Windows Live Mesh for Mac does not work with Mac OS 10.7 Lion

Maybe someone could help me with this.

  • I migrated to a disk hard again and update of Snow Leopard Lion this week
  • Live Mesh has stopped working so I downloaded the most recent distribution of MS: 15.4.5726.23, 20/07/2011 release date, which says it's for Mac, including the last OS 10.7 Lion as well.
  • It loads, wait, does nothing (the choice of unique to Quit or help menu, and then it ends after about 30 seconds, the LiveAgent not appearing.)
  • I made sure the application has access through the firewall Mac and use the stealth mode.  With stealth enabled, there are messages from the console: Live Agent is listening to 0.0.0.0:59142 proto = 6 AND Live Agent is listening to: ffff:0.0.0.0:59142 proto = 6 AND the first msg repeats.    I also disabled the firewall to test without effect if LiveAgent fails to load. Firewall of variants: with the firewall on, LiveAgent just sits with console messages above until the user clicks on the icon status agent and it then goes to the waiting interminable spinner; with the firewall off, it goes to spinner in less than 15 seconds spontaneously with the GSM, but two sets of their pop up.
  • I repeated a deinstall [app and files] / refresh-download/install process three times and got the same results.
  • In the Finder, and LaunchPad, the icon is displayed normally.
  • I reinstalled the previous version [15.4.5722.2] and the LiveAgent charges, but never decided and just hangs.
  • After doing this and made a fourth installation 15.4.5726.23, 20/07/2011, it now loads the agent but is still suspended as the previous version.
  • If after that, I have now the LiveAgent treat during initialization, but never finished.  It remains active for approximately 8 MB of RAM, but no cycles CPU are used
  • My sync folders are orphans of their source computer, although they always synchronize with my Win7 laptop.
  • I dug a little deeper trying to solve this problem.  I get the following error message if I dig in the 15.4.5726.23 app and run the executable manually:

aarc01: ~ $ Applications/richard/Windows\ Live\ Mesh.app/Contents/MacOS/Windows\ Live\ mesh; "exit";

Exception thrown:

System.IO.FileLoadException: Error 0x1A88.  Debugging resource strings are not available. See http://go.microsoft.com/fwlink/?linkid=106663&Version=3.0.50908.0&File=mscorrc.dll&Key=0x1A88

[IO. FileName_Name]

Arguments: Microsoft.LiveFX.ResourceModel, Version = 15.4.0.0, Culture = neutral, PublicKeyToken = 7cec85d7bea7798e

Debugging resource strings are not available. Often the key and arguments provide enough information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=3.0.50908.0&File=mscorlib.dll&Key=IO.FileName_Name

at Microsoft.MeshOperatingEnvironment.Runtime.Client.MoeRuntime.Start)

at Microsoft.MeshOperatingEnvironment.Runtime.Client.ILFilter.ExceptionFilter.TryFilterCatchFinally (FilterDelegate filterDelegate, CatchDelegate catchDelegate, TryDelegate tryDelegate, FinallyDelegate finallyDelegate)

I've seen this behaviour before with v.15.4.5722.2, about 4-5 months ago, but I do not remember what was the solution that solved.

Can anyone out there advise me?

THX in advance,

RC

Hello RichardCampbellVancouver,

There is a dedicated forum dealing with problems Windows LIve Mesh. They will be better able to answer your question in the forum.

Please transfer your question in the Windows Live Mesh Forums on the link below.
Click on the yellow - ask a Question.

http://windowslivehelp.com/product.aspx?ProductID=24&version=15.3.2804.0607

Sincerely,

Marilyn

Tags: Windows

Similar Questions

  • Try to download and install Windows Live Messenger, but it does not work.

    Original title: im trying to download windows live messenger but his does not work although the Messenger, I was downloading is compatible to my pc

    How can I install windows live

    Hi asian1955,

    Have you tried to download Windows Live from here: http://explore.live.com/windows-live-essentials?os=other this is the latest version of Windows Live. Once you start to install, simply install the components you want, there is no need to install anything if you do not need.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Cannot install WIndows XP SP3 - wireless adapter does not work with any package of service beyond 2.0

    original title: wireless adapter does not work with any package of service beyond 2.0

    I have an AirLiink 101 wireless adapter.  Anyone know how to change the service pack 3.0 for me to update my Windows XP?   Can not install 3.1 without losing wireless connection.

    Thanks for any help.

    If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

    UTC/GMT is 06:49 on Wednesday, April 11, 2012

  • Profile TB of Windows 7 on old pc does not work with Win 10 TB on new pc

    I have a new pc running Windows 10. I'm migrating my TB profile form the old pc that works under Windows 7. When I copy just the profile copy the old TB pc to the new PC, TB does not seem to recognize it. I even tried to keep the TB to create a new profile on the new pc, then replace with the old pc profile, in the profile name the same as the name of the new profile. That is, just replace the content of the profile created with the old profile.

    The problem is that none of the old profile information seems to be used. In particular, none of the folder structure for the 4 accounts that I appear.

    I think there was a restructuring of the profile in version 10 of Windows compared to the version of Windows 7. Is it possible to migrate my data without having to manually recreate?

