Windows logon fails when network drive mapping

Similar Questions

• I can't use windows Explorer or the network drive mapping to access my NAS drive more.

  original title: strange NAS problem

  Hi everyone I can't seem to fix this strange problem.

  I can't use windows Explorer or the network drive mapping to access my NAS drive more.
  I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.

  The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.

  Here is some info.

  I can access to other computers and devices on my network.

  I can access the internet.
  I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
  I PING the NAS drive.
  The NAS drive will do the same if connected via cable or by wireless.

  UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.

  Help, please.

  Thanks for the help, but I fixed my problem

  Here's what I did in case anyone wants to know.

  I went into Device Manager and went to network adapters.
  I then expanded this section and under view changed to display hidden items.
  Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
  Then click scan for new hardware.
  And... everything works again! YAY!

• Windows 7 x 64-network drives mapped disappeared following updates

  Since this morning, all network drives mapped our Organization have disappeared.  More than 85 users being affected.  By a process of elimination, we have reduced the problem to local machines running Windows 7 x 64.  We have also several PCs 10 Windows which are not affected.  We have also two PC of Windows 7 that have not activated the Windows updates, and both have no problems with the drive mappings.

  We go through the deletion process of upgrades that were completed this morning (03:00).  I will provide an update as soon as we find the root cause.

  Can we get some guidance as to a specific update that can affect the drive mappings?

  UPDATE 2 *.

  We have solved this problem by uninstalling the following Windows updates:

  Update for Microsoft Windows (KB3139923)

  Update for Microsoft Windows (KB3140245)

  Update for Microsoft Windows (KB3162835)

  Update of security for Microsoft Windows (KB3159398)
  Update of security for Microsoft Windows (KB3161561)

  (After removing these updates and reboot, it should also ask users to close the session and sign in again until the mapped drives returns.)

  REF. https://support.microsoft.com/en-us/kb/3163622

  "Symptoms."

  All the user group policy, including those that have been filtered on security groups or user accounts, or both, security may not apply on computers joined to a domain. This problem may occur if the Group Policy object has the read permissions for the authenticated users group or if you use security filtering and lack read permissions for the domain computers group.

  Resolution

  To resolve this problem, use the GPMC Group Policy (GPMC. MSC) and follow one of the following steps:

  • Add the authenticated users group with the permissions to read on the Group Policy object (GPO).
  • If you use security filtering, add the computers group to the domain with the read permission. »

  -------------------------

  We solved this by adding authenticated users to the scope of the Group Policy object.

  (KB3159398 seemed to be that the cause)

• How to remove network drives mapped Windows 7.i can't get to delete.pls help me to solve it.

  How to remove network drives mapped Windows 7.i can't remove. Already disconnected, but still its disk showing with red cross.i am not able to create new drive with the drive letter of Red Cross, pls help me to solve it.

  1. open a command prompt.

  2 in the command prompt, type the following command and press ENTER.

  NOTE: replaced by z: in the command below with the actual drive letter of the mapped network drive that you want to cancel your computer window (deletion) mapping .

  • NET use Z:/delete

  3 when finshed, close the command prompts. So the mapped network drive shoud be removed from the window of your computer.

  Kind regards
  J Chambers

• My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

  My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

  Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

  Hi,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• Windows build fails when add 'cordova-plugin-camera' + 'cordova-plugin-contacts'

  all the details here

  Windows build fails when add 'cordova-plugin-camera' + 'cordova-plugin-contacts'

  Resolved in the thread on the GS.

• network drive mapped 2003 server need stay connected after journal so that when my script is scheduled to run the player will always be mapped.

  2003 network drive server need mapped stay connected after journal so that when my script is scheduled to run the player will always map. ??

  Hello Scott,

  This is not the right forum for issues with Windows Server 2003.
  Please click the link below to ask your question in the appropriate forum TechNet.
  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

  Thank you

  Marilyn

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.

• Why my network drives mapped reconnect when disconnected from my laptop?

  Whenever I have withdraw my machine it fails to reconnect to a network drive while you are using the wireless. It's quite strange, because if I anchor again it not is not even reconnect on LAN.

  Hi gabrielcervatiuc,

  Connected and disconnected are two different hardware configurations.

  Therefore, you use control different sets in the registry. You must configure the network drives in two configurations.

  Hope this information is useful.

• Error on the network drive mapping

  Hello

  From an XP machine, to another XP machine which is used as a server temporary database (with just the back end of a split MS Access database) I get the following error trying to map a network drive:

  Error loading Setup50045.fOn

  A dll initialization routine failed.

  There are about 9 other users that connect successfully to this shared drive, and this particular user, logged in as long as another user in the same machine, map this drive without any errors.

  Please if anyone can help.

  Thank you in advance!

  Hi PsyberFox,

  Method 1

  I suggest that you perform the restoration of the system to the point while it was working fine.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2

  If the previous step fails, see if the problem persists on a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Method 3

  If the previous step fails, then you need to repair the Windows XP installation and check if it helps.

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• Windows 7 saved shared network drive the forgot/lost password

  I work with a small network of average office with windows about 20 computers all 7 and we have a computer of Windows 8, acting as a file server. all desktop computers are set to automatically connect and map network drives and save the password. Password not changed everyone was able to connect, except a single computer of users who suddenly asked the password on the server again. Given the same password correct, which I memorized by now, and everything was fine and yes I have checked the box to remember the password twice. Boss is not happy that computers does not...

  all, but the server is wireless.

