Windows Home Server 2003 - cannot install KB968349 (Power Pack 3)

Similar Questions

• Oracle xe + apex on windows home server 2003

  Hi, I need help.
  
  I set up a windows 2003 server and installed the 10.2 XE and APEX 3.2 db. I also configured the firewall to port 8080, 1521 (TCP & UDP) and 2030 (TCP & UDP).
  When I try to establish a connection as http://servername:8080/apex/f? p = 4550:10, then the answer is "cannot display the page. When run http://127.0.0.1:8080/apex/f? p = 4550:10 on the server, I get a login page of APEX
  
  FYI: I can connect to the database with SQL-Developer
  
  Edited by: WebMees NL on April 25, 2009 12:35

  Hello:

  You may need to allow "remote" access to the database of the XE. To do this log in the database using sqlplus under user "sys" and run

  exec dbms_xdb.setListenerLocalAccess (l_access-online false)

  CITY

• Windows Home Server 2003 mscorwks.dll is not a valid windows image

  I get the above message followed mscorwks.dll could not be loaded.

  homeserverconsole.exe - bad image is the title and the .net Framework error initialization

  I tried reinstalling .net SP but it fails, try to uninstall it says it can't find the patch.

  The data on the disks are no longer readable.

  Thanks to all those who can help you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows Home Server + Config IP/LAN WRT54G problems

  Hello

  I tried to fix this for days now, and I feel more I read on questions from other people who appear to be similar (at the beginning), I realize that I don't know even where to start... [: Confused:]

  What I know:

  I can't access my Windows Home Server from outside my home network. Whenever I have try and enter the domain name, setting Page of the WRT54G (identical to display when you enter http://192.168.1.1. inside my network) is displayed. Seems I found a way to configure my router remotely - but it's really not what I want... I rather like to access my home server, but it does not work. My LAN, I don't have a problem to connect to my server via remote desktop, but not from outside.

  I'm sure it's a (simple?) Number IP/LAN, but I just don't know how to solve. I know that something is obviously wrong with the IP addresses, but I don't know which ones to change without messing up my network, server, router etc...

  My presentation of Setup/settings:

  1.) WRT54G (v6) installed with latest firmware. Active DHCP.

  2.) HP MediaSmart Server (running Windows Home Server 2003) is configured with a static IP address > TZO domain name.

  3.) WRT54G Port Forwarding: all need ports (80, 443, 444, 4125, 3389) passed on to the Home Server (192.168.1.222)

  What strikes me (as shown in the tab "Status" of WRT54G):

  The IP address of the router is the same as my domain TZO address... is that supposed to be like that? -Need help, Pleaseeeeee!

  Q1: How can I access my home server from outside my network without pulling up the configuration of my router settings?

  Q1: which of my IP addresses & settings need to be changed... and where?

  Any help is appreciated...  Many thanks in advance!

  Armin

  Simply turn off remote access of configuration on the router or change the port that it sits on.

  The problem is that the web INTERFACE of configuration for the wrt54g is on port 80, so when you try to access port 80 (internet) outside it goes directly to the configuration UI instead of the server on port 80.

  Don't ask me where it is that I do not run firmware factory on wrt54g nmy.

  Concerning

  Fred

• How can I have my client Win8 continue to be supported by Windows Home Server v1?

  I've updated from Windows 7 to Windows 8, and now my Windows Home Server v1 cannot back up my laptop. The connector software complains about volume errors and complains about the ESM may not take a snapshot of the customer volume. Help, please!

  None of the two versions of Windows Home Server can back up systems of Windows 8. The first version of WHS is no longer supported and probably will not be updated to add this support.  Windows Home Server 2011 can be updated, the last word of Microsoft on this subject was "Stay Tuned!"

  If you want a definitive answer, post it in the Windows Home Server support forums.

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• Installation of Windows Home Server 2010 on Proliant N40L

  Does anyone know if Windows Home Server 2010 will install on a Proliant N40L without having to install additional device (for configuring SATA RAID) drivers.

  I can't install again, that my DVD drive is IDE not SATA, I'm waiting for a new. Once this drive shows up, I'll be able to find out for me.

  Well, the answer was that the installation went very well. I didn't do anything to Windows Server 2011 to recognize the RAID adapter.

• Cannot install Windows Home Server

  Every time I have try and install windows home server it goes through the windows of files loading screen, then green bars on a loading screen then nothing. Let it sit overnight and still nothing

  Running an IBM thinkcentre with a Pentium 4 processor and 1 GB of ram.

  Any Suggestions?

  Hi RonDeMuro,

  In dealing with the problem by installing Windows Home Server, I suggest you to ask your question in the Windows Home Server Support for assistance.

  Reference: Support for Windows Home Server

  Hope the helps of information.

• Cannot install the Windows Home Server Vail connector

  WHS vail connector installation

  Hello fishman6709,

  Look at the post in the forum TechNet on the WHS vail connector installation failed.
  http://social.Microsoft.com/forums/en-us/whsvailbeta/thread/a8a22981-353A-497b-8c40-1e346e514e92

  You can post in the forums of Windows Home Server for better support. http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  I hope this helps.

