Windows live quickcam pro 9000 when try to record vidio computer shut down restart

Similar Questions

• I have upgraded to windows xp pro and when I downloaded the sp2 computer freezes and restarts when I connect to internet

  I have upgraded to windows xp pro did all updates, and when he places classified sp2 it restarts fine then when I loged on more updates to update it freezes and reboots, when she will recover no codes or anything be it what could be the problem...

  Hello

  1 is it only during the use of the internet?

  Method 1.
  a. click on start and then right-click my computer.
  b. click Properties.
  c. click on the Advanced tab and then click settings under Startup and recovery.
  d. under system failure, click to clear automatically restart it the box.
  e. click OK, and then click OK.
  f. try to reproduce the error message.

  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Also I would ask you to update all the drivers of material from the manufacturer's Web site.

  I hope this helps.

• Logitech QuickCam Pro 9000 video does not work

  QuickCam Pro 9000

  M/N: V-UBM46

  PID or S/N: LZ921BP

  P/N: 860-000119

  Operating system: Windows Vista 32 bit

  Software of Logitech: QuickCam 11 software

  Version: v11.9 (From CD)

  I did a clean install, but the video doesn't always work. The MIC on the webcam works but the webcam itself will not work. I think it has something to do with a driver problem. Please tell me what steps to follow to correct the settings of windows and drivers, so that the webcam works. Thanks for your help.

  Hi ComputerFun,

  After searching the compatibility of Windows Vista site, it shows that the Logitech QuickCam Pro 9000 is compatible with Windows Vista 32 and 64 bit. He also had a download that was necessary for your QuickCam. I've included the URL for the Web site to verify if you have this download for your device.

  http://www.Logitech.com/index.cfm/435/3056&CL=us, en? DiSo = 13

  You can follow the link to install a webcam

  http://windowshelp.Microsoft.com/Windows/en-us/help/1070d774-F55D-4575-aba6-bc6b507af8561033.mspx

  Another test would be to do a clean boot and see if you have the same problem or if it could be a 3rd party software or program interfere.

  Follow the article below for more information to boot.

  KB 929135 - how to solve a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Have you tried to contact Logitech? I suggest you talk to them and see what they say.

  If please reply and let us know if the driver helped to solve your problem or if you still need help.

  I hope this helps.

  Kind regards.
  Nicolas Mathieu
  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/Microsoft answers feedback Forum > and let us know what you think.

• I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem. __

  I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem.

  Hello jabeena, welcome.

  This section would apply in fact to the Windows Live programs, but we'll see what we can do to help out you.

  I recommend to try this first:

  1. disable any antivirus software or security, you have running on your computer. Looking for software to disable that contains a firewall.

  2. click on START
  3. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  4 type the following and press enter

  Regsvr32 softpub.dll wintrust.dll initpki.dll

  5. then type the following command and press enter

  netsh winsock reset

  6. restart your computer and see what happens.

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to burn a movie, my computer shuts down. This didn't happen with more short films, but this one is about 84 minutes.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  When I try to burn a movie with videos imported from different sources, the computer shuts down after 10 minutes.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  limespider wrote:
  When I try to burn a movie, my computer shuts down. This
  didn't happen with more short films, but this one is all
  84 minutes.
  =======================================
  Sounds lke a question of system resources.

  Large, complex projects can cause problems... it can
  be worth a try to create several small projects and save
  each of them in the format .wmv movie to a folder on your hard drive
  drive. When you import clips .wmv collection in DVD
  Machine to each of them becomes a scene (chapter)... you can
  have up to 18 scenes.

  Besides rendering video is time CPU and could
  initially be an overheating problem that could also result in your
  computer to close.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My guard computer shut down unexpectedly when I play games.

  My guard computer shut down unexpectedly when I play games. Now it is not always the case, just sometimes. The other day I was playing Sims 3 all day, literally, with the graphics settings maxed out and had no problem. The next day, he would crash as soon as it finished loading, even with the graphics settings at the bottom. Today, it was working fine this morning and now it crashes again. I had the same problem on and off with other games as well, Halo 2, Kings Bounty, UT 3. Here is my system:

  OS - Vista Ultimate 32 bit
  Processor: Core 2 Quad Q9400 @ 2 .66GHz
  RAM - 4 x 1 GB PC6400 DDR2/800
  MB - MSI P7N SLI - FI
  HARD drive - 150 GB x 2 (Raid 0) Raptor 10 k RPM
  PSU - 1000 watts
  GPU - NVidia GeForce 9800GT 1 GB (x 2 in SLI)

  And the error I get from Event Viewer:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I got the error almost everyday since I got the computer, about 10 months ago, but it only blocks the computer if I play a game. I tried the 'fix' that removes the WMI event viewer 10 error, but everything done was make sure the error is not logged. I also tried another fix I found me delete the files in the repository, but that no longer works. I also run scans of complete system of virus/malware Spybot Search & Destroy and AVG 8 and verified the updated driver for my hardware. I also ran diagnostic tool memory. Who has good/clean/current. Can it be fixed or what I have to reinstall the OS?

  Hi JerHekSr,

  Thank you for using answers Forum.

  The first thing that comes to mind would be to check the motherboard manufacturer for an update of the firmware/BIOS.

