Windows Mail - can't find the receiver on my imported "sent items".

I recently exported all my old articles 'sent' to a backup location and then removed from Windows Mail.  Today I imported them insert it again but the folder imported lists not the recipients, just the sender (me!) - how can I fix?

Go to view | Columns and activate the different fields in the record.  The recipient will also show if you open the message.  Is it not?

Steve

Tags: Windows

Similar Questions

  • Windows 7 can not find the network

    Hi guys I hope that someone can help me, I walked trough the forums but none of the above helped me. I also do not really understand some of them. But that's what happened. My internet was fine yesterday, I was watching some stuff on aliexpress when my mouse froze, I tried to restart the laptop, but nothing worked so I had to remove the battery. After that the computer took forever to turn back and when he did my computer did not find my wifi more. I ran the following anti-virus, I tried the steps in the verification of all past system. I went in Sync Center, I have trid addition in manual, I tried to search for a wifi switch (I don't think I have a) I tried to restart the pc and the internet, I tried the system restore, I don't really know what else to do. Any suggestions?

    Hi Kate,.

    Thanks for posting your query in Microsoft Community.

    I understand that Windows 7 can't find the network and I appreciate the efforts made to try the patches. Let me ask you;

    • Restoring the system led?
    • What exactly happens when you try to connect to the Wi - Fi?

    This could be due to several reasons, including any third party software conflict. Try the following methods and check.

    Method 1: Start the computer in Mode safe mode with network and check if the problem persists. If the problem does not persist in SafeMode with network, put the computer in a clean boot state and check.

    Step 1: Start the computer using safe mode with networking

    Safe mode with networking is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Safe Mode with networking appears in the corners of your monitor to identify which Windows mode you are using. You can use the internet connection in this mode.

    Please refer to: , start your computer in safe mode

    Step 2: Perform a clean boot in order to avoid any conflict of third party software.

    To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

    Method 2: Update the network adapter

    Step 1: Update the driver through Device Manager

    a. click Start , type Device Manager and click on it

    b. expand network adapters

    c. make a right click driver, and then click Update driver software

    Step 2: Install the Windows updates pending

    To check the updates:

    1. Open Windows Update by clicking the Start button . In the search box, type Update, and then in the list of results, click Windows Update.
    2. In the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

    3. If you see a message telling you that important updates are available, or you say to look at the important updates, click the message to view and select the updates to install.

    4. In the list, click the important updates for more information. Select the check boxes for the updates that you want to install and then click OK.

    5. Click install updates.

      Read and accept the terms of the license and then click Finish if the update requires it. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Step 3: Visit the computer manufacturer's support Web site and install the latest network for Windows 8 for the same model of device drivers.

    Additional information:

    Wireless and wired network problems

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • Can't find the business district after importation

    Hi all

    I use Discoverer 10 g and I exported a business district and tried to import the business district in another case, I was able to import the business successfully district, but I can't find the business district in the list available in business districts.

    Please help as soon as possible.

    Thanks in advance.

    Hi David
    After the initial, but before you import revoked the privileges without doubt you could see the business district?

    In the administration tool your administrator must be a user Apps - typical SYSADMIN.

    The EUL owner is only the repository for tables and should not be used to administer access following the initial creation and the business districts. One of the first steps should be to reassign the administrative rights on all business sectors to SYSADMIN. Then, you use this account to grant access.

    Have you granted SYSADMIN administrative rights inside the EUL? This, in two places, while it is connected as the owner of the END user license.

    1. use tools | Privileges to SYSADMIN has granted administrative functions
    2 use tools | Security and grant access to all sectors of activity of SYSADMIN
    3. make sure that you check the little box called enable Administration before clicking on the OK button

    In addition, when you imported the user business district were you logged as? Have been connected as long as the owner of the END user license or the application administrator? You should use the Apps user who, as I say, you are strongly advised to use SYSADMIN.

    Best wishes
    Michael

  • Windows 7 can not find the driver for shared printer hp LaserJet 3380

    When I try to add a shared printer on my laptop Windows 7, as a network printer, Windows 7 it locates on the network successfully, but I get the following error messages:
    Windows cannot find a driver for hp LaserJet 3380 PCL 6.
    The file ' *. INF' (unknown) is needed.

