windows installation failed 8.1 via bootcamp

Similar Questions

• (Redirected) 10 Windows Installer failed: no video display, screen, impossible to boot-to-use computer only black

  Hi all I recently upgraded from Dell s 660 Windows 8.1 for Windows 10 PC. That part went well, no problem.

  Then, I decided that I wanted to clean things up I did a Reset, delete all settings of Windows. This ultimately failed and I got an error message that the bootstrapper has been damaged. Computer would not boot successfully.

  OK, so I decided to do a clean install to solve this problem. See the Microsoft Web site and download a tool to create bootable USB stick with Windows 10 installation files

  Then I inserted the USB in the broken computer, restarted, and the installation begins without any problem. I got all the way to the screen where I choose which partition to install the OS on. I chose the right partition and clicked ok, then leaves the room for a few minutes. I came back and met with a black screen, but the computer still worked. I waited about 30 minutes, but there was no change, so I decided to restart.

  Given zero has not set the problem. The computer always starts and I see the hard drive activity light flashes from time to time, but I don't see anything on the screen. No DELL logo at the start as there were no past, no loading spinner, nothing... Pressing F8 does not seem to help, I can't get into the BIOS or anything. I tried with and without installation of Windows 10 bootable USB inserted, does not matter anyway the result is same - just a black screen.

  I guess it could be a hardware problem, but it feels like a very large chance that my error started to arrive for the 10 Windows Installer, so in my gut, I feel like this is probably a software problem, but I don't know. I've never had problems like that until the 10th of Windows Installer.

  I have tried both HDMI and VGA ports, nor work. It has integrated video, so these ports are directly on the motherboard. Any ideas on how to fix?

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• Windows Installer fails, KB2572073, KB2572078, KB2617986 and KB2596560 with error code 1601

  Receive the following error when running automatic updates:

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2572078)
  Update of security for Microsoft Silverlight (KB2617986)
  Update for the filter of junk e-mail in Outlook 2007 (KB2596560)
  Several Windows Windows Installer launch and do not...
  Error log:
  [18/10/11, 11:03:33] Microsoft .NET Framework 2. 0a: [2] error: Installation for the Microsoft .NET Framework 2 component failure. 0. MSI, returned the error code 1601

  [18/10/11, 11:06:35] Microsoft .NET Framework 3.0 SP2 x 86: [2] error: Installation for the Microsoft .NET Framework 3.0 SP2 x 86 component failure. MSI, returned the 1601 error code

  [18/10/11, 11:09:06] Microsoft .NET Framework 3.5 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure 'package '. MSI, returned the 1601 error code

  [18/10/11, 11:09:20] WapUI: DepCheck [2] indicates Microsoft .NET Framework 2.0 a is not installed.

  [18/10/11, 11:09:21] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.0 x 86 SP2 is not installed.

  [18/10/11, 11:09:21] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' is not installed.

  [18/10/11, 12:37:37] Microsoft .NET Framework 3.5 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure 'package '. MSI, returned the 1601 error code

  [18/10/11, 12: 37:52] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' is not installed.

  Hi William_AZ,

  1. Did you the latest changes on the computer?
  2. You are able to install some other updates on the computer?
  3. You have security software installed on the computer?

  The error 1601 occurs generally if the Setup program cannot access the Windows service installed on the computer, refer to the article below and try the steps mentioned, check if it helps.

  Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

  http://support.Microsoft.com/kb/315346

• Update the window installation fails.

  I can't update Windows to work on my computer. I tried all the fixes and none of the work.  I think he can be a problem because my key SUSClientIDValidation is not defined.  All attempts to fix it also fail.

  Fix of Mircosoft even 50687.  I get the error "Troubleshooting cannot continue because an error has occurred, we are sorry, but the program has encountered an error and cannot continue.  "Please try again later".

  You can give me any help would be greatly appreciated.

