Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. "The error code is:"0xE0000 100. "

Similar Questions

• WES7: 'Windows cannot access the installation sources. "Check that the installation sources are accessible and restart the installation.

  I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."

  I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»

  I tried to do the same thing with a Compact Flash 4 GB, which contains 2 partitions: a primary NTFS defined as active and a system partition, but I got the same result. Then I tried to install it on a Compact Flash 8 GB which contains 1 single defined primary partition as active and I managed.

  Problem is that I must install on a Compact Flash 4 GB.

  Can someone help me please?

  For Windows Embedded-related problems, please post in the forum on TechNet:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded

• Download "Windows has encountered an unexpected error when you try to upgrade Windows 7 Windows XPI

  While trying to install Windows 7 from Windows XP, I get to the point where he's going to start the installation (after copies of the temporary installation files) and stop this error and says "Windows has encountered an unexpected error. To install Windows, restart the installation. "I rebooted it and have also restarted my computer all and the same thing.

  Hello

  I suggest you to check the requirements for windows 7.

  Windows 7 system requirements

  http://Windows.Microsoft.com/systemrequirements/

  I also suggest you to see link and check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 installation problems: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-installation-problems-frequently-asked-questions

• Windows Update encountered an unknown error code 6b 7.

  What is said for the most part.  I am running Vista Home Premium x 64 on a machine rather top of range (Q9550 processor, 16 GB DDR2-800 RAM, fast hard drives 1.5 TB each, etc.) -specs factory, not overclocking, or something like that.  When I try to install the updates, Windows meets an 'unknown error' (Code 6B 7).  It usually happens when he tried to update .NET - and that's why I can't use Windows Live Messenger or all the other Windows Live programs, in addition to a lot of third party programs.

  I am really lost and don't know what to do.  I asked before and told to uninstall and reinstall all the old versions of the .NET, but also warned that the process was dangerous and could cause trouble.

  Thank you in advance for any help you can offer.  If you need more information, please ask and I will answer as best as possible.

  * Title *.
  Windows Update encountered an unknown error code 6b 7. (will not install .NET 3.5 or above, which prevents the installation of a lot of other things)

  incognitoisn'tavailable,.
  I suggest that you run the following tools:
  Disk error checking

  System File Checker

  In addition, the tools above do not correct the problem, you should look at thisarticle.  If it applies to your version of Vista so I suggest try download it see if it will install.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to Windows update "windows has encountered an unknown error code: 80070490"

  OT: driver problem.

  I had an HP printer and print a report. All a sudden, it stopped printing. I thought I was out of ink. I have not replaced the ink still no draws. I bought a new printer HP think that my printer is out. I installed the HP envy 4500 and it will all do but print in Microsoft Word. I noticed when I trouble shoot it mentions a driver needing to be updated. When I try to update it will not be updated. He mentions that it is maybe corrupted give me an error 80070490 codeof when I go to windows update to update windows (the updated peripheral mention printers etc.) I tried everything I know to try, but I can't download the driver or update in windows.

  Someone please help!

  Have you tried to get your HP driver update?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&product=5304877

  http://h10025.www1.HP.com/ewfrf/wc/product?CC=au&LC=en&product=5304877

  See also:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/not-able-to-print-from-Word-to-HP-envy-4500/m-p/3785902/highlight/true#M83258

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://Support2.Microsoft.com/kb/2509997/en-AU

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
  http://Support2.Microsoft.com/kb/947821

  0 x 80070490

  ERROR_NOT_FOUND

  Windows could not search for new updates.

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• Error during installation of Windows 8 "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. »

  Original title: I can't access my pc please help!

  I recently download windows 8 ASSESSMENT and not this message keeps popping up whenever I turn on my pc.

  The computer restarted unexpectedly or encountered an unexpected
  error. Windows Setup cannot continue. To install Windows, click
  'OK' to restart the computer, and then restart the installation.

  I click OK and then it restarted my PC and came with The Windows 8 boot-up the top screen and then the same message keeps popping up.
  I need help really bad.

  Kind regards

  Darius Oisin Reyes

  Hi, Mary

  I'm using the Enterprise version that it froze during installation, so I waited around 9-10 Minutes still nothing
  so I started keys at random because I was waiting for a long time then restarted my PC and now I can't start my pc.

  >:-( >:-( >:-( >:-(

  Boot from the Windows 8 DVD or USB media that you created
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Problem with burning Audio files to a blank CD error "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"

  I recently burned music CD blank so I can enjoy some songs in the car. After that a few discs engraved with success, I received the message "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"when trying to burn audio. To see if it was the m drive, I tried to burn audio files to four separate discs and each of them had the error message. The discs are brand new and have no information on them. I do something wrong or is my burner disconnected? Thanks for all your help and your support! I hope that we can find the cause of this problem so I can continue to make the CDs.

  Consumers concerned,

  Cody bridges

  Could you also confirm that it is playing the discs ok?