  Thank you

• Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

  Home built PC

  Card mother Gigabyte GA-Z77MX-D3H

  Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

  Windows Pro 10

  Windows Home Server 2011 on LAN

  I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

  All good advice?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Cannot partition on Windows Home Server

  The problem:
  We are currently the main C drive partitioned 20 GB and we cannot repartition try with several different partition tools.  The error via a tool, it's "the volume you have selected cannot be extended.  Other tools to give similar messages.  The hard drive is 250 GB RAID 1 mirror.

  What we tried:

  A suggestion according to the https://support.microsoft.com/en-us/kb/841650 does not include the home server edition so can't take the risk that she clearly serve States own risk.  We tried Acronis partition software, G-Parted, diskpart.exe command BACK and Macrorit http://macrorit.com/partition-magic-manager/server-diskpart-fails-to-extend-system-partition.html

  Other suspicious Info:

  1. System Properties window says that the operating system is 'Windows Home Server'.

  2 window Information System indicates that the operating system is 'Windows 2003 Small Business Server. "

  The person who owns that server call purchase Home Server edition.  Not sure if this is related or not, but it's conflicting information to find a solution.

  Bottom line, even if that server is outdated and not fully supported any longer, we hope to keep alive a little more long if possible if we simply repartition C drive and increase the free space.  Other than replacing the server suggestions are appreciated because they are not willing to spend the money to replace the entire server.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Installation failure of OEM Windows Home Server 2011 - network continually devices do not found/installed

  Tried to install OEM Windows Home Server 2011 integrated custom server with ASUS M489GTD Pro Mobo and AMD Phenom IIx6 1055 t processor. Installation (3 attempts) would not end when network devices do not have to be found. Having read a number of user group locations and found amount of siginficant discussion on similar type problems. Searched and copied device USB and NIC brand drivers but the installation of WHS 2011 has been unsuccessful. Have since with success installed Windows 8 Preview of consumer on the server by using 'Device Manager' to find installed drivers located in appropriate files and C: / drive. Question: a plan 'best case' would try to do a new installation install WHS 2011 on my server or to an 'upgrade' type which may keep the driver folders/files? Thank you

   

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro on Windows Home Server public. Please post your question in the Windows Home Server appropriate Forum. You can follow the link to your question:

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• installing windows home server stop error blue screen 0x0000007b

  I want to install Windows Home server on a processor intel DH57JG motherboard with a processor Intel i5 650 CPU and 4 GB of Ram Kingston.

  I have 4 2 TB Samsung than hard drives in raid 5
  To make the bootable Raid 5 I partitioned into 2 drives the first being under the 2047 GB.
  The first part of the installation went well until I asked the question of f6.
  I downloaded the driver diskette file required to Intelbut she is 3 years old and says nothing on my motherboard.
  Ignore this as I get the Blue Screen of Death with the above Stop message.
  Any ideas anyone

  Hello

  Since your question involves the use of Windows Home Server please join the Windows Home Server Support Forums. They specialize in THIS type of environment Pro and will be better suited to help you.

  Windows Home Server Forums
  http://social.Microsoft.com/forums/en/whshardware/threads

• Cannot connect to Windows Home Server 2011

  I just installed a Windows Servr Home 2011.  I can not all my clients to connect to the server.  All my customers use Win 7 Home Premium.  I can see the server in the Windows Explorer to the customer (my desktop PC).  If I click on the icon of the server, I can browse shared files.  The directions tell to connect you, enter http:/// log in as a URL to the browser. When I do that, I get a 'not found' by DNS.  I tried to enter http:/// connect as URL and he did enter the web page to download the SW to administer the server.  However, the name of the executable if the server name is used must be ComputerConnector (.exe.)  If I downloaded it using the IP address, I get the file ComputerConnector (.exe.)  When I try to run it, I get an error message that says that this name has nonstandard characters.  I renamed the file to use the name of the server and got the same error.  I assume that the name of the original file is in the header.
  I also went to (network > servername) in other devices in Windows Explorer and end up downloading a file named ComputerConnector (fe80__b487_7b89_297_e93c) .exe. I get the same error as before.
  I have the dashboard 2011 WHS connector installed on my laptop and it works OK.  Given that the office has not connected, I can't configure the server to backup my office.  It is also true for my HTPC and another laptop.
  All the computers are in the same homegroup.  I ping the server with the IP address and the name of the server.

  I'm posting this on the MSFT Windows Home Server 2011 help forum...

  http://social.Microsoft.com/forums/en-us/whs2011/threads

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• Non-native install copy of Windows Home Server

  Hi, I was hoping that someone could erase something for me.

  I have an OEM of Windows Home Server 2011 version that I bought in England, when he arrived in the post that I realized that it is a German copy, probably why it was so cheap.

  I'm not really bothered about it, if I can just change the language during or even after the installation. My question is this a problem or problem further down the line or the whole operating system will be identical to a UK copy if I change the language and regional settings?

  Any help would be greatly appreciated, I'd rather not go back if I can't.

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.