  The error message mentions "loadpercentage > 99' which looks like you are running may at maximum load of the CPU while the game and that is the cause of the crash. You could try a clean boot to prevent the using CPU resources while you play to see if it makes a difference of strtup programs.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  I hope this helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I configure drive extender? get an error when the computer shuts down say reinstall Extender player

  get an error when the computer shuts down say reinstall Extender player. ? What is it. Thank you

  Hi deener49,

  Please look at the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_other/please-reinstall-Extender-Player-invalid-or/86692b09-9464-E011-8dfc-68b599b31bf5

• After running for 1-2 hrs closed windows, not to wait about 5 minutes to turn off turn back on. What can cause my computer shut down

  While on the internet (firefox) after using it for about an hour my computer shuts down automatically for no reason.  I have to wait about 5 minutes to turn back.  During the restoration of my session, I get this message "the script is not responding," if I hit continue Firefox closes running.

  There are several reasons that the PC automatically stops due to the error, usually you would see blue screen and system restart. It could be a hardware or software error. Windows check log and see what the cause was also check problem and solution center and see if something is there. Also update your Windows and run the disk check. Also execute following tool to make sure that your PC is free of malware:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• My new printer HP Officejet Pro 8600 causes my computer shuts down after 5 minutes.

  My new printer HP Officejet Pro 8600 causes my computer shuts down after 5 minutes.  Is there a way to find out why?  Is it because I connected to a USB port rather than wireless and telephone connection.

  Original title: computer spit

  I called the store where I bought the printer.  They suggested that I have download the latest driver

  from the HP website.  I did it and it seems to have solved the problem.

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Windows Live no longer works when I try to close it

  Whenever I have leave windows live mail, I get the following message - "Windows live mail has stopped working. Windows can try to restart the program. "Although it is not impacting on all mail entries, it is annoying and I can't stop from popping up next time I have quit the program.  This also happens for any other program 'live', that I run.  I'm frustrated.  I tried the process of repair, but in vain.  Suggestions?

  Vista Home Premium, Norton Internet Security

  You will need to ask these questions to Windows Live Solution Center.

  It is to the home page:

  http://windowslivehelp.com/

  This one is to Mail Forums - son of Mail section:

  http://windowslivehelp.com/forums.aspx?ProductID=15

• I can't connect to my real account from windows live mail, which can then try?

  I use Windows XP and Windows Live Mail.  I get the following message appears when you try to access my hotmail account for e-mail and more particularly for the calendar which holds my future appointments.

  Can't send or receive messages for the Hotmail (chris_boxall) account. Sorry, we don't have connect you to Windows Live ID at this time. Please try again later.

  Server error: 0 x 80048820
  Server: 'http://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
  Windows Live Mail error ID: 0 x 80048820

  This has been the case for some time, but if I use another user on the PC I can connect.  I can see the account by IE 8.

  What should I do to remedy the situation?

  Windows Live Hotmail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail?tab=all
   
  Windows Live Mail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• Recently, do 800ccc0f with Windows Live Mail IMAP protocol when just read AOL e-mail so I am not idle, but the server disconnected the connection!

  I have Windows 7 Edition Home Premium, 64 bit on an HP G72 laptop. About 2 or 3 weeks, I get error code 800ccc0f when looking at my AOL emails on the downloaded Windows Live Mail program.  I am not idle, as I read my emails in Inbox, but it says that the server has unexpectedly disconnected the connection. So I close the program and restart WLM but the problem happen in say 15 minutes, sometimes earlier.

  This is the IMAP protocol, with port 143 and secure SSL is 0.

  (1) what is the cause for this?

  (2) I have no virus detected by Windows Security Essentials etc.  So is it a recent Windows Update causing the problem, as kb2454826 affected WLM since January 2011? (I uninstall this update kb2454826).

  I also noticed that the problem with the same error code occurs when I delete some e-mails in my Inbox.

  So it is all awkward and Windows Mail on my last laptop Vista was better on the screen, functionality, reliability, and Outlook 2002 on my laptop XP Pro worked and looked better also. I use WLM version 11, I think.

  (3) can Microsoft Windows Mail works on Windows 7, or at least improve WLM to look and work like Windows Mail with better reliability too?

  Thanks in advance.

  SofiaS

  Hi Sofia S

  I use windows live mail version 11 and have an account to imap aol here are the settings I use.

  Right-click on your aol account and click Properties,
  Tab servers make sure that my server requires authentication is checked.

  The tab advanced,
  Mail Port SMTP outgoing # is 587
  Check this server requires a secure connection (SSL)

  Incoming IMAP mail
  Check this server requires a secure connection (SSL)

  change the server 2 or 3 minute wait times, I use 2 and that works for me.

  After clicking on apply and close the window re - open prorperties and check that mail port # 587 outgoing sometimes he stuck back to default settings.

  Hope this helps

• Why contacts "to: Cc: or BCC ' key not make to the top of my Windows Live Hotmail contact list when writing letters?"

  Why contacts "to: Cc: or BCC ' key not make to the top of my list of hotmail contacts when writing letters?"

  Hello Maggie,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• I have the latest Windows Live Mail 2011, but when standby and locks system, the only way out is to do a complete or end of Windows, restart then go into sleep mode. This never used to happen until Windows 2011 has been upated in my PC.

  I forget always at the end of the lIve session of Windows before you put it in standby mode, the PC appears and then lock properly said, in response to anything, so I have to do a reboot complete, very annoying.

  Also when working within Windows 2011, if you add a lot of attachments to an e-mail, I have often to do and then send it, the list of attachments disappear off the screen, so when you send you do not know really which was transmitted, horrible situation, so you must include send to yourself, then you can check what has been sent. Stupid!.

  How can I get rid of these flaws?

  You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft