Windows Installer insist on not requested installation applications

Similar Questions

• Windows 8 store does not install any application

  Hello Microsoft. My name is Mikado and I own a dell pavilion g6-2301ax. It comes with a windows pre-installed 8. The problem ive had to deal with is that the store windows does not install any application. After you download the application, it displays a message that the application could not be installed. The same thing happened with the update of windows 8 for windows 8.1.  Could you please help me with how I can solve this problem

  Thank you citrus but it was actually the firewall in my system that it blocked. I had to install the BFE service that does the work. Now I can install any application from the store windows.

• Whenever I try to log into Windows 7, do error not "a win32 application.

  http://sdrv.Ms/UOUlf5

  I get this error whenever I connect to Windows 7.
  RunDLL
  There was a problem starting
  C:\Users\Home\AppData\Roaming\wgrer.dll
  C:\Users\Home\AppData\Roaming\wgrer.dll is not a valid Win32
  request.
  I don't think I installed anything out of the ordinary, and everything that I use works fine. Other than this discomfort every time that I log everything seems normal.
  I can't find this particular file through Windows Explorer but it is there if I search in CMD.
  He's trying to load it says it might be important, so I'm reluctant to delete.
  Any suggestions?

  Wgrer.dll is not a part of Windows.  You can use MSCONFIG to see what will be started when you start.  Hold down the Windows key and press R.  Then type MSCONFIG and press ENTER.  Click the Startup tab and you will see a list of startup tasks.  If you can find it here, you can disable it.  Just pay attention do not turn off your antivirus.

  Good luck.

• This installation package could not be opened. Contact the application vendor to verify that this is a valid windows installer package when you perform an installation of 2013 Pro Evolution Soccer

  This installation package could not be opened. Contact the application vendor to verify that this is a valid windows installer package when you perform an installation of 2013 Pro Evolution Soccer

  Hello

  Are you using an installation disc or try to install from a download online?
  Visit the game manufacturer if your computer meets the minimum requirements to install the game. You can also contact for a solution to the question you posted.
  https://www.Konami-pes2013.com/en/

• C:\Windows\Installer\{91120000-00CA-0000-0000-0000000FF1CE}\wordicon.exe is not a valid Win32 application

  C:\Windows\Installer\{91120000-00CA-0000-0000-0000000FF1CE}\wordicon.exe is not a valid Win32 application

  I get this error message whenever I try to open a Word of my email document

  Hello

  1 are there any changes or updates made on the computer?

  2. not the problem only occurs for a specific document or all documents?

  3. are you able to open documents saved on the computer without any error message?

  4 are you facing this problem to a particular email?

  Method 1:

  I suggest that you try to download and save the document on your computer and then try to open it and check if it opens.

  Method 2:

  You can try to create a new user profile and check if the problem persists.

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.
   
  Reference:

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  Also start a Microsoft security online on the computer Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

• Error message says: this patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package

  Original title: uninstall the program... Error message says: this patch package could not be opened.  Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package__

  I'm trying to uninstall Microsoft Silverlight. I used Windows Installer found in the control panel to delete, however, when I try to remove the program I get the error 'this patch package could not be opened.  Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.'

  The program itself shows is no longer in my program list, and when I visit the Silverlight Web site may not detect an existing version on my system. But when I try to download the latest version, that he says could not be installed because I need to remove the previous version first... I'm going in circles and get no where... I downloaded Revo Uninstaller Pro but it also had no effect... I'm stuck!

  Hello

  The issue of Windows 7 you have posted is better suited for the public on the Silverlight Forum. Please ask your question in the forum Silverlight Installation and configuration.

  http://forums.Silverlight.NET/forums/13.aspx

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• This installation could not be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.

  Windows 7 error message when install Java or Itunes 'this facility not could be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.

  I have a new machine and some programs I download it stops me in my tracks. It only allows me to install updates of Java or I Tunes?
  Help

  Rather than run the program from its current location, make sure that first save you it to your hard drive and then run Setup from there.

