Windows load with black screen and does not start after windows updates

Similar Questions

• Satellite A135 black screen and does not start

  I have a Satellite A135 with windows vista and I have not used in more than a year.
  I went to use it today and it turns on but the screen is blank. I can't even see not the bios.

  I tried the usual things, connect to a monitor, removed the chip of ram from the back and tried another one, I also tried power alternative only with no luck.

  All the ideas it might be.

  Thanks for the help

  Hello

  If the BIOS page does not appear, then it s a serious question.
  Seems that the motherboard is dead.

  In my opinion, a technician should check this section first, and perhaps you will need a new

  Motherboards are parties, then perhaps it s not an option for you

• Qosmio G40 - black screen and does not start

  A bit of water on my laptop... (bought in 2007, guaranteed on)
  I did not cut power at the time because it did not work properly...

  But, the next morning.
  Start with a black screen, fan is too much work and I have a beep.
  An and after a continuous short beep...

  I opened it and dry all (air cold & mild)... paper to remove moisture.

  but screen remains black, a beep and the fan not working too.

  Please help... What can I do?

  Hey,.

  It seems that water damged your laptop or at least some parts. In the worst cases, you need a lot of new pieces of equipment, but I don't think that an authorized service provider can help you diagnose this problem.

  On the Toshiba site, you can search for them:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Contact them and ask for help. They will help you as much as possible. :)

• Computer has a black screen and does not start. Vista of Aspire5535 Acer base

  As above.  Help please!

  Hello

  If when you start your Acer is no 'Acer' logo splash screen at all and nothing appears on the screen, which would indicate a hardware problem.

  If under warranty, contact Acer.

  If it is not under warranty, use a repair shop, local.

  See you soon.

• 5 CC of Lightroom does not start after 2014 update.

  5 CC of Lightroom does not start after 2014 update. Mac OSX 10.8.5. Tried the suggestion to sign out of cloud of Adobe and reconnect. Also restarted computer. No luck. Photoshop CC 2014 seems to have installed perfectly. Can not install the previous version either, can still find Adobe cloud. Tried to re - download from the Adobe web site, but that's where saying 'Download now'-, but nothing is downloading!

  Thank you, this was not the problem for me. Both have been set read/write. Finally, I downloaded the "demo". It installed fine and seems not to be re-registered.

• Windows does not start after the update...

  Hope someone can help with this,

  I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

  L.Butler,
  Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
  Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite P300 - 1 H 9 does not start after the update of the BIOS didn't

  I perform an update BIOS, but before the update was completed second shortly after), the laptop has been frozen and is not used to shutdown evenn if hold start buton. So I disconnected the battery and plugin power after that I have reconnceted the plugin from power, then press the power button, it showed a black screen and i heard a
  beep (1 long, 2short)
  CLR CMOS can solve the problem?

  Where the rider is to do the reset?

  P300 - 1 H 9

  Thank you very much...

  Hi mate

  Seems that something was wrong during the BIOS update process.
  Usually the BIOS update should work correctly but the BIOS update is always sensitive technique and something like that can happen.

  Usually the CMOS must be cleared first and then the ROM module must be flashed again. This can be done by an ASP.

  Be in contact with an ASP in local guys help!

• Mail does not start after the update of EL Capitan 10.11.2

  Many applications do not work (do not start) after my Mac Book Pro with El Capitan 10.11.2 update:

  -Mail

  -Time Machine

  -App Sore

  How can I fix this?

  -First data backup. Since you said TM does not work you will need to use another method

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable, reinstall the OSX. Nothing shall be lost.

  How to reinstall OS X on your Mac - Apple Support

• iPhone 5s does not start after the update of 9.3.3

  I upgraded my iPhone to ios 9.3.3 5s.

  Subsequently, he asked my security code, but would not accept.

  I stopped the phone and now the phone does not start.

  No nails?

  Hovel3 wrote:

  I upgraded my iPhone to ios 9.3.3 5s.

  Subsequently, he asked my security code, but would not accept.

  I stopped the phone and now the phone does not start.

  No nails?

  What you exactly mean you stopped the phone? In fact stop what exactly?

  The password should be the same, I updated my phone and ipad yesterday and was able to use my password.

  You may need to do this:

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Does not start after the update to the Mac OSX 10.6.4 3.6.6

  Have updated the 3.6.6. on OS x 10.6.4. Installed according to the instructions, but FF does not start - the application folder or the dock (where I did drag the icon of FF). Looking at the support forum, it seems a number of people have the same problem, but no miracle appear to be sent!

  User Agent

  Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_4; en - us) AppleWebKit/533.16 (KHTML, like Gecko) Safari/533.16 Version/5.0

  Is the second time that happened and the solution is to continue to work.

• Windows did not accept the new updates and now still load with black screen and mouse rather than launch windows LOGIN

  
  

  Ideas: Troubleshooting/System Restore/Driver Updates

  • Troubleshooting took an installation point so-called drivers but never completed
  • System Restore worked initially but has now got to a point where he restores to where it will be updated and currently not load new windows
  • Recently replaced the hard drive in this laptop with a new copy of windows 7. Corresponding model
  • The only thing I have not tried is reinstalled, but then even if I did that would stop this from happening?

