Windows Installer damaged, needs to be repaired

Similar Questions

• Windows installation disc needs for a new disk hard but is not available

  Hello

  The hard drive on my PC HP badly shot - he tells me I need to check for consistency, but it cannot and will not run chkdsk on a restart and will not let me create a restore disk.

  OK, I accept that I need to buy a new hard drive but I have no CD to install Win 7. The pc has a partition called "factory secctings" but it will not create a cd of Windows or a restore cd or a Sun.

  Microsoft has said that it is not available for me because my serial number includes the letters OEM. I had a case created at HP, and a person called me and said I should get the CD of the os from Microsoft, or from the store I bought from (Staples). Staples said they have no CD for Win 7 and cannot make me a. They said get them from Microsoft or HP.

  The number of cases is 3016271460

  See that I get nothing from Microsoft, HP, or Stqples. I never got a CD with the pc because, I guess, it's there on the partition to factory settings, but with the failure of hard drive I can't use it.

  All have a suggestion?

  Your hard drive can hold the DEFECTIVE SECTORS.

  The only way to get windows 7 disc is to buy a new Amazon / similar online stores / service centres.

  You can try this:

  ""http://www.sevenforums.com/installation-setup/151566-reinstalling-windows-7-a.html#post1300819 " "

  Browse the site and do the steps as shown.

• Windows Movie Maker needs to be repaired

  Hello. New Member here.

  My wife messed up Movie Maker by dragging and droppping some files. I need to know on reinstall or repair the program with the disc of the operating system. Must the whole operating system be reinstalled? I can't go back to an older version save point. We have a Dell computer if it matters. Thank you.

  Hello. New Member here.

  My wife messed up Movie Maker by dragging and droppping some files. I need to know on reinstall or repair the program with the disc of the operating system. Must the whole operating system be reinstalled? I can't go back to an older version save point. We have a Dell computer if it matters. Thank you.

  Hey jbr7646

  You can try to use the sfc/scannow command. to repair the corrupted system files

  information on how to use sfc/scannow is the microsoft below link

  http://support.Microsoft.com/kb/929833

  Walter, the time zone traveller

• After 8.1 Windows Installer, I need the updated AMD drivers

  Just finished installing 8.1 for my laptop HP Pavilion dv7 - 6157cl

  After installation, I am told that I should update the AMD drivers, etc. for the display

  So where could I download and install these drivers?

  Thanks for your help.

  Loy banks

  No problem, happy to help you! Let us know if you have any other questions.

• My Windows Installer 4.5 in Dell with Vista SP2 been corrupted; Den how?

  I wanted to install an .exe file after download and it came with the message that Windows Installer damaged. This has started happening recently and I did a search of

  Windows Installer in Windows, there are several files but probably some got corrupted or damaged. How can I repaire?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/missing-Windows-Installer-service-Vista-SP2-64bit/fab7d3ad-3e7f-413F-A2be-2dc596724573

  UTC/GMT is 00:53 Friday, may 25, 2012

• The Windows Installer

  What windows installer I need I have windows xp professional, I think he said years 1987 to 2000, I want to install programs on my computer

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8483

  This is the latest version of windows install

  What error messages are you getting?  Please provide the exact error message and the following prayer:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

   

• Windows XP Home Edition has lost drive of installation and CD Key - cannot repair windows (damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM file)

  I can't start Windows XP Home Edition at all - everything I try to do using the Advanced Options results in the same error message screen (Windows is not start because the following file is missing or corrupt...). I can't do a repair installation because my friend who has built my computer and installed my operating system lost the disc to install Windows XP Home Edition and the CD Key, I ordered. I can't find anyone else who has their record.

  Is there a way I can fix the system without the authentic installation disk files? If not, is there a way I can receive a free/good Windows installation disc market replacement of Microsoft? Also, I don't want to lose any documents on my computer in the process.

  Thanks for the help!

  Have you tried 'XP No Boot troubleshooting steps' sticky post at the top of this forum?

  As this issues happens several times a day and your system falls into any category to start, why not start there and see if that helps?

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes pulling and buttons power)

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so it must first be fixed using the XP chkdsk program and setting that may solve your problem completely, but you must start there.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD or create a bootable XP Recovery CD of Console.

  This is not the same as recovery disks that may have come to a store to purchase the system.  If you don't know what kind of bootable CD, you, do a CD of bootable XP Recovery Console and do not forget.

  You can create a bootable XP Recovery CD of Console when no XP CD is available by following the instructions in this link:

  http://www.bleepingcomputer.com/forums/topic276527.html

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

• Damaged Windows Installer? How to repair or reinstall?

  I have problems installing windows updates as well as my new security of trendmicro.  I think it's because the windows installer does not work correctly.  Does anyone know how to reinstall the windows installer, or fix it?

  My problem has been resolved by repairing the registry.  I didn't feel comfortable doing myself in vista (fix registry in XP and older OS) - I had a computer scientist to work for me to do.  I think the instructions they give you online will fix it.

  Good luck!

• Start loop repair, Windows 7, RebuildBcd said that no Windows installs?

  Windows 7 - ASUS G50 Vt - X 1 - after an uninstall of big, Windows will not go beyond the start screen. Given the possibility of using the Startup Repair, the console tells me that it cannot solve all the problems. Windows asks me if I want to use SuReP Console, it starts everything straight through. After using my installation disk to use other tools to repair, the function RebuildBcd tells me that there is no installation of Windows. I need this computer to work. WHAT I DO?

  Hello

  Start with a Windows disk.

  At the command prompt (press on enter after each)

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Very often, after the foregoing (and similar methods of bottom) you need to run
  Repair system TWICE - then run beboot towards the Windows disc and run again.

  ===============================================================

  References to Vista also apply to Windows 7.

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  This is the troubleshooting methods to try to resolve the problem:

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Fix the Vista Bootloader of Windows (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  ------------------------------------------------------------

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager (Windows 7)
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  problems starting in Windows Vista (Windows 7)
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista (Windows 7)
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information"(Windows 7)
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way to (Windows 7)
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild the Boot (Windows 7) Bootrec.exe tool configuration data use
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  =========================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• PC needs to be repaired, File: \Windows\system32\winload.exe, error Code: 0xc000000e

  I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start.  So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.

  "Recovery".
  Your PC needs to be repaired
  File: \Windows\system32\winload.exe
  Error code: 0xc000000e
  You will need to use the tools of recovery on your installation media, etc...

  Press Enter to try again

  Press F8 for startup parameters

  Press F9 to use another operating system.

  It allows me to boot from another HD after pressing F9 several times.

  Any advice would be appreciated.

  Kind regards

  Anthony

  I had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
   
  Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).

  Choose your language. Click next
  You will now see install in the center of your screen. On the lower left side you can see fix your computer.
  Choose repair.

  You will have several options, including:
  Refresh your computer
  Restore your computer
  Advanced options

  Choose Advanced Options.
  Launch the command prompt
  Enter the following commands one at a time who hit enter after each command.
  Bootrec /scanos
  Bootrec /rebuildbcd
  Bootrec /fixmbr
  Bootrec /fixboot
  Restart the computer once the last command finished

• BCD needs to be repaired Windows 8

  Hello

  I am trying to solve this problem, a few minutes ago, I walked into the installer of Windows 8 by USB and he said that he could not install the disk and repair.

  Now if I try and come back in the USB bootable he launched just up an error saying:

  Recovery

  Your PC needs to be repaired

  File: \Boot\BCD

  Error: 0xc0000098

  Now looking at these errors we just said to run the recovery media. I try and I just get the error again and again recovery screen.

  I moved the USB at the top of the boot order and tried to manually switch to it, just reocvery error page every time!

  Help! His work the laptop!

  Hello

  If it is a fairly recent machine, it probably uses UEFI BIOS...

  If this is the case, you might look for some type of selection for the flash drive UEFI BOOT instead of simply select the USB port...

• Can I do a repair disk for my 10 boot camp windows installation?

  I installed boot camp using the boot camp assistant and not from my own installation disc.  It is provided in the boot camp assistant.  Sometimes I can't start windows and getting a bad_pool_header error.  I am asked to insert an ERD.  How can I make or get a repair disc?  When I open windows and try to make one, I am informed that I can not with this version of windows 10.

  There is no repair under OS X disk to repair Windows. You must use your Windows installation for this disc. Or find a Windows program for such a purpose.

• HP15: Hard drive HP 15 '' have got damage. Can I have the HP windows installation disc?

  Hello

  Drive hard HP laptop 15 my son received damage after a small fall. I tried to reset the player, but that did not work. Can I have the HP windows installation disc?

  OK, great.

  As I posted yesterday, it is important to get the right of # model because the recovery media works on the model so that it is designed.

  To order the recovery media, click on the link below.  Select W8.1 operating system from the menu drop down.

  The link to the order recovery media is the last element of the page.

  http://support.HP.com/us-en/drivers/selfservice/HP-15-F000-notebook-PC-series/7137590/model/7311084

• the location where the Windows Update stores data has changed and needs to be repaired. How to repair?

  This statement appears when the windows update don't load new updates.  In addition, I can't turn on Windows automatic updates. Windows XP SP3

  This statement appears when the windows update don't load new updates.  In addition, I can't turn on Windows automatic updates. Windows XP SP3

  Try...

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

• needing a floppy disk for windows 7 64 for a 7 presario cq57 windows installations

  Help! My laptop Presario CQ57 was in the middle of doing some updates when I had a power outage and now it won't do anything except tell me that I need a Windows installation disc. Where can I get one?

  Hello

  You are welcome

  If you use the recovery Kit, you won't need the product key - activation occurs automatically.

  Kind regards

  DP - K