Windows is not answer/work properly!

Similar Questions

• Windows Defender has stopped working properly

  When I turn on my laptop it user interface say that windows defender has stopped working properly, can not open windows defender to look at settings etc and since it has stopped working the computer guard stopping self to protect self, someone at - it ideas? It also came with "" error 0 x 80000003: one or more arguments are invalid '? "

  Hi richard.weeman,

  Try to restore your computer to a previous state of safe mode.

  Follow the instructions to start the computer in safe mode.

  1 turn on the computer or restart the computer
  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.
  If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.
  3. ensure that the safe mode option is selected.
  4. press ENTER. The computer then begins to start in safe mode.

  Follow the instructions below to restore your computer to a previous state of safe mode.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. in the System Restore dialog box, click Next.
  3. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  4. click on finish.
  5. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  If this does not work, follow the instructions in the link below to perform clean boot in safe mode.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Windows Vista has stopped working properly

  
  

  I get a problem report that says that Windows Vista has stopped working properly. It is said to know if I have 32 or 64 bit system. For this I am told to click the Start button, click computer. When I click on start I get a computer. What should I do now?

  "pastafasul" wrote in message News: * e-mail address is removed from the privacy * .com...

  
  

  I get a problem report that says that Windows Vista has stopped working properly. It is said to know if I have 32 or 64 bit system. For this I am told to click the Start button, click computer. When I click on start I get a computer. What should I do now?

  If you see the icon on the desktop, do a right click on that and then left click on properties. The window that opens has all the information you need.
   
  If no icon, and then start Windows Explorer and right click on computer it followed by the left-click on it.

• The search in Windows Explorer has stopped working properly - it does not find the files which are there, but will find other files that match the search criteria

  Window 7

  Was working before, but have only allowed a number of updates to Windows that had been blocked for a while.

  For example. Type 'safe' in the search box. It finds files and directories with 'security' in the title, but not the files and directories that I can see are there with 'safe' in the title.

  When I search using the "safe * ' it seems to do exactly the same thing as"safe ".  It does not show only files beginning with 'safe'

  My suggestion was not ' safe * ' but ' name of the file: ~ safe * "(without the quotes).

• Why Windows 7 not Explorer works best with folders and files

  I just think someone ' one at Microsoft would notice how explore gets all sorts of things, including records. Or Microsoft chooses to produce Amend bad software quality lack of professionalism that we must do all what how Microsoft has decided the way they wanted to do. Kind o0f as when I want to recover my files organized in various ways as all my PDFs in one place. Just because some guy in a video how bad it is inn files scattered to the four winds on xp - xp they makes it easier for us to have the list of software from various places... but I still want to organize my files the wayn I want is their non-Microsoft work just disagree and so what they give you - consider "Thank you Mr President, may I have another". nevber is how I did things.

  Hello

  Sorry your Question sounded really like comments on Windows and not so
  a large part of a request for assistance for questions.

  If you need help for Windows or other Microsoft products that meets
  support then ask in the appropriate Forum.

  Answers - Forums
  http://answers.Microsoft.com/en-us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows was not shut down properly due to the system not responding do not. How do I fix this problem?

  When I start the laptop it says that windows is not properly and start in normal mode, safe mode, etc. when doing whatever it is above, it takes a while and then the screen make dark with the single mouse arrow and the laptop still does not start at the top. What to do to fix this problem?

  Hi lana02,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try the steps listed in the articles below and check if it helps you to fix the problem.
   
  Computer stops responding with a black screen when you start Windows XP
   
  Advanced Troubleshooting for General startup problems in Windows XP

• In a problem report it says that Windows Defender has stopped working properly - I'm not an advanced user KB article is like a foreign language to me - HELP!

  Product
  Command line utility Windows Defender

  Problem
  MpTelemetry

  Date
  08-06-2009 22:22

  Status
  More information

  Signature of the problem
  Problem event name: MpTelemetry
  Signature of the 01:80240022 problem
  Signature of the problem 02: ProcessDownloadResults
  Signature of the problem 03: download
  Signature of the problem 04: 1.1.1600.0
  Signature of the problem 05: MpSigDwn.dll
  Signature of the 06 problem: 1.1.1600.0
  Signature of the problem 07: Windows Defender
  The system version: 6.0.6002.2.2.0.768.3

  Additional information about the problem
  Bucket ID: 29795427

  Hi 1pinktink,

  Welcome to Microsoft answers forums!

  a. What is the exact error message that you receive?

  b. don't you make changes to the computer before this problem?

  c. what anti-virus program you installed on the computer?