  Thank you

  Operating system Windows XP Pro (32-bit) SP3

  is it relevant?

  http://support.Microsoft.com/kb/903262

• Windows installation fails due to hard drive problems

  I am trying to install windows on a laptop computer of friends who, for some reason, I'm not has no OS

  The disk hard would not appear first during the ride selection for installation showing everything missing drivers so I called a friend and he directed me to change the sata controller mode, so I changed it from AHCI to compatibility, what makes the hardrive appear when selecting disk installation in unallocated space , but windows says that it cannot install on the selected disk and that the hardware may not support this disc .then start I checked online and found a lot of options in the resolution of this problem that no working example; Clean all the diskpart commands, creating a primary partition with gparted, using dban.

  I checked my memory with the memory test gparted, but it turns out its OK

  So should what steps I take to solve this problem?

  You should seriously consider replacing the drive.  They are not that expensive and with all the work and all the time you're put everything in there, perhaps worth.

• Windows Installer fails, what will I do?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Good day everyone,

  I try to install iTunes. Here's the mesg: there is a problem with this installation package. A program required for this install to complete could not be run. Contact your personal support provider or packaging.

  then a new massege appears saying: Installer a insuficient privileges to modify the file C:\Program Files\Quicktime\QTInfo.exe.

  I also try to install firefox, but after I restarted my computer the icon become currupt saying the program was chnge or displaced.
  even in ventrilio, he is a voice chat for online games. It will install, but after, the icon becom currupt or something

  and another problem I had is when I try to uninstall a program a message will appear saying: I have no Annie sufficient to remove or modify this option. but im in my admin account on my laptop.

  I don't know what to do, I tried almost everything I know, even make F8, I tried to use: last known good config or repair your computer.

  Please help me, I can't install anything in my laptop.

  Thanks... x)

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your questions of programs, if you kindly repost in Forum Vista programs at the above address.

  See you soon. Mick Murphy - Microsoft partner

• can not start after the installation of 10 Windows via bootcamp OSX

  Hello, I need help.

  I tried to install 10 Windows via bootcamp, and I did it successfully with no problems. However, after the installation, I restarted my computer, hold down the option key and tried to boot into OS X, but it won't work. It would be a symbol that boot lead me to windows 10!

  all solutions? I do not have a backup of my files under OSX, I lose my files?

  NOTE: when I formatted the partition for windows, he said not bootcamp next to him, but it is clear that the partition that I had to format, it is the same size that I decided to make Windows when I was in bootcamp in OSX + it was empty at 100%.

  UPDATE 1: so I managed to get into the recovery of the internet and deleted the partition that had the windows and install OSX Marverix instead (temporarily) also, I fixed the hard drive MACINTOSH HD, but now I can't boot it at all when I press the option button during the priming of the mac. all solutions?

• Windows 7 fails to install completely via Bootcamp on El Capitan

  Configuration information:

  iMac: 27-inch, late 2009, with an internal optical drive

  HDD capacity: 1 TB, 593 GB available (after Windows 96 GB)

  OS: El Capitan, 10.11.2

  Processor: 3.08 GHz, Intel Core 2 Duo

  RAM: 8 GB

  Boot Camp: 6.0.1

  Windows 7 Professional, SP1, 64-bit

  


  My Windows 7 installation does not end, stopping somewhere on the last phase that says "end Installation." I had Windows 7 installed on my Mac before El Capitan has been installed and it worked fine (using the 32-bit version then - I tried too after the installation of El Capitan, but that doesn't work anymore). I did a fresh install of El Capitan that then tried to reinstall Windows 7, but nothing has worked, as shown below.