    Thank you
    Tim

    Just a note for the future. Make it obvious what are your personal skills. Most of the silent usage down the answers and adds a lot of things that someone who knows what they are doing does not need.

  • LaserJet 5 M does not work with os x 10.7 (Lion)

    I upgraded two Macs (imac + macbook) to Lion Snow Leopard a few months ago. Since my Laserjet 5 M prints is more from these macs.

    I downloaded all the updates from Apple including update HP printer, but all I get is a message "the printer does not respond" when I try to print.

    The printer works fine when I use my older iMac with OSX 10.4.11 (Tiger).

    The Laserjet Printer in question is connected by Ethernet network printer.

    What's wrong?

    Apple just put up-to-date 10.7.3 Lion and I tried to print again.

    It works!

    It seems that the problem was related to Apple and not HP.

    Thank you for your help. This issue is now closed.

    Zimbozimbo

  • AirPlay - aTV video, sound effects for AExpress: does not work with large files

    Hello!

    My setup

    • Internett--> modem (Cisco?) --> a/c Airport Extreme (latest high version)
    • iMac, iPad, 2 x iPhones. iMac installed Beamer.
    • Bedroom: AppleTV 3rd GEN rev A - hdmi--> LG TV (old). AirPlay ON, 'Apple TV room '. Connected to the local network of 5 GHz.
    • Bedroom: AirportExpress 1st GEN 802.11 a/b/g N-Draft (last type of those that go right into the socket) with AirPlay - stereo--> stereo BOSE. AirPlay ON, 'room '. Connected to the local network of 5 GHz I also tried to connect 2.4 GHz network, no significant variation...
    • Living room: AppleTV 4th Gen. - hdmi--> LG TV (new). AirPlay ON, "iTV."

    Problem (abridged version)

    Most of the time - but not every time - when I stream video + audio iMac to aTV and choose to listen to the audio portion of the aTV to a separate AExpress (which is connected to a better BOSE audio system), the movie will not play. Streaming both audio and video - and only - the aTV works perfectly, but then I have bad sound, since I use the TV's internal speakers. What is reasons for it? Tips to fix it?

    Problem (full version)

    Every time when I stream video and audio from large multimedia files (about 3-4 GB .mkv) of the iMac (Beamer) on the ATV to the room, I didn't encounter any problem. Buffering is fast (2-4) and there is no delay or other negative experience. Unfortunately, as with all flat TVs, the sound of the TV is poor. Since I have a BOSE sound system, placed around this TV, I like to use it for audio. As I do this is - after the streaming media file (Beamer) iMac to the bedroom aTV - pressing the Center "Select" button during 1 sec on the remote to display the "audio" preferences and select money "Chamber" (AExpress related to the BOSE sound system). In this way, I think that audio + video is streamed to the iMac on the ATV in the bedroom, and the sound is then broadcast the ATV to the AExpress. This is where the problem occurs. Sometimes it works very well, as today in the morning. No lag and everything works fine. But most of the time, after changing the preference "audio" in the sound stream for the BOSE, the beginning of the play symbol buffering becomes the symbol of the break and nothing happens. I hit play again and the symbol of the game / buffering symbol lights up for a few seconds, and then again to pause. She never starts.

    The problem usually occurs with heavy multimedia files / large size 1080 p and 3-4 GB, not with the simplest 720 p files weighing about 1 to 2 GB. This makes me think it's a matter of WiFi capability. But if my WiFi network should not be able to manage that? I think that the apple TV in the bedroom and the AExpress uses the N standard, so it is the limiting factor. But if this interface should not be able to handle the traffic? Is it true that do what I do - separate the video and audio - use twice the network traffic?

    I also want to mention that everything works perfectly at certain times, like this morning. Last night (12 h) it wouldn't work at all... Perhaps there are more traffic yesterday (Saturday) evening.

    Questions (summarizes all Qs in text and some new)

    1. My network be able to handle the traffic encountered at the stream video + audio iMac to mountain BIKING in the room and streaming audio of ATV to AExpress at the same time?
    2. It is true that this configuration requires / use twice the network resources?
    3. Do you also think that my problem is caused by a network limited issue / the amount of data PR. second?
    4. I have a new (flat unit with power cord separate) Airport Express. This device manage more traffic and thus possibly resolve my problem?
    5. Other suggestions to solve my problem?

    Sorry for long post, but I think that its better with much info little. Have a great Sunday =)

    I think I can explain the reason for the problem... but I have little experience with sound problems... so you will need to figure out a work around.

    The nature of wireless networks, it's to manage the stream very well... but they are much less good at the sensitive time of things like multimedia transmission continuously. In fact, if you want to stream multimedia content over wireless, it is preferable to use specialized units... no wifi. I have a 3D projector and home theater system that uses a special wireless link from Epson to the projector... It is amazing that it can handle the required data of 3D projection. It does so by using 60GHz or some these extremely high FREQ... and totally dedicated units... no wifi. In the end, we ran an HDMI cable in the wall... it was largest wireless but not could be started reliably. Wireless is simply not ready for the big time of streaming video high definition even when dedicated.

