Windows machine is in a constant reboot loop. HP has been working on the device and there is no hardware problem. Microsoft support said there are corrupted in windows files and we were able to repair windows.

Similar Questions

• has deleted part of the key of windows vista which has been integrated with the laptop and when I start the laptop it asks activation, what to do, please give solutions

  the sticker on my laptop has disappeared/deleted and I am not able to see the full key for windows vista operating system has been pre-installed on the laptop and now she asks activation and I did not quite correct key because he got faded/deleted, how can I get the key to work on the laptop I have compaq-presario-cq60-420 US laptop.please help me or give me the microsoft contact numbers where I can get my key of windows vista back by providing the serial number and the product number for my laptop.  I am unable to work as the laptop does not work without the activation key.

  Hello

  You can use a magnifying glass and a flashlight to see if you can read the numbers of the product key on the label.

  Or take a picture of it and expand it on the screen.

  ______________________________________________________________

  Also that, read also:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks and to reinstall the operating system.

  They should do this for a fee, if they still have available to them.

  _____________________________________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  ____________________________________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• Virus on my computer. Windows Vista has been altered by the virus and my computer does not have a product key

  My computer caught a SERIOUS virus that damaged my beta Windows Vista together. So I've upgraded to Windows 7, however, I have not the key product for Windows Vista or 7. Is it possible to set this up with Windows Vista or 7 because my product key for computers, which was at the back of it, has been erased or worn. There is no name on the back of my laptop sticker saying what product key to use. Thank you!

  Friday, February 11, 2011, 05:49:31 + 0000, EShoals wrote:

  My computer caught a SERIOUS virus that damaged my beta Windows Vista together.

  What virus? How did you know you had it? You run an anti-virus
  the program? Which one? Is it updated? Why don't you use not to
  remove the virus?

  So I had to upgrade to Windows 7,

  Ugh! The upgrade to a different version of Windows does not remove a virus. In
  did the upgrade when you have a problem is always a bad
  thing to do and will be much more likely to make the problem worse than in
  solve it.

  However, I have not the key product for Windows Vista or 7.

  Where have you upgraded to Windows 7? Upgrade to a
  legitimate version Windows7 is a bad thing, but if you went to one
  a pirated version, it is likely to cause additional problems and you
  are probably in trouble now and need to clean install a
  copy legitimate of some versions of Windows.

  Is there a way to set up in Windows Vista or 7 because
  my product key for computers, which was at the back of it, has
  has been deleted or worn. There is no name on the back of my
  laptop computer sticker saying what product key to use. Thank you!

  The product key on the back of your laptop is for what version of
  Windows it came with and may not be used for all other versions. If you
  don't have a product key for Vista or Windows 7, the laptop
  no doubt supplied with XP. Is this correct?

  If it came with XP, it is very old and it is almost certainly elsewhere
  low power for Windows 7. In addition the drivers you need for Windows
  7 there are almost certainly not, and you will not be able to run
  Windows 7 on it.

  At this point, you are probably in trouble no matter what you do. You
  must reinstall Windows XP itself, but you no longer have your
  product key and you probably haven't a Windows XP CD no more. You
  can try to ask the manufacturer of the laptop to a XP CD and product
  key, but I doubt if you can get at this late date.

  You can buy a copy of Windows 7, but once, you are likely in a way
  low power for the drivers you need and it will be unavailable.

  Ken Blake (MS-MVP)

• try to uninstall antivirus but before it's over says windows program has stopped working, send the report and closes. Not allow me to complete uninstallation.

  Is avast and I turned off but windows is not allow me to uninstall it. whenever I try, I reaches the end of the uninstall and windows says that avast has stopped working, he tries to find a solution, and then forces me to close the whole process. am I missing something here? How can I uninstall this antivirus please? I looked around everywhere through troubleshooting and there not all that is useful.

  Hello

  Download and use the Avast Uninstall Utility on the link below

  http://www.avast.com/uninstall-utility

• Error during the download of Windows 8 on Windows 7: "download failed. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »

  Currently, I have Windows 7 and had to buy Windows 8 for the school. I tried downloading it several times, but when she writes the check, it is said, "Download unsuccessful. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »

  I don't know what to do.

  Original title: download Windows 8 Windows 7

  Hello Travis,

  Thanks for posting your question on the Forums of community of Microsoft.

  To better understand the issue please help us with these questions.

  from which site you try to download Windows 8?

  b. what browser do you use to download?

  c. you try to download a full version or update?

  d. you run the upgrade wizard before trying to download the Windows 8?

  This problem usually occurs due to the installation of Web the contents of the folder in the system. So, now, I you suggest to rename or delete the installation folder to the following location and then try to download Windows 8:

  C:\Users\\AppData\Local\Microsoft\Web install

  See also the link mentioned to follow the correct steps before and during the installation of Windows 8 below:
  How to upgrade to Windows 8

  Note: I strongly recommend to back up all your important files and folders on an external storage device before performing any type of upgrade of the OS.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I have recently updated my laptop to Windows 10 and can now access Lightroom, I had the same problem before, when I upgraded and you were able to walk through the changes, can advise you?