• After uninstalling printer Windows Installer and Microsoft Office error "this update package not could be opened"

  Original title: Windows Installer and Microsoft Office problems after you have uninstalled the printer

  I tried to install more than one printer, a HP Photosmart C4280 by downloading the drivers and updates on the HP site. I uninstalled the printer after it failed to scan a document and I had no more use for it. Then the trouble started. When I tried to open some programs (iTunes, Skype, etc.) for the first time after the uninstall of the printer, a window "Windows Installer" popped up. After you have configured Windows Installer, the program would open normally. However, when I try to open any Microsoft Office programs (Word, Excel, etc.), Windows Installer appears, but it turns into a window that reads:
  "This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. »

  Microsoft Office programs are open at all, and I desperately need my programs of Microsoft Office to work even faster. I would appreciate it if Windows Installer will stop trying to configure when I open a program also. Can someone help me please?

  Hi Jennifer7,

  It is sufficient to indicate the complete error message you receive.

  Method 1: To solve the problem of Windows Installer, follow the steps

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2: Follow the steps mentioned in the article below which addresses Office question

  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "" the installation source for the product is not available".

  http://support.Microsoft.com/kb/932857

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If the question of the Office has not changed, you can post your request in the Office forums for more specialized help.

  Office forums

  http://answers.Microsoft.com/en-us/Office/Forum/office_install?page=1

• Windows Installer pop ups appear whil running my application

  I am currently doing demonstrations ThinApp.  I was able to create simple applications (IE7, 7Zip, ect) but I have a problem with a more complex application.  The application I'm talking about is called Raisers Edge (not sure that matters).  When you run the installation executable, it seeks the prerequisite applications, installs what you need, then installs the main application.  There are the prerequisite applications so that it checks MDAC 2.8, Dot Net 2.0, VB 2627.01, Crystal XI Runtime.  We always run quite a few Windows 2000 machines so I created the ThinApp on an own W2K VM.  The application runs, but I get these Installer Windows pop ups every time that the application loads or I make a request.  The pop - ups more like hot flashes that disappear without closing them.  I do not see the same condition on the machine that I captured the installation on.  The package is large (1.6 GB).  I don't know if it's part of the problem?

  If I remember correctly, you can add:

  VirtualizeExternalOutOfProcessCOM = 1

  to the package.ini and it will work. If not, try = 0.

  Kind regards

  Christoph

  Don't forget to assign points if this answer was helpful for you.

  Blog:

  http://Communities.VMware.com/blogs/Dommermuth | http://www.thatsmyview.NET/

• Windows Installer does not.

  How can I fix the problem of having my Windows Installer not installed correctly?

  Hi Thomas,

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with Windows Installer. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this problem.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the error message that is accurate or complete?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. when exactly you receive the error message?

  4. do you have problems in installing or uninstalling any software application?

  Please follow the steps below and check if that helps.

  Method 1:

  Unregister and register again the installer of Windows:

  (a) click Start, click run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.

  (b) click Start, click run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  Method 2:

  Restart the Windows Installer service:

  a. click Start, click run, type services.msc and press on Enter.

  b. right-click on Windows Installer and click restart (if reboot option is not highlighted, click on Start).

  For reference:

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003:

  http://support.Microsoft.com/kb/315346#Method2

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Error: "Windows Installer is not installed properly' & error code Ox641 for Windows Update.

  Original title: my "Windows Installer is not installed properly.

  I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Reference: You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Error message "Could access the Windows Installer Service" when you install the application

  Hope the helps of information.

• Click right on opens the windows installer trying to install Acrobat and other applications. What ca I do you?

  CPU Athlon II Windows XP, card mother Asus V8V. Registry is overlaoded? After 8 years. It applications ar that I don't want to give up. For this purpose, I do not reformat the HD 320 MB.

  Hello

  1. you did it before the issue of any material changes or software?

  Method 1: Boot your system in clean boot mode, and check if you face the same problem. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Download the latest version of Windows install and install it. Let us know if that helps.
  Windows Installer 4.5 is available:
  http://support.Microsoft.com/kb/942288

  Method 3: Unsubscribe and re - register the Windows Setup program.

  a.Click Start, click Run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.

  b start, click Run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  c.Try your application based on Windows Installer again.

  Method 4: We will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: You can lose data while removing malware from your system.

• !!!! NEED HELP URGENT! Cannot / uninstall ArcGIS Desktop: "error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personal or package.