    Wireless network adapter... It is wifi, can handle only one connection at a time and it time slices between clients. It's also half-duplex, so it can only send or receive... it can't do both at the same time.

    On the other hand, modern interrrupteurs ethernet can stream to multiple devices at the same time. It can also handle send them and receive at the same time... That is to say in full duplex. This is why the networks ethernet much more suitable for media streaming wireless never can be.

    As soon as you try to use double flow... even if it is audio (low bandwidth) and a video (broadband), you will cause huge delays to the video component. The video stream has literally if stop to give the time to the audio to catch up... you can immediately see where this will lead. Low resolution, it might work... but at high resolution, there is bandwidth inadequate considering the Division of time.

    It would be much better to use the audio on the TV. Or check if the TV itself has audio output... that plug into the standard analog audio system RCA or it could even have out optical. Who will then provide a means by which the flow must not be split. My samsung smart TV offers you both.

    The other solution probably won't be viable... execution of ethernet.

  • We get the windows forum a sound response does not work with xp on bootcamp

    I use bootcamp on Apple Lion operating system b

    and I can't get the sound to work on windows (I am running windows XP Pro)
    Hello
     
    1. What is the number of brand and model of the sound card on the computer?
    2. If it works well before?
    3. don't you make changes to the computer until the problem occurred?
     
    I suggest that you install the updated drivers for the soundcard on the computer by visiting the manufacturer of the sound card and check if it works.
     
    How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658
     
    For your reference: Check from the link below.
     
     
    Hope this information is useful.
  • New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

    New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

    That is right. The requires iTunes 12.3.3 and in order to get it, you will need to update OS X to El Capitan. That's how Apple has created for better or worse, I'm sorry.

  • Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

    Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

    Double post please see also /questions/925441 #answer - 326583

  • Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

    The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

    When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

    Additional resources:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

    I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

    However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
    "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    What should I do?

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • The foot pedal RS27 and Olympus AS-5000 - work of transcription for Windows 8 or 10 (pedal does not work on Windows 7 and do not want to shell out $300 to Olympus again)

    The foot pedal RS27 and Olympus AS-5000 - work of transcription for Windows 8 or 10 (pedal does not work on Windows 7 and do not want to shell out $300 to Olympus again)

    Any help Nauru will be stuck with Windows Vista, I had to get three versions of Olympus and their pedals over the years and all they do is change the wiring or jacks, stupid as * I just like five different types.

    Desperately need to know if these pedals will work or does he know about the Sony or another software of transcription for the typist, not the dictator.

    Help.

    Hi Marvin,.

    Thank you for the quick update.

    Yes, I understand your question. However, if the programs worked with an earlier version of Windows, they can work with Windows or Windows 10 8.1 if you install programs in compatibility mode. If you access the executable file (.exe) for the game, I suggest you follow the steps provided below:

    Step 1: Download and save programs on the desktop.

    Step 2: Install the programs in compatibility mode.

    • Right click on the .exe file and click Properties.
    • Go to the compatibility tab.
    • Check the box for run this program in compatibility mode for:
    • In the list of operating systems, select Windows Vista (or any other compatible OS) .
    • Click OK.
    • Double-click the executable file to install the program and follow the instructions on the screen.
    • Restart your computer.

    Additional information:

    Make the programs more compatible with this version of Windows

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • 4clipika for satluj police (Punjabi) does not work with windows 8

    R/Sir

    4clipika software for satluj police (Punjabi) does not work with windows 8, but it works with 7 and windows xp. Please solve this problem.

    BSwakaf

    I suggest you cont developer patches or updates.  It is for the developer to make it work with win 8-not the other way around.

  • My webcam does not work with live chat

    Original title: webcam problem

    my webcam does not work with live chat and it happened last time specially when the computer do the update of rutin and I used to restore my computer to bring it back to the work of the web camera

    Thank you

    Hello

    ·         What is the brand and model of the webcam?

    ·         You're using a built-in or external webcam?

    Method 1:

    Try to run the Microsoft fixit from the link tool and check if it helps.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

    I suggest updating the drivers of webcam on the manufacturer's Web site, click on the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

Maybe you are looking for

  • the RAM brand

    I have a question for Y5070 16GB 4K. Does anyone know what brand of his ram?

  • kb2463332 no error 0x65b

    original title: kb2463332 failed Windows keeps kb2463332 update fails with an error of 65b o x

  • 8630 inkjet all-in-one: scanner

    Any help appreciated.  New 8630 L7700 old replacement.  Analysis of contracts of real estate that may be long.  L7700 seemed to compress files a bit and has never been more than 22 MB.  8630 just scanned pdf typical of the contract, and had 42.0 MB. 

  • SX80 - three entries PC

    Is it possible to have three entries on the SX80 PC without needing a controller of Crestron/emissions? If not, is there a video mixer, you can control the SX80 and the touch 10 Cisco? My goal is to have three video inputs without the need to add a C

  • Google calendar can not connect to the calendar app

    On a new computer (Surface Pro :) I have connected my Gmail account to my Mail app and it worked as it did on my old computer. When I closed my Mail app I was expecting to see my Google calendar event appear, but nothing was there. I open the calenda