this helps.

Maybe you are looking for