    The printer is connected to a desktop pc XP on my home network.

    I tried to attach the printer locally via USB to the Windows 7 laptop and loaded correctly the printer drivers and I printed it. But when I reconnected it the printer on the XP computer I got the error again.

    It is shared, not a network, printer, in order to put up with the TCP - IP option does not work.

    This printer successfully under Vista. I did a clean install of Windows 7.

    Thanks for any help you can provide.
    Jim

    The name of the 32-bit driver is different from the name of 64-bit driver.  You create a Local Port which will basically copy the formatted print data from the part of xpmachine.

    This is the KB how to perform this task
    http://support.Microsoft.com/kb/282842

    on Windows 7
    Add a printer
    Local printer
    Add to the local path
    \\XPMACHINE\printersharename (make a word share name or you must ' "quote all)

    Select the installed driver if you have connected the USB device

    Complete the wizard

    test page printed.

    Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

  • Need help badly - WIndows 7 can not find the Xbox and Xbox can't find Windows 7

    This is the case, for the last 6 hours trying to connect my PC and Xbox. I am running Windows 7 and tried everything I could find on the internet for this problem. All my services are enabled firewall disabled, participation is. When I look at my network card, I see my Xbox (see photo below). However, it is the only place I see. My PC is going through wifi and the xbox is connected to the router. Why is the only place where I can see the Xbox? Any help would be great, I'm about to throw this piece of * by the window.

    Hello

    The question you posted would be better suited in the Xbox Forums; We recommend that you post your question in the Xbox Forums to get help:

    Xbox forums: http://forums.xbox.com/

    Welcome to the Xbox support: http://support.xbox.com/en-us/home

    Keep us informed on the status of the issue.

  • Windows 7 can not find the driver for the shared printer, IBM infoprint 1352

    through the network, that I have connected to my infoprint 1352 (on a XP machine), but when my 64-bit machine w7 is to install the printer, he said:

    'No driver found - windows cannot find a driver for IBM Infoprint 1352 on network. To locate one manually, click on OK. Otherwise, click Cancel and consult your network administrator. »

    When I click CANCEL, another window comes up with "unable to find the" * INF 'pilot'. "

    Help

    Hello

    The IBM infoprint 1352 is not compatible with Windows 7 64 bit and this must be the reason for the question.

    For more information see the link below.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=IBM infoprint 1352

    I suggest you to refer to the link provided below for the list of the drivers for the printer.

    http://www-01.IBM.com/support/docview.wss?uid=psd1P4000300

  • Windows Mail - Can't delete emails from any box (Inbox, deleted items, items, etc...).

    In October, my Windows Mail simply stop allowing me to remove anything.  I noticed it first in my Inbox, so I went to my "deleted items" empty to make (thinking that it was question) instead, but found that I could not delete individual emails or use the tool to empty folder.  Windows Mail doesn't allow me to delete ALL emails from ANY folder, so now I need to access my emails on the internet, but it's a pain that my address book is in position.

    I googled solutions and tried a few corrections people recommended when they are unable to remove files from a single folder.  They don't solve anything.  I thought corrupted program so I would update and downloaded Windows Live Mail hoping to fix it, but same problem remains.

    Error message when you try to delete individual reading by e-mail: "Message could not be deleted."  Error message when you exit the program: "certain elements in the"Deleted items"folder cannot be deleted.  An error has occurred. "Nothing specific, but ANY element of ANY folder can be deleted.

    Hello
    I have disabled virus protection and were able to get into my box removed and delte the bad email.

    Thanks for the help

  • Basic folders - Windows mail - Vista not visible on home page (Inbox, Outbox, sent items, deleted etc.

    Vista Basic - Windows mail. I'm used to Outlook XP. All records of files such as Inbox, Outbox, sent items are displayed in Outlook. They are not displayed in my windows mail. How can I get the visible while checking and sending e-mail.

    View | Page layout | List of folders. Check it out. Bruce Hagen MS - MVP [Mail]

  • I have a windows vista Home premium and want to connect to a network that is set up on a workstation after running windows 7 can not find the network why?

