Windows Installer error saying that my drive's mbr, although it is really TPG.

Similar Questions

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  Hello

  You can use the Windows 8 Compatibility Center to find out if a device is compatible.

  Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
  http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/home

  FAQ - Windows Compatibility Center:

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ

  Concerning

• I had a hard drive crash and had to move all the data again. Now, I get an error saying that my Visa is not an authorized version. How can I find the product key to reactivate?

  Vista Product Code question

  I had a hard drive crash and had to move all the data again.  Now, I get an error saying that my Visa is not an authorized version.  How can I find the product key to reactivate?  I don't have the sticker on the back and the software I have does not have the code?  I bought this laptop DELL at Best Buy a little more than a year.

  Thank you.

  Hello

  This problem may occur if you make a significant hardware change. See the link provided below.

  Error message when you start Windows Vista: "your activation period has expired".

  http://support.Microsoft.com/kb/925616

  If the OS came preinstalled Dell you may need to contact Dell technical support for assistance.
  http://support.Dell.com/support/topics/global.aspx/support/win7_support/win7_portal?c=us&CS=04&l=en&s=BSD

• Lync 2010 won't download - error says that it requires Windows 7

  Lync 2010 won't download - error says that it requires Windows 7 BUT I HAVE WINDOWS 7!

  Very frustrating. After the use of Lync 2010 for the last year, he made a self-introduction to date and in a first, told time that a file was missing. So I uninstalled and reinstalled and now I am told that "only windows XP3, Windows Vista and Windows 7 are supported. Please update your PC"but I don't have Windows 7.

  Yes I know it's old. My new PC is sitting here waiting for me to move, but that cannot be done for another month or two that I need to more memory in it. In the meantime, I need to get my Lync 2010 works again.

  Any help is greatly appreciated!

  Hello Susie,

  Thank you for your response.

  I hope you've got the resolution of the question in the forums of Lync.

  However, if the problem persists, I suggest you to try the steps in this article and the Coachman.
  Reference:
  The Lync 2010 installation did not finish using Windows Installer (MSI)
  http://Support2.Microsoft.com/kb/2477965

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Thank you

• I try to install from a CD of lightroom 6 on my win7 64 bit pc, but gets an error saying that windows vista is not supported?

  I try to install from a CD of lightroom 6 on my win7 64 bit pc, but gets an error saying that windows vista is not supported?

  Thanks a lot to point me in the right direction. I live in the Denmark and the Danish version of Win7 64, I was able to install from a CD LR6 after choosing not win 7 (was not available), but (if I remember) "no specific compatibility. After installation I clicked on LR6 and changed the favorite to Win7 program compatibility.

  Best regards

  Aage

• I can't download and install updates to Windows or games on the internet. I get an error saying that I am not on the internet.

  I can't download and install windows update or games on the internet, I get an error saying that I am not on the internet, when I help

  Trinity

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. what version of Internet Explore do you use?

  Method 1:

  If you are using windows 7, I suggest you check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  I suggest you of due to windows update, please see the link.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Method 3:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• While im trying to install WMP 11 in my starter of windows 7 there is an error saying that "UPDATE IS NOT APPLICABLE to ONE COMPUTER"... Why is it so?

  Problem:

  When installing wmp 11, I encounter an error saying that the update is not applicable to your computer... can someone help me with this problem?

  Unless it's a computer N Win7 or NK, WMP 12 is already installed on your new computer, Judd. To enable access to WMP 12 (turn it on), see http://windows.microsoft.com/en-us/windows7/Turn-Windows-features-on-or-off ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is

  Help, please? I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is corrupted. Help please! I'm paralyzed!

  [Double question deleted... it is an open forum for other users (sometimes Adobe) answer, not Adobe support...] MOD]

  The best option would be to contact the technical support that can remote into your machine & troubleshoot it. Contact the customer service

  Concerning

  Stéphane

• I have a black and white 2 on windows installation error 7...

  I have a black and white 2 on windows installation error 7...

  things are running smoothly for me until the last part... that says "black and white 2 cannot install. your system has not changed. Re-run the installer to try again. "Error: the filename, directory name or volume label syntax is incorrect"

  guys what should I do... Please help me... I like this game very much

  I tried to disabled my firewall and antivirus to install this game... OO with regard to the compatible thinggy that I n tried yet coz I can't even install the game in my lappy windows7...

