Windows is uninstalling the device. Code 21. Device_IPod

Original title:

Device_IPod

Using Windows 7.  I am able to install my ipod, but it disappears as soon as I click on it.  In my devices & printer folder, is to show a problem with the ipod.  Universal Serial Bus controllers.  When I click it, the message is that windows is uninstalling the device.  Code 21.  Why this is happening and what settings should I change.  Device is connected to Port_ #0003.Hub_ #0008.

Hello

Code 21

Windows removes this device. (Code 21)

Recommended resolution

This error means that Windows is trying to remove the device. However, the device has not yet been completely deleted. Here are some things you can try to solve this problem.

  • Wait a few seconds and press the F5 key to refresh the display of the Device Manager .
  • If this does not resolve the problem, restart your computer. Click Start, click shut down, and then select restart in the Shut down Windows dialog box to restart the computer.

You can try to uninstall the iPod from the Device Manager, restart the computer, and connect the iPod. It should automatically detect and install the drivers for it. Check if it works.

If the steps above fail, please contact the Apple support team for help.

It will be useful.

Tags: Windows

Similar Questions

  • in Device Manager, I see yellow question mark in the infront of ISATAP adapter #5 network drivers... its donations windows cannot load the device code 31 driver... Wat shud I do? answer as soon as possible...

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messagesn Device Manager I can see yellow question mark in the network in front of the ISATAP #5 card drivers... failed to load its donations driver for device code 31 windows... Wat shud I do? answer as soon as possible...
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Control Panel - Manager of devices - right click on those - UNINSTALL - REBOOT

    Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
    and on some computers, it will always be there but don't cause any trouble.

    On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
    ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
    error message
    http://support.Microsoft.com/kb/932520

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Original title: the answer useful?

    Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Windows cannot initialize the device of this hardware driver. (Code 37)

    Windows cannot initialize the device of this hardware driver. (Code 37)
    There is no upper or lower filters in reg.
    external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
    How do I solve this problem

    Hello Rajendra Aagarwal,

    Thank you to contact the community Microsoft and we will be happy to help you with your concern.

    According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

    Method 1: Run the Fixit and check

    Hardware devices do not work or are not detected in Windows (Fixit)

    Method 2: Check the steps to get the 37 error code

    Explanation of error codes generated by Device Manager in Windows XP Professional 

    Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

    Good day!

    Hope this information helps.

  • I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

    I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

    Hello

    I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

    http://support.Microsoft.com/kb/310123

    It will be useful.

  • Windows has stopped the device because it has reported problems. Code 43 with generic bluetooth adapter.

    Windows has stopped the device because it has reported problems. Code 43. Something with the generic bluetooth adapter. What should do?

    Original title: Please help

    Hi JovanaNesic,

    One of the motors controlling the unit notified the operating system that the device has failed in some way.

    Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

    Follow the link below a convenience store opened.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    If you have already run the Troubleshooting Wizard, you can view the documentation for the hardware for more information about diagnosing the problem.

  • Windows 8 times the device disconnect sound...

    Windows 8 times the device disconnect sound, my screen goes black, then both the windows the device plug his and my monitor turns on again. All my windows open and then re sizes to the top left of the screen. This happens randomly as I work with the computer. I have a Dell Vostro 270 connected via a VGA cable to a Samsung S22B300. I checked the event logs and Device Manager. Everything seems good. Please help if you know what this may be.

    Typically, this means two things: either the cable is loose, or the video driver broke down.  Usually if it's the driver, you would see that in the event where newspapers and maybe even a notification bubble near the clock when you see your desktop yet (something like "your display driver recovered").

    Do you see something like that?

    In addition, when the problem started to occur?

  • my dvd drive has stopped working. says windows cannot load the device driver, can be corrupted or missing code 39. When I search for updates, it says I have the most up to date. Help!

    drive is Matshita DVD-RAM UJ-850 s a SATA drive

    I use windows Vista

    Driver provider Microsoft

    Day 21/06/2006

    Version 6.0.6002.18005

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Win7 64 bit, all the devices code 52 after unsigned driver install

    I am running Windows 7 Pro 64-bit in test mode, I accidentally forgot to 'fake sign' a libusb-win32 with "driver signature enforcement overrider" driver forehand and tried to installed, the computer froze during installation and then after a hard reset, most of the devices in the Device Manager show a code 52 (windows cannot verify the digital signature for the drivers required for this device). This error applies to the devices even with drivers faith. No USB devices work since the host controller will not work. I can't use my mouse or access the internet from this computer (wireless and ethernet also does not work).

    I uninstalled entries hidden for the device I've initially tried to install and rebooted and still the problem has not disappeared.

    I have no System Restore enabled.

    Disabling test mode is not enough, even after rebooting.

    delete the DLL and SYS to C:/Windows libusb0 did not help

    Reinstall the Dell WLAN drivers does not resolve wireless

    beginning with "Disable Driver Signature Enforcement" does not help

    Unable to perform the backup due to not having any capacity USB or network

    Frank_26080115,

    See the link below to put on with similar problem and try the steps mentioned by"Gokul T" and check if it helps!

    http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/2379017c-D513-478C-A184-0d1b7cd408b2

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Equium - Windows cannot load the device driver for USB dongle

    I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    -what it means and how can I solve this problem?

    Hi Ozcat,

    What USB dongle is that exactly?
    What cell phone do you have?
    What operating system is installed?
    Have you already tried to reinstall the driver for USB dongle?

  • Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

    The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

    We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

    The specifications of the laptop are:

    HP Pavilion dv7

    Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

    4 GB OF RAM

    64-bit Windows Vista

    Hello

    Check with HP Support, their online documentation and drivers, and their known forums
    questions.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Windows is uninstalling this device C21

    My iPod will not be synchronized with the computer. In the Device Manager and got this message in the Device Manager screen.    "USB mass storage device. This device is Windows uninstaller. C21. »

    How can I fix this?

    Hi sunbeds.

    This error means that Windows is trying to remove the device. However, the device has not yet been completely deleted. Here are some things you can try to solve this problem.

    Wait a few seconds, and then refresh the display of the Device Manager. If the device appears, restart the computer.

    How to fix errors in the Windows device for the Zune device manager

    http://support.Microsoft.com/kb/953933

    (Article remains valid for the issue at hand)

    Reference:

    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When you install Windows 7, receive the error Code 0 x 80070490

    At the beginning of the installation of Windows 7, I get this error message.

    * original title - Error Code 0 x 80070490 Windows Setup can't find a place to store temporary installation files. Intall Windows, make sure that a partition on your startup disk has at least 686 megabytes of free space

    Try these suggestions:

    Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:

    Reset permissions
    ============

    1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

    2. go to your desktop and double-click on the downloaded file.
    3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

    4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
    5. copy the following commands, and then paste them into the opened Notepad window:

    off @echo

    Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
    Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
    Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
    Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

    Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
    Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
    Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
    Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

    @Echo =========================
    Completed @Echo.
    @Echo =========================
    @pause

    6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

    7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
    8. you will see a window of type BACK treatment.

    NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

    If the same thing happens, move to the next step.

    Run the upgrade by using the built-in Administrator

    ================================

    1. click the button start-> all programs-> Accessories.

    2. right click on command prompt and select "run as Administrator".

    3. click on continue when user account control window appears.

    4 copy the following command and press ENTER:

    NET user administrator / Active: Yes

    5 restart the computer and then log on the computer of this administrator account.

    6. run the upgrade to windows 7.

    Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade.  You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.

    BTW, for your references, I found similar questions:

    Windows could not create a required installation folder. Error code: 0x80070005
    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/d04e9cf3-3eae-4A1F-a9f8-e2c5ed88d183/

    "Cannot create file" error when you try to install Windows 7
    http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/3621e8cf-B2CE-479b-BEAC-08acc435a856

    Error 0 x 80070005 when upgrading to windows 7 from vista
    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/08986904-c822-4801-95a5-55ddd5aadcea/

    See also:

    http://social.answers.Microsoft.com/forums/en-us/w7install/thread/cb679e27-f2e6-4CD5-b708-a4992cec5a9d

    CREDIT: Dale Qiao Microsoft, host and cdobbs releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • CD Rom drive - DVD Ram - windows cannot load the device driver

    Model: HP Pavilion Touchsmart Notebook PC 15 n209TU 15

    Operating system: Windows 8

    The CD drive does not show

    Error code 39

    Hello

    Please use the following meethods to fix:

    http://support.Microsoft.com/kb/314060/en-us

    Kind regards.

  • Trying to get Windows updates, get the error code 80004005

    I can't upgrade my pc to windows updates... it seems to download but when the pc reboots it comes up saying failure and makes me again with the same result... It continues to flow upward with the error code 80004005, but cannot find a result or information on this code or what to do to solve this problem... any suggestions?

    * original title - I get the error 80004005 When trying to get updates... my computer updates not for some unknown reason and I can't find what this code means and what to do to fix it... Please help *.

    How to ask a question
    http://support.Microsoft.com/kb/555375 >

    It helps those answering questions if you provide:

    what the version of windows (32-bit or 64-bit) and service pack level.

    you use what browser (exact version).

    what application anti-virus or security suite is installed and your current subscription?

    What third-party firewall

    What anti-malware software can be installed.

    What updates you trying to install? (Number of KB)

    What error do you get everything when trying to install updates?

    Please do it in your next reply.

    You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based http://support.microsoft.com/kb/914232computer >

    Error code 0x80004005

    This problem may occur if a file that requires product Activation Windows (WPA) is damaged or missing. This problem occurs if one or both of the following conditions are met:

    A third-party backup utility or an antivirus program interferes with the installation of Windows XP.

    A file that requires a WPA is changed manually.

    Try manually download and install the update problem - http://catalog.update.microsoft.com/v7/site/Search.aspx?q=KB935509>

Maybe you are looking for

  • How to uninstall the EverQuest game on windows xp?

    How to uninstall the EverQuest game on windows xp? all game files there are a lot of hidden files & I can't find any program uninstaller. I do not think thatI should just delete the files I've met without uninstalling. I need to get rid of all EverQu

  • Receive the error message"insert disc" when playing DVD

    Original title: windows media DVD player When I try to play a dvd I have message to insert a disc

  • How to show registered users in ACS 5.1

    After some time using Cisco ACS5.1 no, I still don't know how I can see all registered users. I can see logging and check why a newspaper by not going, but ACS 3.2 I just clicked on the reports and activity and I could choose to see registered users

  • Several change of Email

    We have a list of e-mail addresses that have been changed. We send internal e-mail to trading partners using an email @einstruction.com. E-mail addresses have been updated to be @einstructionpartner.com.It is a way I can batch change these emails wit

  • Why cant I get my Icloud - 'things '.

    I got creative cloud two years now. All of a sudden when I click the icon in the Apple menu on the right that I just get a white box... my passwords and other settings are correct when I go 'outside' to Adobe