  ,

   
   
   
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
  Method 3.
  Step A.
  If the bows persists please verify if you are able to boot safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  Step B.

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
  Method 3.
  I recommend you to restore system using a Windows 7 DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
  
   
  If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Equium P300-19O - black screen and does not restart

  My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
  I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

  Please suggest anything that could help me get the laptop again.

  Hello

  Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
  Maybe you can also try a system restore to a previous state.

  If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

• Satellite P200D - black screen and does not just by running

  Hello everyone, I have a Toshiba Satellite P200D - 107 PSPBLE with configuration set-aside:

  Processor: Turion x 2 TL - 52 64-bit clocked at 1.6 Ghz
  Display: 17.3 inch
  Graphics card: Ati radeon x 1200
  RAM: 2 x 512 MB ram (1 GB total) which I upgraded to 1 x 2000 MB and 1 x 512 MB (for a total of 2.5 GB)
  OS: FACTORY CD WINDOWS VISTA HOME PREMIUM 32-BIT
  Power: Running on the direct power without the battery cable

  Although the pc is quite old sound fundamentally new barely there 1 year of normal use on it.

  PROBLEM:

  The screen goes black (no), even if the screen still has the backlight running, the laptop is still under tension, but its basically in a kind of deep hibernation with the fan running yet.
  The laptop screen turns off 5-10 minutes after windows loads, even if in idle, it also stops during installation of the operating system.
  I tried to run the music and the music stops when the screen goes black made all the hard disk activity which I believe indicates that it is not related to the video chip.

  TRIED SO FAR:

  1. open up the computer laptop and cleaned all dust processor, now CPU temp is 50 max, even for hard disk
  2. update the bios to the original to 1.70 - did not help
  3 connected external monitor also stops it the same time as the laptop screen indicating it is not not a screen issue
  4 reinstall OS several times
  5 tested memory with memtest64 - no error
  6. test the hard drive with hddregenerator - no error

  What I've noticed:

  If I leave just a 512 MB of ram in the laptop then the laptop stops not at all even in windows applications, tried to launch a game to remove video card and it works without problem for hours, but as soon as I add the stick of 2 GB or another origianal 512 stick it will go inside the black screen 5-10 min (or earlier) to get into windows.

  He never stops in dos mode (as in memtest, hddregen) even with 2.5 GB of ram.

  After that the screen goes black, if I stopped and then try to save, it it won't work at all, the screen stays black with the fan spinning and boot CD, I must absolutely disconect the power cord power and re - set before it starts again.

  Anyone has any ideas, I am experienced with the pc, but have never stumbled upon something so weird that I have just can't explain this problem that came straight from heaven.

  Toshiba to wake up, this forum is a total joke, you would think that you would be able to afford hiring a bunch of technicians to actually help people rather than rely on the users of the forum to do your work for your, you don't need to have a forum, if you don't have the staff to actually help people solve their problems.

• Computer has a black screen and does not show the normal startup logo and more

  The computer that I use usually works well, until the next day, the day that I used it, ruined everything. My computer shows not the Windows 7 logo normal at startup, but instead, a bar with green lines in movement like the ones you see in older versions (Windows Vista), but now only the bar and did no logo in it and after starting does not display. It shows a completely black screen, but it makes a noise like the sound when she welcomes you to Windows 7. I tried safe mode and disabled the NVIDIA GeForce GT 220 graphics card and the screen works, but he is stuck at 800 x 600. In addition, the start screen is always the bar. How can I fix it? (Tried updating the gpu but still displayed black screen)

  Hello Rafael,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest to start your computer in safe mode, uninstall the display driver, restart your computer in normal mode

  mode and update driver from the website of the manufacturer of the computer display.

  Please see this link:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• MacBook Pro glued on the gray screen and does not start. Help, please!

  Hello

  My 13 "MacBook Pro (mid-2009), running Snow leopard (10.6.8), has finally given up and won't start.

  I tried to boot into SafeMode several times, but the loading bar does not move and the laptop just completely stops.

  I also tried to boot in single user mode with the command fsck - fy, but this results in the following:

  disk 0 s 2: I / 0 error

  Invalid node structure

  (4,35296)

  * The Macintosh HD volume could not be completely checked.

  / dev/rdiskOs2 (hfs)

  You leave with signal 8

  I guess that means that there is something wrong with the hard disk and some corrupt files?

  My problem is that I have no time machine backups, so I would like to know if it is possible to do something to get to the top and running.

  That, I do not have an external drive with my main important files and photos on a failure, so is it possible to completely erase the computer so I can sell it at least?

  I really need help on what I've been driving myself crazy trying to figure it out!

  I'm not all techniques with regard to the material. I tried doing research and have seen things, which suggests that I should reinstall the OS X, this would imply in the disks provided with the laptop when the power?

  Any advice greatly appreciated!

  Boot from the DVD and run the check/repair disk utility and repair permissions until you get no errors.  Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system.

  When you restart, use Setup Wizard to restore your data.