  This problem may occur if there is a conflict between windows defender and the security software installed on the computer.

  I suggest you try the following steps:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Activate security software back once the test is completed.

  Step 2: The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a SFC scan on the windows vista computer. To run a scan suite SFC as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type sfc/scannow , and then press ENTER.

  Step 3: Install the latest updates for windows defender

  To check updates in Windows Defender, follow these steps:

  1. start Windows Defender if it is not already open. To do this, click Start, click programs, and then click Windows Defender.

  2 search for new definitions. To do this, click search for updates now

  Please check the links below, which deals with a similar question
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/e72f2d6a-31cf-4FD9-B735-b4382eac6b89

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows are not lining up properly on the screen

  My mother just got an Acer with Windows XP netbook. When I open IE, the window has been cut into the upper part (couldn't see the close button or address bar) and covered the lower part of the screen (so the Start button was not accessible). Is there a solution for this? I could not understand how to fix it.

  Hi MeredithRegal,

  -Other applications work without any problem?

  It might be possible that the button mode full screen was pressed by you accidentally.

  Press F11 on your keyboard to exit full screen and check if that helps.

• Cannot get Windows 7 homegroups to work properly. Double-click a shared library on another machine in the residential group doesn't.

  I just bought a new laptop with Windows 7 on it, so I decided to try the new homegroup in Windows 7 feature.  I activated the homegroup on my desk and apart from the music, photos and videos.  I then joined the residential group with the new portable computer using the password provided by the office shared libraries and the same 3 homegroup.  All appeard to put up correctly, but I can't browse libraries shared each machine to other machine.  I have the Homegroup and click on the other machine and I see 3 libraries, but when I click on any one of them does nothing.  This happens on both machines.   The only way I can get the residential groups to work is to first go to the other machine and provide credentials on the other machine.  After doing this, the homegroup files begin to work.  I was under the impression that the homegroup password was all I had to have access to all shared folders with the homegroup, but the only way I can get the homegroup to work is first authenticate itself to other machine using a user name and password.

  The two machines are configured with the following:

  • Network discovery is enabled
  • File sharing and printer is enabled
  • Public folder sharing is on
  • Streaming Media is on
  • File sharing connections is configured to use 128-bit encryption
  • Password protected sharing is on
  • Homegroup connections is set up to allow Windows to manage.

  I came across this forum because I had the same problem today. Real quickly, I have two laptops, one running windows 7 Home premium 32-bit and the other runs windows 7 Professional 32-bit. I have comcast for my internet provider and their cable modem attached to my belkin wireless router. I don't know if my fix will work for someone else, but it worked for me, so this is.

  1. unplug the router cable modem wireless
  2. connect the router to one of your computers using an ethernet cord
  3. open a web browser and type in the IP address of the router in the Web page bar (as when you type hotmail.com to go check your email). Mine is a belkin so 192.168.2.1 has worked for me.
  4. the control of the router page should open, and one of the options should be to reset factory settings, do this.
  5. DO NOT CONNECT THE ROUTER TO THE CABLE MODEM
  6 configure the router in the same way that you did when you first installed the router, but just to be sure, I used another name for the network
  7. Once you have the password set up and named network you can disconnect the ethernet cable.
  8. connect to the new network without wire of each computer (just like when you connect to a wireless network) choose House (rather than work or public) for the network location.
  9. at this stage my homegroup didn't work, if it is not there for you, you may need to set up the homegroup in Control Panel.
  10. once the residential group is working the way you want to connect the router wireless to the modem cable and check to see if your internet connection is working by opening a web browser and go to any old site
  Hope this helps!
  Cameron

• Interface Web links do not always work properly (check the updates, install app)

  OS 6.4.1, RN10200.

  I have 2 servers ReadyNAS (2 x RN10200). On one, when I click on for example, "check for updates", a pop-up window opens and he tells me that my OS is up to date. When I click on the link even on the other, the arrow device turns into a turning circle for a while and then comes back to arrow down, and that's all - it is not whether or not the operating system is up-to-date, or offer to upgrade. In order to upgrade the OS, I have to manually do it.

  Another example: I can not install the application on the NAS that is not fully functional. I click on 'Applications', get the list, click on install (from any application) and receive an app error message failed (2nd pop-up, one says that she prepares packages). Then, my browser window restarts the connection to the admin page and I'm on the System tab.

  The other NAS doesn't have this problem. The problems started when a system hung during the upgrade of the OS to 6.4.1. I had to do a factory reset (in fact, I tried to do a reload of the OS from flash which then ended in a complete reinstallation I can tell) and then manually install the operating system.

  Any help would be appreciated.