  
  

  guys what should I do... pls help >< i="" love="" this="" game="" so="">

  If it isn't your game, then the Compatibility Center W7 says that is not compatibile. But it seems there are other versions that can run.

  Make sure that your installation discs (if his coming to a CD/DVD) are all the scratches/dirt free and clean. A bad scratch or dirty mark on a disc can cause 'odd questions' sometimes.

  There are a few things to try:

  1. find the Setup program you are running for the game and which run in XP compatibility mode.

  2 in case of failure too and then try to run it in XP Compat mode and as administrator.

  I noticed there are a few paths on the www, if you get it installed, it may be an idea to get patches and install them to the best game(check AV before installing).

   

• When I click on Windows Update, he says that he cannot work and maybe I have to restart the computer.

  Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?

  Hello

  
  Method 1:
  You can run the fixit. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can run the fix provided in the link and check out them.
  Resolve security issues to protect and secure Windows automatically
  http://support.Microsoft.com/mats/windows_security_diagnostic/
  Method 3:
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.
  Method 4:
  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• I would like to install my Acrobat 8 Standard on a new laptop (Windows 10) I bought to replace my desktop model existing (Vista). In the process of establishing a window pops up saying that necessary files "the file"Adobe PDF.dII"on Windows Vista is requi

  I would like to install my Acrobat 8 Standard on a new laptop (Windows 10) I bought to replace my desktop model existing (Vista). In the process of establishing a window pops up saying that necessary files "the file"Adobe PDF.dII"on Windows Vista is required. Type the path where the file is located, and then click OK". What should I do to work around this problem. According to the agreement of the user, I should be able to install the program on a second computer.

  If you are using an installation disc, copy the contents of the drive in a desktop folder and install from this directory.

• My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

  My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.
  
  You can also remove active - update.xml, or even updates.xml (stores the history of update).

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Connection Manager HP stopped responding + Windows Installer Error 1719

  I am running Windows 7 (SP1) 64-bit operating systems.
  
  Started getting an error message of connection manager HP "HP Connection Manager Service has stopped responding.  Error code 8008005.
  
  HP Connection Manager v4.1.23.1 running.
  When I try to install a new version of v4.4.10.1 (SP58930) HP connection manager, I get an error of Windows Installer 1719.  Tried different solutions recommended for this, but nothing has worked.
  
  I see in the forum after this uninstall of the current version and then install the new version of the HP connection manager can solve my original problem.
  
  Before uninstalling the currenet HP Connection Manager version, I wanted to be sure that I will be able to install the new version without encountering Error 1719.  I don't want to be in an even worse situation of not being able to the HP Connection Manager after you uninstall it.
  
  Can I get confirmation from HP that I will be able to successfully install a new version after uninstalling the current version?

  ParryJM wrote:
  

  A ran the Microsoft Fixit then tried to install it and got the Windows Installer Error 1719.

  Then uninstalled HP connection Manager.

  Tried to install the HP (SP58930) connection manager and still have the error Windows Installer 1719.

  What do you suggest I try next?

  The fact that HP Connection Manager is no longer installed, how this will affect my computer?

  The fact that it is no longer installed will have no effect on the functioning of your laptop and none on the operating system.

  HP connection manager is simply a utility assistance for people who are making it difficult for the network through conections wifi and bluetooth connections.

  If you are not in this group it is really useless.

  From your description, it seems that if you can't follow instructions in the Microsoft fixit to the letter. By using the fixit is the easiest way to remove the registry entries and make changes to the registry that will allow installing and uninstalling software.  I can't recommend the methods that I use personally when I run on these issues because they involve access to the registry via regedit. The word people have never even heard of Regedit. Using Regedit can be a very bad thing for someone not experienced in the use of the registry editor.  All ch = angels did take place immediately and which included all the mistakes made during the access to the registry. Ongoing work on an operating system can fairly easily through the registry editor. Try the Microsoft fixit. It is a safe utility. Use it after an attempt to install and leave the window open until after error that does compete with the installation of the software.

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner