Windows installs 3/3 stakes to date "do not turn off your computer.

Similar Questions

• Windows-configuration updates step 3 0f 3 - do not turn off your computer

  Help please before you take a hammer to the laptop. The update seems to be in a loop and for 3 days I wasn't able to stop or delete it. I turned off, left running for hours on end and tried everything I can think of. How can I erase this. I'm not very good with computers, so maybe it's a simple answer then excuses.

  MB

  some suggestions in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-configuring-updates-stage-3-of-3-0/18b07caf-8749-4834-955c-78e7cd211146

• Default configuration of the windows features. Restoration of the changes. Do not turn off your computer... HEEELLLPP!

  After restart my Asus X55oE due to necessary updates, I got «default configure features windows.» Restoration of the changes. Do not turn off your computer. After reading several messages through other forums, I turned it and then turn again only to receive the same screen. Some of these forums say that it can take 2 hours or more because of so many updates made at the same time. I think I was trying to upgrade windows 8 for windows 8.1.

  I'm really worried about it just because I just got back this PC from ASUS and am needing to work. Can someone tell me if there are other options or make sure that it just take a while? I also read that you can actually go to the control panel > windows update > help to erase mistakes. Also, someone said that you can customize the number of updates at a time can be both. I certainly do not happen again. Help would be greatly appreciated. Thank you in advance!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions while, Windows 8.1 in the computer installation.  We are happy to help you in the matter of fixing.

  You can try to follow these suggestions mentioned in the Microsoft article below to solve the problem with the installation of Windows 8.1 because Windows 8.1 is also an update for Windows 8 and these suggestions would help you with the same.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If this does not help then, try to disable anti-virus and see if that helps.

  Disable the anti-virus software

  (Also applies to Windows 8 and 8.1 of widows)

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Note : Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• New notebook ASUS Windows 8 by displaying "features of Windows Setup that are 100% complete do not turn off your computer.

  Since the purchase of my new laptop ASUS Windows 8, it took nearly 10 hours to install the 42 "Windows updates", and 22 "Apps updated and running a restart where"configuration Windows 100% full features do not turn off your computer"sitting on my screen for 40 minutes." I can't believe this is the technology of 2013. I'm afraid how long it will take to install Office - can I take the computer back to the seller?

  Hi Duncan,.

   
  I imagine the inconvenience that you are experiencing.
   
  Method 1:
  Start the computer and follow these steps to restore health:

  a. press the Windows key + X.
  b. open Prompt (Admin) command.

  c. type dism.exe / online/cleanup-image /restorehealth and press ENTER.
   
  Method 2:
  I suggest to refer to the section my computer crashes or freezes when it installs the updates and run the fixit the link:
  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286#top

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   
  Method 3:
  Check out the link and follow the steps in the article:
  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  Note: It is strongly recommended that you back up all your personal files.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• "failed to set up the windows updates. returning from changes. do not turn off your computer.

  Hello

  I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
  I have updated with the SW update
  The results of the troubleshooting online are:

  Problems encountered:

  Recent updates - not fixed installation problems

  Search for missing or corrupted - files detected

  Some security settings are missing or have been modified - fixed

  Registration for the service is missing or corrupt - fixed

  Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

  I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
  One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

  Hello

  Thanks for trying to help. Now my computer seems to be up-to-date.
  I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
  I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
  I did IE default web browser I have prob changed when I got to the computer.
  I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
  I ran the reset troubleshooting of Windows with the same result as before is to say:
  Recent updates - not fixed installation problems
  Search for missing or corrupted - files detected
  I think I have restarted my computer at this stage and then tried to update again.
  It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
  Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
  Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
  Thank you.

• What should I do when Windows Update is blocked for 3 days, saying "do not turn off your computer.

  Windows Vista Home, automatic installation of updates 3 days ago, when it froze. He said 'do not turn off your computer', but ctrl + alt + delete does not work, so what do I do? I can't use all the controls while the update is frozen. If it's a difference, it is stuck on that updated 3/3 to 66%. Thanks in advance.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/computer-freeze-during-Windows-7-update/8968dba7-1e08-4594-bd49-3559d49c6cfe

  08/13 / 1115:29: 13:00 HTC

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• Update error configuration Windows Updates... Do not turn off your computer. This is immediately followed by the default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer.

  OT: Windows Update failure 8.

  I recently re-installed Windows 8 using an old product key once I updated my PC using Windows 7 due to failure to boot Windows Technical Preview. The installation went smoothly, but when installation is finished, he told me that I had installed updates, for the most updated security. I installed them and restarting my PC, he has said configuration Windows Updates... Do not turn off your computer. It is immediately followed by updates default Windows configuration . Restoration of the changes. Do not turn off your computer. It accomplishes this task for like 10-15 minutes and then finally starts. Once my PC starts, this cycle starts again. So far, happened 4 times.

  Could someone please fix this? I want to update to Windows 8.1, but could end up, I'm stuck with Windows 8. (Also, why download from the store disappeared? "I'm not using a RT system).

  Thank you!