  


  I use Bootcamp 6.0.1 to install Windows 7 Professional (full version) on a DVD via the internal optical drive. Bootcamp does not offer the ability to select an ISO file. My selection select Bootcamp task shows that these two options:

  -Download the latest software from Apple's Windows support

  -Install Windows 7

  


  I chose the two options and had the software support installed on a 64 GB USB key. Since the only option after that install the software support is to stop BCA, I did. I've reopened BCA, deselected the option to download the support software and continued to install Windows 7, making the Bootcamp 96 GB partition. I chose Custom installation and formatted the drive Bootcamp. The Windows installer completes the list of things to do (copy files, extension files,...) and then recharge.  Start Windows appears, and the window displays "end installation. Now that there where begins the strange behavior, I think. It restarts again. After that the Windows splash screen comes on, the screen goes black for a few minutes and then he recharges. This happens once again, but restarting does not, as if it is hung. I even let it run all night just in case she needed some time, but I found that it is always hanging in the morning. The computer was still on and the screen was black. I rebooted by pressing and holding down the power button, Windows starts showing the splash screen becomes black and crashes. ... I started Windows in safe mode, and he says that he cannot complete the installation in safe mode. So it seems that I am stuck. During all this the USB is plugged.

  


  Is there something I need to do to have it complete the installation?

  Note that I tried to install Windows using Bootcamp several times, varying from one thing at a time. as the withdrawal of all external drives, physically disconnected from the internet (I'm using a USB adapter to Ethernet because my Ethernet port was fried during a storm), etc. I also tried different ideas that I found on the internet, but none for those who work.

  Thanks in advanced for any help.

  1 disconnect all USB/ethernet and storage connections.

  2. run the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  3 see also (they are different drivers mentioned in step 4).

  Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple support

  iMac late 2009 Windows 7 drivers

  4. the drivers referenced in 3 are not the same thing as regular drivers Bootcamp/W7 referenced in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support . The regular drivers are downloaded when you check the option to download the software in the BC Assistant.

  5. If this does not work, there is an extra step, which disables SIP El Capitan.

  This is not to point the finger at you, but it's very intriguing and fascinating as users using a 2009 (or older than 2013) Macs, wants to run W7 (from circa 2009), but running OSX El Capitan (2015). It may be due to the software requirements, ISU, Corporate guidelines, etc. And you're not the only one. I've seen users with Macs 2015 wanted to run W7 (but it is no longer supported).

• Vista SP2 Installation fails (error 800706BE Code) via Windows Update

  I am running Windows Vista Business (32-bit) SP1 and I noticed that Vista SP2 is available for download by manually checking in Windows Update last night.  After having seen that it is a large download (more), I started the download, left my PC and left the House.  When I got home, my screensaver was away and when I attamped my password to disable the screen saver and see where I was in the process of updating, my password did not work.  Then I did a hard reboot but then could not connect under my admin user account.  I've then logged in as my wife (standard user - no password) and went to Windows Update where I noticed that the SP2 for Vista Installation fails (error 800706BE Code).  I spent most of last night and all today so far tried to solve this problem.  There are several problems here... When I click on "Install" in Windows Update, I get a message of "is not necessary: 1 update" (even when I look in the installed updates it says that the update failed).  If it is not necessary, then why is it listed as an important update that must be installed?  Endless loop... In addition, I'm not a password reset for my connection because I have a password saved on a flash drive.  Then I tried using all the older passwords that I remembered and none worked.  Shift caps lock was not on either.  I've logged in as my wife, went to the Microsoft Download page and eventually find the link to download the standalone version of SP2 Vsita, but after downloading the massive file, I didn't have the right to install it because I can not connect as an adminstator!

  (sigh) Can someone please help with this?  Thank you

  Naveen,

  Thank you very much for your suggestions!  Your suggestion of restarting, press F8 and choose "repair your computer" worked.  I was able to do a system restore and I chose a date where my old password was still in use (I had just been invited to change a few days before I tried to download Vista SP2).  In addition to losing my cookies and automatically complete IE8 - everything is back to normal.  I have not yet tried a 2nd try to SP2, and I'm very hesitant to do it now!

  Thank you once again!

• Impossible to install 10 Windows via BootCamp on iMac 5K with Fusion Drive

  Hello

  I tried to install Windows 10 Professional via Boot Camp on my iMac 5K end of 2015 (version OS X 10.11) with a disc of the Fusion 2 to for about a week now. Right now I'm on my 4th or 5th try on Windows 10 installation on the iMac because each installation fails gives me an error that the drive is not formatted correctly or he couldn't find the score even though I have the selected in the list of available drives. I even went up to both to run the commands of the PART of the DISK from the command prompt in the area of troubleshooting Installer Windows 10 to format drive to NTFS instead of FAT32.