  Thank you

  Piet Stevens

  You are absolutely right. Thank you very much as I had no idea what it was. But your support made immediately in the right place. Very much appreciated.

• HP Pavilion dv6-3259wm: CD / Blu - ray player does not open / working properly

  My CD / Blu - ray player does not open. I can force it with a paper clip and put in a disk in this way, but it does not turn on and play the disc. The drive does not appear as a file selection as part of my hard disks in my computer section.

  With that I guess my optical drive is broken, so I tried looking for a replacement. I looked up the name of the optical drive in the HP PartSurfer and he says it's called SPS - DRV DVD SATA BD Combo 12.7. Just to make sure, is this the right part I'm looking for? If so and say that I should go ahead and order this part, how do I go about removal of the optical drive in my labtop and its replacement by the new drive?

  Hello

  Yes... It is the right part for your laptop.

  HP Pavilion dv6-3259wm Entertainment Notebook PC - (XZ087UA): 603678-001

  You can follow the instructions from the links below:

  Removing and replacing the CD/DVD drive

  Or,

  HP Pavilion dv6 Entertainment PC - Maintenance and Service of Guide

• Windows will not be automatically extended to 10% battery power!

  In power options, I put my system into hibernation automatically if the laptop reached 10% of its energy from the battery. I use Windows 7 Home Premium. From Dell. The battery lasts 3 hours most of the time. Reference Dell thinks that this problem is a problem of operating system. They think that "the signals of the battery are not achieve the thing that controls when the computer is supposed to take action and the hibernation. They won't help because they say that my warranty covers only material. Microsoft is willing to help - for $80!

  At the moment my computer is not simply Hibernate at low battery. He just shuts down suddenly because of the insufficient power (obviously).

  I don't know that I put the percentages and actions properly in power options.
  I don't know if the Windows 7 hibernation feature works properly on my laptop.

  Help, please! Thank you for your time :):):)

  Hello

  Have you asked Dell about possible BIOS, low-level chipset or other drivers they would have
  which may affect this issue? Also ask in the Dell forums where there are probably others who have had
  the same question.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ===============================================================

  References to Vista also apply to Windows 7.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
  Modem and so on.

  How to enable or disable Hibernate in Windows 7
  http://www.SevenForums.com/tutorials/819-Hibernate-enable-disable.html

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  How to create a Hibernate shortcut in Windows
  http://www.SevenForums.com/tutorials/23836-Hibernate-shortcut-create.html

  How to manage Hibernate Mode in Windows 7
  http://www.howtogeek.com/HOWTO/7564/how-to-manage-Hibernate-mode-in-Windows-7/

  These might help:

  Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
  http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

  How to solve a problem of Standby Mode Vista and find a Solution - also applies to Windows 7
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Sometimes reset power Plans to default values help and then put them as needed.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to manage Hibernate Mode in Windows 7
  http://www.howtogeek.com/HOWTO/7564/how-to-manage-Hibernate-mode-in-Windows-7/

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  How to restore the default settings of the power Plan in Windows 7
  http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error when you try to activate Microsoft Outlook 2003: 0 x 80042108 and error of Windows Explorer: Windows Explorer not responding

  0 x 80042108

  I am trying to activate Outlook 2003 with Vista and I got the following error message: 0 x 80042108.  He managed to find Gmail, but couldn't connect.  Vista is not compatible with gmail?  I have a problem with the Windows Vista Explorer I get a "Windows Explorer (not answer) message - very frustrating."  Any suggestion or help out there?  Thank you!

  This is a reply by Narasha Dsouza, MS Support, moderator
  Date: December 9, 2010.

  http://social.answers.Microsoft.com/forums/en-us/outlookacct/thread/2a80ee74-6552-4618-8325-586b8f563ff7 For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I can't install Service Pak 2 for Windows Vista. I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere. Help!?

  Install Windows Vista Service Pak 2 upgrade

  I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere.

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows xp reportsThis device is not present, does not work properly or does not have all its drivers installed. (Code 24)

  in the device under the non-plug-and-play drivers Manager... it has a yellow question mark next to this "MpKslb71170d2" I have no idea what it is.

  the error code is 24 and is shown below

  Windows xp reports "this device is not present, is not working properly or is not all its drivers installed." (Code 24) »

  the choice, it gives me is to disable or uninstall... What is this error, what device, what should I do?

  Same computer as in this other thread of yours? -Online http://answers.microsoft.com/en-us/protect/forum/protect_updating/the-red-shield-is-on-my-microsoft-security/9243c546-aa6d-46cc-8780-2ac040a52e35