  Run the sfc tool and see if it shows anything... instructions here.

  http://support.Microsoft.com/kb/929833/en-us

• __Windows Setup has encountered an unexpected error. to install the reboot, the installation error code 0x0

  I have an Asus f3sv with vista home premium (32 bit).  I am trying to install Windows 7 Ultimate (32 bit)

  During "the installation program copies files", I get

  "Windows installation encountered an unexpected error. to install restart, the Setup error code 0x0 ".

  I went through and removed all the programs windows Upgrade Advisor said that I had to delete.  disabled the antivirus and have rebooted several times

  When I tried in safe mode it says I could not install in safe mode

  When I booted from the disc in copied files, and then when I said I wanted to update to the appropriate Vista installation.

  I decided to copy the filed on the hard drive and it's vista blue screen

  I copied the files on the hard drive (in safe mode) and tried to start the installation of the copy.  I get the following error

  Windows could not create a Setup folder 0x8007000D error code

  I can find nothing in the forums with the same problem.

  Check your hard drive for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Could you try to reinstall Vista and proceed with a flat installation?

  To proceed with the installation plate, follow these steps:

  1. Insert the Windows 7 installation disc.

  2. start Windows Explorer.

  3. in Windows Explorer, click to select the drive for the Windows 7 installation disc.

  4. in theEdit menu, click select all .

  5. on the Edit menu, clickcopy .

  6. Click to select the hard disk you want to contain the flat installation files.

  7. on thefile menu, point to new , click folder , typeWindows 7 Setup and then press ENTER.

  8. double-click onthe Windows 7 Setup and then click Paste on the Edit menu.

  9. double-click onSetup.exe and follow the instructions that appear.

  For more information about dish install, please visit the below mentioned link:

  http://support.Microsoft.com/kb/928902

  Note: KB talking about the process involved in Vista, but it applies even to Windows 7.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Portege 600-Windows Setup has encountered an unexpected error - error Code: 0x0

  Hello

  During an upgrade to Windows 7, I get the following error message. Windows installation encountered an unexpected error - error Code: 0 x 0.

  Searching the Web I found the recommendations of setting DMA on optical drive (only), updated the bios (done), archiving (DVD media provided Toshiba Windows 7 upgrade disc) everything seems OK visually and by disabling antivirus (turned off AVG resident shield). I still get the same error.

  Help would be appreciated.

  Thank you

  This error message is displayed on what not?
  I did several times this upgrade successfully and without error messages.

  You have followed the instructions how to switch to Win7 using the second CD of component that removes all compatible and utility tools prior to update installation Win7?

• «.. . restarted quit unexpectedly or encountered an unexpected error. Windows Setup cannot continue... »

  "The computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and then restart the installation. »
  
  I have this error message and called technical support from microsoft, we have tried to reinstall Vista again once I had tried three times with the same error message. It would freeze to "complete installation." even let him all night to see if he needed more time to complete on its own, but nothing helps...

  the technician told me I have a hardware problem, but when I installed XP on it everything works correctly.

  It's a new pc and a clean install of Home premium. I re-post this question since yesterday

  Hi evan9074,

  So was the question then? You can run the Windows Vista Upgrade Advisor to see if there are compatibility issues that you have with hardware or software that would prevent an upgrade to Windows Vista.

  I hope this helps.

  Brian
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista - during the Windows Update, get the error "computer restarted unexpectedly or encountered an unexpected error.

  While using the computer, a message appears that says a windows update had to be so I followed the instructions and started updating.  Courses through the computer restarted, then this window will appear.  I clicked 'OK' and the computer restarted again, but now only the loops with the same message.

  The computer works fine for the past several years and I have not tried to change the settings or the operating system.

  * original title - no error number. Message says: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. to install Windows, click "OK" to restart the computer, and then restart extra

  While using the computer, a message appears that says a windows update had to be so I followed the instructions and started updating.  Courses through the computer restarted, then this window will appear.  I clicked 'OK' and the computer restarted again, but now only the loops with the same message.

  The computer works fine for the past several years and I have not tried to change the settings or the operating system.

  Hey dkeeney2330

  ·                        try a restore system before this

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. reboot your computer.

  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.

  3. Select theSafe Mode option with the arrow keys.

  4. pressenter on your keyboard to start mode without failure of Vista.

  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Vista goes into safe mode.

  6 do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that didn't he corrects not reposting in the windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Important updates for Vista SP2 Security Installation failure: update MSXML 4.0 SP2 (KB927978) AND (KB954430) security, citing error Code 652, Windows Update encountered an unknown error!

  Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!

  See the section "How to get help", for example, http://support.microsoft.com/kb/927978

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• Impossible to install KB2686827 and KB2656368, keeps telling me that Windows Update encountered an unknown error. Code 641

  Check and fix the completed transaction. All of the files and registry keys listed in this operation were repaired successfully.  But I'm not able to upgrade windows (KB2686827) and (KB2656368).  Its keep telling me that Windows Update encountered an unknown error. 641, the code Please HELP. I have Windows Vista Home Premium 32 bit. Thanks in advance.

  Original title: of my CBS.log

  Try the manual download for both method:

  Update of security for Microsoft .NET Framework 4

  Update of security for Microsoft .NET Framework 4