  I use a 2005 Dell Precision 670 with OS Microsoft XP Professional x 64 Edition Version 2003, Service Pack 2.

  I tried to update my version of ESRI ArcGIS Desktop v9.3 to v9.2, but in the process of uninstalling v9.2 there error/corruption (although at the time, I don't remember getting the error messages).

  Symptoms were: program icon not slot "start > programs" or less "C; "" / Program Files "C:/Program Files (x 86) or ' but the icon still appeared in the list of installed programs in"Add or remove programs ".

  Suggestions to be by ESRI:

  -Re-registration of the service Windows Installer - Ran fine, but the error still there.

  -File system - fine Ran but error checker always run here.

  -Downloaded Windows Installer cleanup - NO error found.

  -Downloaded CCleaner - NO error found.

  -Manually deleted the program, manually remove the following program files: C:\program files\arcgis; C:\Program Files\Fichiers files\esri. C:\Documents and setting\%user name%\application data\ESRI

  -Manually remove ESRI records in the registry: I did it by start > run REGEDIT [press ENTER], then navigate hkey_local_mahine/software and sailed to hkey_current_user/software.

  -Tried to repair the program from the installation disc, but it always seems to grind to a hault about 50-75% through the configuration of the repair procedure.

  -Tried to uninstall the program with the vision more recent ArcGIS Desktop but I still get the ERROR 1721.

  I was once in contact with the package vendor (ESRI) UK support team and they sent this problem at their headquarters in the States.

  I'm really at a lost as to how this can be fixed, because this program is what I use for my career! Help, please!

  This may be a day late and a dollar short, but there is a question we've seen recently with ArcGIS facilities.  There is a registry change to ArcGIS that limits the size of the regestry and NOTHING prevents installation once this limit is reached.

  Do the following reg key change:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\RegistrySizeLimit

  Update the value ffffffff

  Restart the computer.

  Here is some info on this registry key: http://support.microsoft.com/kb/124594

• Microsoft Visual C++ 2008 Redistributable Package (x 86) does not open with Windows Installer

  Using Win XP Service Pack 3. While trying to install a 3rd package of the party that informed me that MS Visual C++ was either absent or damaged. So I downloaded vcredist_x86.exe. When I tried to open it, Windows Installer came and demanded that I insert a CD for the file that Win Installer, should be in the format of .msi file when you locate the file.

  How can I bypass Win Installer or how Win Installer stop demanding leader .msi format when the file format is .exe. If not, how can I get the self-extracting vcredist_x86.exe program without using Win Installer?

  Thank you.

  Hello

  Windows Installer is required to install any application on the system. If the Windows Installer is damaged, then you cannot install any application on the system and .msi is the extension of the Windows Installer file.

  ·        Where you downloaded the Package redistributable Microsoft Visual C++ 2008 (x 86)?

  ·        Apart from that, you are able to install other programs on the system without any problems?

  ·        What is the exact error message that you encounter during the installation of the file?

  Method 1:

  I suggest you to download the Package redistributable Microsoft Visual C++ 2008 (x 86) from the link below, and then perform a clean boot and then try to install it on the system and check if the problem is solved or not. Follow the steps mentioned below.

  Step 1:

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=en

  Step 2:

  Perform a clean boot on the system. Follow the steps mentioned in the article below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Step 3:

  Then install the Microsoft Visual C++ 2008 on the system and check if the problem is resolved.

  Method 2:

  It could be that the Windows service install does not work on the system. I suggest you follow the steps mentioned in the article below.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Windows Installer appears when not claimed after you install the new printer.

  I installed a Canon S400 printer and now when I open a folder, file or no matter what shortcut (either by double clicking or right click Open) MSI is trying to install one of the two applications PDF I had already installed. After canceling the installation program, the file opens. How can I fix? I am running Windows XP SP2. Please do not say reinstall applications, I have uninstalled them because they proved to be useless junk.

  If you don't want to reinstall applications, then use the Windows Installer Cleanup utility to remove these entries.

  Clean Up MSI (Windows Installer) - http://support.microsoft.com/default.aspx?scid=kb;en-us;290301

  MS - MVP - Elephant Boy computers - don't panic!