    Why my computer running windows, find a different network than the vista of cant

    If collective housing is installed on the Windows 7 computer, only Windows 7 computers can join a home group.

    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    Networking of computers running different versions of Windows

    This article describes how to configure files and printers, sharing on a home network with computers running different versions of windows.

    See you soon.

    Mick Murphy - Microsoft partner

  • Computer dell laptop windows 7, can't find the driver for my dell printer 810. Help please

    Hello

    My parents just got a laptop. It's a Dell with windows 7. The installation went well independently to get software of the printer device. I tried the troubleshooting, and who could not find a driver. So now I'm not sure that the best thing is to do. The printer is a dell 810. Someone at - it advice, everything is welcome.

    Thank you very much

    http://support.Dell.com/support/downloads/index.aspx

    http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • HP 1315 all in one printer, windows 7, can not find the solution Center.

    Mr President

    It was working fine, 1315, printer all-in-one. lately every print, I had off and ON the machine. Today, to uninstalled and then downloaded from the additional driver section all the reqd. I installed. but the main exe from the file ' AIO_CDB_NonNet_Full_Win_WW_130_141 '.

    do not settle. ...

    " Solution Center is not installed and to get hp support, I downloaded hp printer scan cylindre diagnosis and when I run... another message comes" hp photosmart essential scan.msi isn't available... what shud I do?

    I don't know what to do next?

    kindly help.

    Hello pajitmenon,

    Seems that the installation of the software is corrupted somehow. I recommend "rubbing" the software current and 'nine '; To do this, follow the instructions below:

    1. click the Start button and type %temp% enforcement

    2. Locate and open the folder starting with 7z (example: 7zS2356)

    3 open the Util folder

    4 open the CCC folder

    5. run the L4uninstall.bat

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://get.Adobe.com/flashplayer/

    9 download (again) the drivers and full software functionality from the link below

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1 & CC = US & DLC = in & LC = on & os = 4062 & Product = 374568 & sw_lang =

    10. run the download to reinstall the printer

  • Where can I find the videos that I imported from my iPhone?

    I connected my iPhone and used the Import Wizard to import pictures and videos.  Once the completed import Windows Photo Gallery opens and displays all the photos of 418, but I do not see the 46 videos that are in my Camera Roll.  When they are registered or have I just missed a step?  Thanks in advance for the help!

    Hello

    1. have you checked in the libraries of the video section of Windows Explorer?

    You can also search by names of video in Windows Search , made a special right-click on a video file and selecting 'place of the folder', in this way, you know where the video files are.

    You can also check for them in Itunes.

  • Director of Windows can not find the file

    I made a presentation / film in windows movie maker, and it worked fine.  Then when I went to access the movie a month later, all photos in the film are absent, and the Director of windows message can not find the file you want to locate the file... There are a lot of pictures, I don't want to go to each of them... What's happening on why it does not find the photo files now?

    I made a presentation / film in windows movie maker, and it worked fine.  Then when I went to access the movie a month later, all photos in the film are absent, and the Director of windows message can not find the file you want to locate the file... There are a lot of pictures, I don't want to go to each of them... What's happening on why it does not find the photo files now?

    =============================
    The source files have been moved or deleted?
    The only records of the files project makes it the path...
    check the source file.

    If you navigate to the folder, they are saved in...
    the path must be restored. You should not
    to go to each photo. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Can not find the statistical record of free cell

    When I play Free Cell, at the end of the game, Windows 7 can not find the statistics file to save the results of the games which causes the game to break off and restart. I tried to remove free cell and restore without success. Can I replace the statistical record?

    I think that the statistics are stored in:

    C:\Users\\Appdata\Local\Microsoft Games\Freecell\Freecellsettings.xml

  • How can I move my contacts from "Windows Mail" app list in Vista to Windows Live Hotmail online? I can't find the Contacts file to download.

    How can I move my contacts from "Windows Mail" app list in Vista to Windows Live Hotmail online? I can't find the Contacts file to download. Why is it so difficult?

    Hi JohnKoelling,

    When you use Windows Live Hotmail and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

    Windows Live Solution Center Hotmail Portal

    http://windowslivehelp.com/product.aspx?ProductID=1

     

    I hope this helps.

Maybe you are looking for