  -me15prg9926

  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

• Default configuration of the Windows, restore features changes, do not turn off your computer error/loop - failed to get on the desktop

  Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast.

  When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours.

  I wonder how can I fix? I tried it turn on and turn off, but the same problem persists.

  It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop

  Any solution please?

  Thank you

  Hello

  I'll get you the link and restore your computer to a previous working state.

  http://support.Microsoft.com/kb/949358/en-us

  Please reply with the status.

• Default configuration of the windows updates. returning from changes. do not turn off your computer. (Infinite loop)

  Problem:

  • Computer: Lenovo N580
  • Windows 8
  • Reset my computer to factory reset
  • All my files uploaded to the computer
  • Launched about 120 windows updates
  • Now, the computer is stuck on the blue screen with the message that seems to never go "failed windows update Setup. returning from changes. do not turn off your computer"I can't access the login screen or any screen to disable the windows update.
  • I tried the solutions posted by other users with the same problem but without success.
  • Please help me with a solution where I don't have a factory reset because I don't have another copy of all my files!
  • Also, is there a way to access a safe mode on Windows 8? I tried F8 or SHIFT + F8 after starting, but nothing happens. I read a post online where Windows 8 have removed this feature. Is there another way?
  • Help, please! I AM ETERNALLY GRATEFUL!
  • THANKS IN ADVANCE!

  See: http://support2.microsoft.com/kb/949358/en-us (run a system restore)

  Perform the system restore from the recovery of Windows and check.

  (a) once you start your computer by using the Windows DVD or disc repair system, a black screen is displayed with the gray text "press any key to start from the CD or DVD. Press a button on any.

  (b) select the correct time and type keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select System Restore.

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Reference link:

  How to refresh, reset or restore your PC.
  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  If you don't have disc to install Windows or the system repair disc, contact the manufacturer of the computer.

  You can also refer to:

  How to create the installation media for a PC refresh or reset:
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Error in Windows 8 update 'failure Configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  When I tried to update my PC it showed an error after restarting, "failure Configuring Windows updates. Restoration of the changes. Do not

  Turn off your computer. I tried again after the reboot. Then after reading on some forums, I ran Windows Update diagnosis and these are the errors I got:-
    
  Help, please!
  Thank you

  Hi Rishwajeet,

  Are you able to boot to the desktop?

  If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen.

  I suggest you try all the steps which are names like Windows 8 from following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/en-us

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post. We will be happy to help you.

• Windows 8.1 message 'you could not complete updates, by undoing the changes, do not turn off your computer.

  Greetings,

  I installed updates in my Windows 8.1 partition.  Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours.  I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered.  I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5

  How can I fix this without wiping the Windows partition and lose my software?

  Thank you!

  Have you created a Windows system restore point before the upgrade?

• Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer

  Hi, I just refreshed my laptop that I got a few drops FPS at random. Initially, it worked fine, but after a while before instaled Norton started to cause me problems. At this time I uninstalled it and when he asked me to computer restatr now, I did. Now I'm stuck with this message window loading. Restart the computer from time to time, but the message is always the same: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer.
  Computer: hp pavilion n006sm
  Operating system: win 8 pre-installed
  At the moment I'm stuck on this window for over an hour and nothing has changed

  Seems that problem solved by itself. As I correctly uninstalled Norton, I just put my automatic updates and restarted my laptop again. He installed the updates with no problem and its working fine. Seems that Norton was really the problem, will keep you informed.

• Error message: "Preparation set up windows, do not turn off your computer" when to stop the system.

  Original title: closure of the problem

  Almost everytime I turn off my laptop, I get the message ' Preparation set up windows, do not turn off your computer . Then it takes forever to finally stop. Suggestions for this problem?.

  Hi ArthurCosford,

  This screen appears when you have pending Windows updates must be installed on the system or when you installed the Windows updates on the system.

  Step 1:

  You can check the windows updates history to discover updates recently and failed to install.

  For more information, you can consult the following article:

  See the Windows updates are installed

  Step 2:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• "Preparation set up Windows. Do not turn off your computer"can't NOT GET PAST!

  I have windows 7, and once everything was loaded, she wanted to make a few updates
  I stopped him so he can make and it's updated 33/42 for 2 hours before I gave up and restarted

  now it is stuck on "preparing to set up Windows. Do not turn off your computer.

  Help!

  Hi Gronfors,

  Try to start the computer in safe mode do a system restore and check if it works very well.

  To start in safe mode follow the link given below.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are able to boot to the desktop in mode safe mode try Method 1 if one does not work follow method 2.

  Method 1:

  Navigate to the specified location and delete the files, and then try to boot into normal mode

  c:\windows\winsxs\reboot. XML

  c:\windows\winsxs\pending. XML

  Once you boot to normal mode try to install the updates one by one and check if Windows update terminates the process.

  Method 2:

  If the above given step does not work try it to perform a restore of the system in safe mode and check if that helps. Follow the steps below.

  You can perform a restore of the system on the computer to restore the previous settings again.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information follow the link below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Once the system restore try to boot to the desktop in normal mode and check if updates work fine. Try to install the updates one at a time.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.