  Here are some of the mistakes that I received:

  1 Windows cannot be installed to this hard disk space. This space of hard disk is formatted with a version not support the NTFS file system.

  2. we could not create a new partition or locate an existing one. For more information, see the Setup logs files.

  I used the Boot Camp configuration application (version 6.0.1) to create a USB key after you download the image ISO from Microsoft. The USB flash drive that creates the installer will start the iMac, but I can't get past the screen "where do you want to install Windows? I tried the merge disk partitioning ways without success, beforehand, because I thought that it could cause a problem. He was left as a full drive 2 TB, or divide the flash part away and seen the almost 2 to rotation and the merger of 128 GB (flash) portion and lucky either.

  I'm full of ideas on what to try... I have loaded Windows 7 Professional via Boot Camp several times and have never encountered a problem with Boot Camp with 10 Windows so far.

  Workaround I found that worked for me was to install

  Win7 Pro 64 bit.  Then created just the Bootcamp driver USB key

  (no operating system installer).  Next I went to do the upgrade of Win10 of

  in the environment of Win7.  FWIW, I also chose to not save

  anything (new installation).

  You will need to keep the installation to make sure that you press the Option

  key with multiple reboots (why Windows still insists on this)

  and select the Windows volume to boot from.  Once all the nonsense restarts

  were carried out and finally Windows was running, I plugged it in training camp

  driver USB key, install hardware drivers and everything was good to go.

  Now, it was on an old MacBook Pro, which does not officially have the Bootcamp

  support for WIn10 if the material is quite capable.

• How to convert the MBR to GPT to work around Windows Installer error bootcamp

  Hello

  I have a problem as a previous post (8.1 to Windows Installer on iMac with drive fusion, GPT partition error):

  "Hello,

  I have tried to install windows via bootcamp on my iMac and can't seem to fix the "Windows cannot be installed to this disk. The selected disk is the GPT partition style' error.

  I successfully completed all the steps until I'm in Windows Setup and select the partition on which Windows should be installed. I get the error "Windows cannot be installed to this disk. The selected disk is the GPT partition style. "I formatted the partition, but I still get the same error. »

  Trying to get this resolved as soon as POSSIBLE. I have a MacBook Pro 8.2 (early 2011). El Capitan installed. I already disabled SIP. Try to install Windows 10, if possible, or 8.1 if and then to 10. The target volume is disk0s4. I was able to successfully create a Setup disk Windows 10 USB (even on my MBP 2011), thanks -windows-to-create-the-usb-flash-drive-for-mountain-lion-with-updated-boot-camp/ https://mihail.stoynov.com/2013/04/22/force-boot-camp-into-using-an-iso-image-of

  I tried to look around in this forum and elsewhere to solve my problem. I have met help desk 'Loner' of T and hope he can ring for my case. Here is the result of the following commands in a Terminal:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  In addition, I downloaded gDisk but I can't seem to be able to select all the options. Be waiting for instructions.

  Thanks in advance.

  Best,

  Gabriel

  Last login: my Apr 25 14:24:12 on ttys000

  dGabriels-MBP: ~ the gabrielaxel list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Axel HD 937,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft Windows 61.7 GB disk0s4 data base

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 15.6 disk1

  1: DOS_FAT_32 WININSTALL 15.6 GB disk1s1

  Gabriels-MBP: ~ list of cs gabrielaxel$ diskutil

  No logical volume group CoreStorage found

  Gabriels-MBP: ~ gabrielaxel$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1831009760 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  1831419400 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1832688936 120574048 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  262151 1953262984

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  Gabriels-MBP: ~ gabrielaxel$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-1831009760] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1831419400-1269536]

  04:07 1023 254 63-1023 254 63 [1832688936-120574048] HPFS/QNX / TO THE

  Gabriels-MBP: ~ gabrielaxel$

  Hello again,

  Due to the time constraint, I went ahead and had a run of luck the orders gdisk on mine. My Bootcamp partition is disk0s4. I get the following error:

  Complete control of the final. About to write data of TPG. THIS WILL OVERWRITE EXISTING

  PARTITIONS!