  For starters, it is the file server password and not the wireless. Yes, I have just add it again, it has never happened to me before. But don't get started me on the wireless, in this building, there are some 30 different networks.

  Problem is solved, but the cause is undetermined.

  should I wait for that to happen on other computers 20 +? Or give the "password" for everyone.

• How to record TV with Media Center (Windows 7) to a network drive?

  Well, you would think that the new MediaCenter Windows 7 would live up to the recording of your TV for a network/player sharing. Nevermind, it seems that it is just not possible.

  I have a windows 2008 R2 server and a Windows 7 machine with a TV card. Since my server has 2 TB of storage, it would be nice to save directly to a network drive. (I rode like Z :).

  I tried the following:

  1. By selecting Media Center itself: does not. Is not available.
  2. Editing the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Service\Recording to RecordPath Z:\TV. Does not.
  3. Editing the registry: set RecordPath to \\server\TV. Does not.
  4. Create a symbolic link (mklink \D) of Z:\TV and \\server\TV with parameter in the registry under RecordPath.

  I am currently out of options. I could of course install Windows7 on my server, but I have no license for this, and my windows 2008 r2 is free from dreamspark.

  So: How is the world possible to make this work? And why not just MediaCenter detects my network sharing?

  Record on the network is not supported.  The smallest hiccup of network could cause problems with registration, or even TV live as the recording buffer would be located at the remote location.

  One thing you can do is to use Windows Home Server Power Pack 3 and its function of archive TV which you can configure to automatically move all your records or only those you want.

• On the installer of Windows 7 backup to network drive, how to avoid the user name and password?

  I have Windows 7 x 64 Pro on a PC to my home network 2-computer. Back up my files on a 1 GB network drive using outdated software. I would use the backup of Windows in the same way, but I'm stuck at the first step in backup: "what is my username and password?'." " I have no need to use either as well as single-user computers and log on automatically.

  How can I convince backup W7 to accept that they are not needed? Otherwise how can I, with the status of administrator, either:

  1. check if there is an existing id/password?
  2. If necessary, set up a new id and password without harming my Autologon class?

  Hi Hershmab,

  Thanks for the reply.

  The question that you are running in suitable for the forum on the link below.

  http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/.

  Please report if you encounter a problem with Windows. I will be happy to provide you with additional options.

• How is it, windows XP or Windows 7 cannot see network drive?

  first of all, I have 5 computers.  Installed with Windows 7 installed with Vista and 1 2 3 MacBook Pro.  I created 1 network drive to more easily move files named "ShareMe.  All the protable can use the shared folder since I gave permission to everyone.  All the computer can use the network printer.  I installed Windows 7 on a Mac using VMware 2.0.5 and able to print using printer network with no problems.  I installed another Windows 7 on VMware Workstatin on a PC, and it can use the network also printer without any problems.

  (Everything is legitimate and so far I just was not updated to 2.0.6 because I heard a lot of things to have a slow speed)

  That is the problem, not an operating system that runs on VMware can't see my shared folder in the network, it cannot see networked host computer.   I speak not shared folder between VMware and the computer host.  Between the host and VMware are very well; However, I'm talking about that all shared folder the computer can see (folder ShareMe).

  All in the same workgroup

  Using NAT to network adapter

  Tota1 wrote:

  Using NAT to network adapter

  This is the problem because it puts the virtual machine on a separate subnet, then the one on the host is.  Past to open and release/renew IP on each virtual Machine.

  Take a look at: Understanding Networking in VMware Fusion

  Tip: With a Machine virtual Windows switch between NAT and connected by a bridge or visa versa, can be made without restarting, or even by using ipconfig to release/renew the IP address.  Simply toggle the State connected/disconnected from the network of the <...>Network icon on the status bar from the type of network between the two. It takes but a few seconds and a few clicks and is faster and easier the alternative methods.

• Cannot map my Windows 7 Home Premium network drives

  I recently bought and installed a NAS (Dlink DNS-320).

  I am able to map actions on the NAS using my Win XP computer, mapping \\NAS-IP\MyShare
  When I try the same thing on my Win7 Home Premium, I get an error message indicating that\\NAS-IP\MyShare is not accessible.

  I also tried connecting by specifying usernam + password, but no combination I've tried seems to work, I constantly Gets a new pop-up window asking med to specify the user name and password.

  When surfing the web I found a lot of posts with the same problem that I am experiencing, but so far none of the solutions worked for me.

  I would really appreciate the help on this.

  Kind regards
  Roger

  Hi roggabear,

  I suggest to start in safe mode and check if the problem persists. To do so follow the steps described in the article below:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the issue does not occur in safe mode, you can try to clean boot and fix the problem:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: After the troubleshooting steps please return the system to Normal startup. Then follow step 7 in the above article.

  I also suggest you to follow the steps mentioned in the links below and check if they help to solve the problem:

   http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

   http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

   http://Windows.Microsoft.com/en-us/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

   http://Windows.Microsoft.com/en-us/Windows7/open-a-port-in-Windows-Firewall

   http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  I hope this helps. Please let us know to get help.

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.