  I have recently updated my laptop to Windows 10 and can now access Lightroom, I had the same problem before, when I upgraded and you were able to walk through the changes, can advise you?

  It seems that there is a problem with the graphics card.

  Please try the step under the troubleshooting topic: Adobe Lightroom GPU troubleshooting and FAQ

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• There are a lot of files like KB950762.log in c: Windows. What are these for, and it is safe to get rid of them?

  n c: Windows there are a lot of files like KB950762.log. What are these for, and it is safe to get rid of them?

  These are log files from your windows updates. They could be used to help solve problems of update, but if you experience any problems, they can be removed safely.

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

• Hallmark Card Studio will not open? I have Windows 7. He has been working

  HALLMARK CARD STUDIO 2010 WILL NOT BE OPEN. I HAVE WINDOWS 7. HE HAS BEEN WORKING.

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message when opening it?

  You can follow the methods below and see if it works very well.

  Method 1

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: after a follow-up of troubleshooting Step 7: reset the computer to start as usual

  Check whether the problem is resolved.

  Method 2

  If the problem persists, you can uninstall and reinstall the program once more and see if it works very well.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can re - install the program on the site of the trademark.

• Can't access the "devices and printers" in Windows 7

  I'm unable to access the "devices and printers" menu in windows 7 (32)

  When I click on the menu, it crashes just a white screen and never load.  I checked the print spooler service and it is running...

  If you have installed McAfee software that can block the enumeration of objects in devices and printers.  Make sure that the Bluetooth service works also if you have any compatible bluetooth devices. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• My bi-ecrans Setup has stopped working with the latest update of Windows

  My bi-ecrans Setup has stopped working since the last windows update.  The second screen is relegated to never turn on and in the part 'View' of the Control Panel, I can't change the 2nd monitor resolution of anything in addition to 480 x 640.  I installed the latest drivers for the video card and two monitors.  I have everything down, powered, entretienavec left for a few minutes and fed up, nothing.  It has been like that for a few days now.  Any advice would be very useful,

  Thank you

  Tyler

  Details:

  PC: HP Compaq 8200 Elite

  Graphics card: AMD Radeon HD 6500 Series

  First monitor: ViewSonic 2030

  Second monitor: Dell 1908FP

  All pilots are underway according to Dell, ViewSonic, AMD and Microsoft.

  Latest patches from Windows Update killed my dual Setup monitor:

  Update of security for Microsoft Office PowerPoint 2007 (KB2596764)

  A security update cumulative for the stop bits ActiveX for Windows 7 for x 64-based systems (KB2618451)

  X 64-December Windows malicious software removal tool (KB890830) 2011

  Update security for Windows 7 for x 64-based systems (KB2620712)

  Update of security for Microsoft Office PowerPoint 2007 (KB2596912)

  Update for Microsoft Office Excel 2007 (KB2596596)

  Update of security for Microsoft Office Publisher 2007 (KB2596705)

  Update of security suites for Microsoft Office 2007 (KB2596785)

  Cumulative Security Update for Internet Explorer 9 for Windows 7 for x 64-based systems (KB2618444)

  Updated for suites Microsoft Office 2007 (KB2596651)

  Update security for Windows 7 for x 64-based systems (KB2639417)

  Updated for suites Microsoft Office 2007 (KB2596789)

  Update security for Windows 7 for x 64-based systems (KB2619339)

  Update for Windows 7 for x 64-based systems (KB2633952)

  There is no update stated in your post which could have implications on your graphics card, or its driver.

  Have you installed the latest graphic driver AMD in the AMD site?

  http://sites.AMD.com/us/game/downloads/pages/radeon_win7-32.aspx

  NB this link is the 32-bit win7 driver.

• I get the message that adobe InDesign CC 2015 has stopped working. I updated and rebooted and still not be able to get.

  I get the message "Adobe InDesign CC 2015 has stopped working". I updated and rebooted and still impossible to get. Help me!

  Hello

  See the following topics:

  Adobe InDesign CC 2015 has stopped working

  Adobe indesign cc 2015 has stopped working

  Adobe Indesign CC (2015) has stopped working error

  Let us know if you need additional assistance.

  Kind regards

  Shelly

• My iphone will not suddenly be updated to icloud photos?  It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc...  can anyone help?  well worked yesterday and now not...

  My iphone will not suddenly be updated to icloud photos?  It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc...  can anyone help?  well worked yesterday and now not... most of the time the number of photos don't match same new how I am download to icloud...

  Have you tried the signature to iCloud and then reconnect?

  Try a reset.

  Reset device

• I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  It seems that your version is not the latest.

  Check help / about... what version it reads.

  It should be 2015. (9.2.0 build 41)

  Otherwise, please update your version via app updates... or cloud in respect of aid.