  Do you want? (Y/N): Y

  OK; new partition table (GPT) GUID written/dev/disk0.

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Abandonment of writing!

  Is it just b/c that I can't make these changes on the disk I am running off?

• Cannot install windows via bootcamp (Imac Mid 2011)

  Hi, I struggled for the last 2 days and can't seem to find how to create a windows partition and installed it.

  Note: I have a 27 inch mid 2011 Imac and run MacOS Sierra 10.12.

  I have problems with bootcamp especially at the stage of the process USB drive.

  1. I do not understand why Bootcamp assistant 2 display only tasks being #1 download the windows software and #2 install windows 10 when all apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016http ://

  

  2. I prefer to install windows 7 on my partition, bootcamp, however 'install windows 10', which means that I can't install an older version on my partition? I tried to install windows 7 via a win7 .iso file AND a win10 .iso but none of them works.

  3. whenever I try to install windows, the system do not recognize my USB (it would be with .iso win10 associated drivers or Win7 .iso. + drivers associated) and constantly asking for a disc to be inserted.

  

  My USB has been formatted through disk as MS-DOS (FAT32) volume and all utility used .iso comes from Microsoft. I don't understand why I can't have my. ISO recognized by the system.

  Help please :)

  Damien Kitsune wrote:

  1. I do not understand why Bootcamp assistant appear only the 2 tasks being #1 and #2 install windows 10 download windows software when apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016

  This is normal and expected behavior. Your 2011 Mac does not support the USB Windows installation. You must use a physical DVD burned ISO. Your Mac does not officially support Windows 10. The ISO files are available at https://www.microsoft.com/en-us/software-download/home .

  Documentation on Apple's site shows not all models. Please visit https://help.apple.com/bootcamp/mac/5.0/help/ for an older version (FC5).

• Having trouble install ISO 10 Windows via bootcamp on OSX Yosemite

  Hey, I am currently implementing 10 Windows via bootcamp and I am constantly the error message: "Boot Camp only supports installation of Windows 8 or later on this platform. Please use a file ISO of Windows 8 or later installation. »

  I don't know why I get what I just bought windows 10 hours ago and downloaded the ISO.

  Here is a link to plug my laptop: http://imgur.com/ofClWvT

  And here is the name of the file I downloaded from the Microsoft store: http://imgur.com/ml9HTcl

  This is where the error occurs: http://imgur.com/zPwAbSL

  If someone is able to help or to provide a kind of solution I would really appreciate, if theres more info required please tell me. Thank you!

  If your mac on the list https://support.apple.com/en-us/HT204990

  then maybe you need to update to osx?

• Got erro 'We couldn't create a new partition.' installation Win 8 via bootcamp

  I was installing Windows 8 pro via bootcamp on an iMac with the new installation of recovery.

  It's my fusion drive before installing windows:

  

  However, I got the following error during the installation of Windows 8 pro via Bootcamp, even though I formatted disk 0 Partition 5 Bootcamp:

  We could not create a new partition or locate an existing one. For more information, see the Setup logs files.

  

  So I have to quit Setup and go back to Mac OS X and delete the Windows via Bootcamp partition:

  

  

  Can I ask you why windows cannot be installed on this partition formatted? and how to fix this?

  (I just picked up the iMac to a disk fusion problem before installing recently: El Captian is not installed on the part SSD disk fusion after recovery of the internet)

  It's frustrating because I installed Windows 8 successfully via Bootcamp when I received the new iMac earlier.

  Advice and emergency aid are necessary!

  Thank you!

  When you say that you have formatted your Windows partition, you format you through installation of Windows (2nd screenshot)? To this screen that displays all partitions, you have chosen the one you want to install to and then click on Format for the Windows install process can format NTFS?

• Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

  Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

  How do you partition the disk?

  This is what app or OS that do you?